****************************************************************************
* *
* PCMCIA Ethernet Adapter *
* *
* NIDS Driver for IBM LAN Server for DOS *
* *
* Ver. 2.04 *
* *
* README file *
* *
****************************************************************************
1. Introduction
This Ethernet NDIS driver for IBM LAN Server conforms to 3Com/Microsoft
LAN Manager Network Driver Interface Specification v2.0.1 (Final 1990-
10-8). It supports IBM LAN Server 3.0/4.0 for DOS environment.
2. Contents of the Subdirectory
RETH.DOS The NDIS2 driver.
RETH.NIF The network information file for NDIS driver.
OEMSETUP.INF A setup-information file for installing the Ethernet
NDIS driver under IBM LAN Server 4.0.
3. Installation
First install your PCMCIA Ethernet Card on the PC system following the
procedure in the Ethernet Adapter installation manual. Then skip to
the related section for your specific network application to continue
installing the NDIS driver.
* LAN Server 3.0 Installation
1) Insert "LAN Support Program Install" diskette to drive A: and the
Ethernet Driver Disk to drive B:.
2) At the A: prompt, type "DXMAID" and press <Enter>.
3) When the "Process Adapter Option Diskette" dialog box is displayed,
replace "A:\DOS" with "B:\IBMLAN.DOS", and press <Enter>.
4) When the Current Configuration screen appears (as shown below),
press <Tab> to select Adapter or Protocol window. Use Up and Down
arrow keys to move cursor; then press Space bar to select or deselect
selection.
Current Configuration
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄPrimary Adapter WindowÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ E2k/E1k/PCMCIA Ethernet Adapter with NDIS support ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄProtocol WindowÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ ³
³ IBM DOS NETBIOS Protocol for NDIS (DXMJ0MOD.SYS) ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄSelections for Adapter WindowÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ More -+ ³
³[X] E2k/E1k/PCMCIA Ethernet Adapter with NDIS support ³
³[ ] SMCDOSJP_MOD ³
³[ ] SMCDOSAT_MOD ³
³[ ] SMCDOSMC_MOD ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
5) While at the Current Configuration screen, press <F5> to view/change
parameters; then, press <F4>. You can press <Esc> to return without
saving changes.
6) Reboot your system.
* LAN Server 4.0 Installation (Using OEMSETUP.INF with DLS Installation)
1) Create a directory in the root of your fixed disk to place the OEM
drivers; for example, C:\RETHCOM. Then, copy all files from the
directory \IBMLAN.DOS of the Ethernet Driver Disk to the directory.
2) Install DOS LAN Services.
3) When you are prompted to select the type of your network card, select
"Network card not shown in list below", and then press <Enter>.
4) Insert the driver diskette where RETH.DOS is located.
5) Enter the path where the OEMSETUP.INF file is located when prompted
for. (Type the directory created in step 1.)
6) When "E2k/E1k/PCMCIA Ethernet Adapter" is displayed, press <Enter> to
continue.
7) Insert DOS LAN Services Disk 1 into the floppy drive used and press
<Enter>.
8) Check if the settings are correct.
9) When the installation is completed, press <F3> to exit. Check if
NDIS driver (i.e., RETH.DOS) exists in the same directory with your
DOS LAN Services, such as C:\NET.
If not, please copy it manually to the directory.
10) Reboot your system.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.