Server Driver for NetWare 4.x 5.x 6.x
Introduction:
-------------
This document describes the procedure to install the NetWare
server driver for REALTEK RTL8169/8110 Family Gigabit Fast Ethernet adapter.
Location of Driver: \NWSERVER\RTGBSRV.LAN
Installation Procedures :
---------------------
Before you start with the installation process, make sure that
the Novell NetWare 4.x 5.x 6.x server is properly installed.
Similarly, your adapter should also be properly installed in your
server.
1. Insert the Realtek Driver Diskette into drive A and check the
contents of subdirectory \NWSERVER, It should contain the
following file :
RTGBSRV.LAN --> Novell NetWare Server Driver
RTGBSRV.LDI --> Novell NetWare Server Driver Installation
Information File
2. At the NetWare prompt (indicated by the Server name), run the
INSTALL.NLM program by typing:
server name: LOAD INSTALL <Enter>
3. Select "Maintenance/Selective Install" and press <Enter>.
4. Select " LAN Driver Options (Configure/Load/...) " and press
<Enter>.
5. Press the <Ins> key to specify other drivers to install.
6. Press <F3> and specify the driver path (A:\NWSERVER)
and press <Enter>.
7. The RTGBSRV.LAN driver should appear in your choice list for the
'Select a LAN Driver' field. Choose this driver to start the
driver loading and binding procedure. This will allow you to
load and bind all 4 frame types supported by NetWare.
8. Add the LOAD and BIND statements you require to the server's
AUTOEXEC.NCF file so that the LAN driver will load automatically
each time the server starts up.
Installation Notes:
-------------------
1.Installing Multiple LAN Adapters:
The keyword "SLOT" is provided for multiple LAN adapters in a
single server by the driver RTGBSRV.LAN. So, add EtherID in LOAD
commands. For example:
LOAD RTGBSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1
BIND IPX TO LAN_A NET=11
LOAD RTGBSRV FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2
BIND IPX TO LAN_B NET=22
2. The keyword "MEDIUMTYPE" is provided for specifying adapter's speed
(10M/100M/1000M), add MEDIUMTYPE in LOAD commands. For example:
MEDIUMTYPE=AUTO ----> Auto negotiation
MEDIUMTYPE=1000FULL ----> 1000M FullDuplex
MEDIUMTYPE=100FULL ----> 100M FullDuplex
MEDIUMTYPE=100HALF ----> 100M HalfDuplex
MEDIUMTYPE=10FULL ----> 10M FullDuplex
MEDIUMTYPE=10HALF ----> 10M HalfDuplex
LOAD RTGBSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 MEDIUMTYPE=AUTO
BIND IPX TO LAN_A NET=11
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.