1. CognacPhoenixBios3.079-17-01.exe Driver
2. RelNotes.txt File Contents

RelNotes.txt Driver File Contents (CognacPhoenixBios3.079-17-01.exe)

Technical Release Notes:
------------------------

3.07 09/17/01 
1) Fix the problem that when a CPU frequency multiplier that 
   is too high for unlocked CPU, the CMOS value can't be changed 
   until AC power cord is unplugged 
2) Fix the problem that if the PS/2 mouse or keyboard event 
   occurs while entering to S1 state then the PS/2 mouse or
   keyboard event can't awake the computer from S1 In the 
   W2K and WinXP.

3.06 08/30/01
1) Fix that the tualatin celeron(FSB 100MHz) processor is 
   recognized as the Pentium III type
2) Modify BIOS SETUP by HP XP BIOS spec. 3.02
   : Remove the options for floppy disk controller
3) Change the USB lowest wakeup capability from S4 to S1 
4) Fix the PnP OS option problem
   : The BIOS assigns IRQ to onboard device(audio codec) 
   even though PnP OS is enabled.

3.05 08/17/01
1) Fix the USB KB issue on boot menu 
   : The USB KBD doesn't work on Boot menu by ESC key
2) Fix the HCT 10.0 Error 
   : FoxFire test error - PME_status bit was not set to 1

3.04 08/10/01
1) Support Tualatin processor  
2) Make one BIOS for Fresno and Pinole
   :Decide LPC_PME pin by SIO GP40 (Fresno:GPI6, Pinole:GPI11)
3) The default language is controlled by the contents of 
   the DMI system product name string(New tattoo format is applied)
4) Fix the KBD/mouse wakeup event problem from WinXP S1 state
   :The user has to press a key(or mouse click) twice to wake-up from WinXP S1 state 
5) Fix the HCT 9.6 unreported memory error in Win ME
6) Modify BIOS SETUP by HP XP BIOS spec. 3.02
   - Remove 360KB and 1.2MB options in Legacy Diskette A menu
   - Add the option for onboard video memory
   - Remove the option for Large Disk Access Mode
   - PCI configuration menu shows by F11 key
   - Change the order of Removable Device Priority and Hard Drive Priority

3.03 07/19/01
1) display manufacturing ID of IDE
2) fix cheetah modem error under WinXP
3) change setup string "Installed O/S" to "Plug and Play OS"
4) change setup string "Frequency Ratio" to "CPU Multiplier"

3.02 07/10/01
1) Remove LBASSIST
2) Define SCI interrupt in APIC Table
   (to work Power button properly under APIC enabled)

3.01 06/29/01
1) Change GPI of LPC_PME#
2) Remove S3 option in the Setup

3.00 06/24/01  
Initial release