; ; This section contains the parameters for the Microdyne NE10/100 ISA Adpater. ; If you have multiple NE10/100 ISA adapters installed in this system, please ; make sure that the serial number for each adapter is correctly entered in ; the line "Serial= ". The serial number should be in the form of #nnnnnn, ; where nnnnnn is the last 6 digits of the MAC address that can be located on ; the lable on the adapter. If you have only one NE10/100 adapter in this ; system, you may use "#0" for the Serial keyword. ; ; For more information about parameters listed below, please run README.BAT ; on DISK 1 shipped with the adapter. ; DRIVERNAME=NE100I$ Serial=#0 MediaType=AUTO RxEarly=OFF Use32BitIO=NODownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.