These files were taken from the original floppy (720k) labled:
ValueStore
floppy drive
software version 1.00
copyright 1992-1993 Valuestor, Inc
52-07512-01 Rev. A 081292 V
the card is a 8 bit ISA card with one large square chip marked:
N82077SL
L2390199 c
it is a Intel made chip
the card has a internal floppy connector labled (J1)
and a external female connector (J2)
default jumpers are: w7-w10 3 pin header jumpered on DS2-ME3
drive options w5 w6
0=open x=closed
w1 0xx
w2 oxx
w3 oxx
altadd 0xx
the card will control 360-1.44 floppy's only after the DRIVER LOADS!!!!
this card does not have a bios (30-09360-01 REV B)
(however some motherboards may be able to use this card via bios setup)
other versions do have a bios and can auto boot drives connected to the card.
last some dualspeed 1.2 5.25 drives must be jumpered to be single speed
(the drive spindle does not change speed when using 360/1.2 floppys)
if your sysgen card lacks the second xtal (which some models did not have)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.