[Platforms]
numplats=0
plat1= Generic $GEN
plat2=Desktop $DSK
[Generic]
numchanges=9
chng1=SET SYSTEM.INI 386Enh COM1Irq 4
chng2=SET SYSTEM.INI 386Enh COM1Base 3F8
chng3=SET SYSTEM.INI 386Enh COM2Irq 3
chng4=SET SYSTEM.INI 386Enh COM2Base 2F8
chng5=SET SYSTEM.INI 386Enh COM3Irq 5
chng6=SET SYSTEM.INI 386Enh COM3Base 3E8
chng7=SET SYSTEM.INI 386Enh COM4Irq 9
chng8=SET SYSTEM.INI 386Enh COM4Base 2E8
chng9=ShoSockBox TRUE
[DSK]
numchanges=0
[ADAPTER]
lastadapt=24
adapt1=SS365SL.EXE
adapt2=SSDBOOK.EXE
adapt3=SSDBOOK.EXE
adapt4=SSASCII.EXE
adapt5=SSASCII.EXE
adapt6=SSCIRRUS.EXE
adapt7=SSCIRRUS.EXE
adapt8=SSVLSI.EXE
adapt9=SSVADEM.EXE
adapt10=SSVADEM.EXE
adapt11=SSVADEM.EXE
adapt12=SS365LP.EXE
adapt13=SSIBM720.EXE
adapt14=SSOMEGA7.EXE
adapt15=SSELAN.EXE
adapt16=SSRICOH.EXE
adapt17=SSTI.EXE
adapt18=SSVIA.EXE
adapt19=SSTOPIC.EXE
adapt20=SSO2M.EXE
adapt21=SSSIS.EXE
adapt22=SSOMG094.EXE
adapt23=SSTPIC95.EXE
adapt24=SSHUNDAI.EXE
[HACMAJOR]
hacmfg=18
hac1=Adapter Unknown $UNK:1
hac2=Generic $GEN:1
hac3=Intel $INT:2
hac4=Databook $DAT:6
hac5=ASCII $ASC:2
hac6=Cirrus Logic $CIR:8
hac7=VLSI $VLS:2
hac8=Vadem $VAD:6
hac9=IBM $IBM:1
hac10=Omega Micro $OMG:3
hac11=AMD $AMD:1
hac12=Ricoh $RIC:4
hac13=Texas Instruments $TXI:3
hac14=VIA $VIA:2
hac15=Toshiba $TOS:2
hac16=02 Microsystems $02M:4
hac17=SiS $SIS:1
hac18=Hyundai $HYU:1
[HACMINOR]
UNK1=Do Not Install Socket Services $NULL
GEN1=Generic (non-Cardbus) $SS365SL.EXE
INT1=INTEL 365 (Generic) $SS365SL.EXE
INT2=INTEL 365 LOW POWER $SS365LP.EXE
DAT1=DB86082, DB86082A, $SSDBOOK.EXE
DAT2=DB86082B, DB86082B-es $SSDBOOK.EXE
DAT3=D86084, DB86184 $SSDBOOK.EXE
DAT4=DB8086A $SSDBOOK.EXE
DAT5=DB86072, DB86072-es $SSDBOOK.EXE
DAT6=DB87144 - Patriot $SSDBOOK.EXE
ASC1=J6941 $SSASCII.EXE
ASC2=J6942 $SSASCII.EXE
CIR1=CL-PD6710 $SSCIRRUS.EXE
CIR2=CL-PD6720 $SSCIRRUS.EXE
CIR3=CL-PD6722 $SSCIRRUS.EXE
CIR4=CL-PD6729 $SSCIRRUS.EXE
CIR5=CL-PD6730 $SSCIRRUS.EXE
CIR6=CL-PD6722ZV $SSCIRRUS.EXE
CIR7=CL-PD6730ZV $SSCIRRUS.EXE
CIR8=CL-PD6832 $SSCIRRUS.EXE
VLS1=VL82C146 $SSVLSI.EXE
VLS2=VL82C420 $SSVLSI.EXE
VAD1=VG230 $SSVADEM.EXE
VAD2=VG365 $SSVADEM.EXE
VAD3=VG465 $SSVADEM.EXE
VAD4=VG468 $SSVADEM.EXE
VAD5=VG469 $SSVADEM.EXE
VAD6=VG477 $SSVADEM.EXE
IBM1=IBM720 $SSIBM720.EXE
OMG1=82C722 $SSOMEGA7.EXE
OMG2=82C094 $SSOMG094.EXE
OMG3=82C194 $SSOMG094.EXE
AMD1=Elan SC300 $SSELAN.EXE
RIC1=RF5C266 $SSRICOH.EXE
RIC2=RF5C366 $SSRICOH.EXE
RIC3=RF5C296 $SSRICOH.EXE
RIC4=RF5C396 $SSRICOH.EXE
TXI1=TI1050 $SSTI.EXE
TXI2=TI1130 $SSTI.EXE
TXI3=TI1115 $SSTI.EXE
VIA1=VT83C465 $SSVIA.EXE
VIA2=VT83C469 $SSVIA.EXE
TOS1=ToPIC $SSTOPIC.EXE
TOS2=ToPIC95 $SSTPIC95.EXE
02M1=OZ-6722 $SS0MICRO.EXE
02M2=OZ-6729 $SS0MICRO.EXE
02M3=OZ-6730 $SS0MICRO.EXE
02M4=OZ-6832 $SS0MICRO.EXE
SIS1=SiS 5131 $SSSIS.EXE
HYU1=Hyundai 86722 $SSHUNDAI.EXE
[Comments]
;There are a few basic rules to follow for CWIZOEM.INI. There must ALWAYS be
;platforms listed by name and keyname in the .INI file. Ensure "numplats"
;matches the actual number for additional platforms. This kind of care
;translates to other sections. If there is no section for an individual
;platform, that platform is treated generically, and the installer will be
;prompted for data such as number of sockets.
;- THERE IS ALMOST NO ERROR CHECKING FOR THIS OEM FILE, EDIT CAREFULLY.
;- Platform and HAC (Socket Services) lines MUST have data separated by
; SPACES not Tabs. Tabs will not allow the full line to be read, and the
; operation will not work.
;
; The proper syntax for an Adapter List is:
;
; [Platforms]
; numplats=2
; plat1=Foofighter Inc. $FOO
; plat2=Lennox Corp. $LEN
; ^ ^
; | |
; ^MUST be spaces^
;
; Ensure there are enough spaces so that "$FOO" does not appear in the
; Platform dialogue box. A good rule of thumb is to place the "$NAME"
; at column 46.
;- There is only one possible OEM.Z file.
;- Cardsoft settings must be precluded by "Cardsoft" as exampled.
;- Only System.Ini and Cardid.Ini can be modified with REM, ADD, or SET.
;- REM will comment any line in the two .ini files.
;- SET will change or add a line, use only for UNIQUE values (ie. COM1IRQ).
;- ADD will add a line, use for non-unique lines (ie. device=).
;- To replace a device= line, use ADD and REM the offending line.
;- The [Generic] header will allow platform specification, and blanket .ini
; changes to all platforms. Any settings in [Generic] will be overwritten
; if repeated in the platform section.
; Possible Install Settings
; Unzip Filename to unzip additionally. One for [Generic]
; (for Reseller use). One for platform specific.
; The Reseller may use Three words after the filename
; which will display on the header when unzipping.
; ShoSockBox TRUE by default, or FALSE. This will make the
; Number of PCMCIA slots choice box appear or not
; appear.
; Possible CardSoft Settings
; PollSwitch 0 for set (?!), 1 for not set
; SktServ see list of adapter names below
; NumSockets 1 through 4
; WinStart 0 for put in Startup, 1 for not set
; PlatformName Matches the Platform String (after $)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.