Recommended Flash EPROM (BIOS) Management & Updating Procedures ============================================================================ Upon first use of the computer system: 1. Create a bootable system floppy diskette by typing [FORMAT A:/S] from the DOS prompt without creating "AUTOEXEC.BAT" and "CONFIG.SYS" files. 2. Copy PHLASH.EXE,PLATFORM.BIN, and BIOS files to your new diskette. 3. At the "A:\" prompt, type: [PHLASH BIOSIMAGE] and then the <Enter> key. WARNING: If the Flash Memory Writer utility was not able to successfully download a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service from your vendor. 4. Turn off your computer (press bottom more than 4 seconds) After successfully flashing the new BIOS. 5. Turn on your computer and hold down the <F2> key to enter BIOS setup. You must select "Setup Default" to affect the new BIOS, then you may set other items from the Menu. PHLASH.TXT 09/01/97Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.