README.TXT Driver File Contents (

*                                                                           *
*                      32-Bit PCI Fast Ethernet Adapter                     *
*                                                                           *
*                      Device Driver for SCO UNIXWARE 7                     *
*                                                                           *


  1. Plug 32-Bit PCI Fast Ethernet Adapter into one of the PCI slots.

  2. Boot the UnixWare 7 system and Login as root user.

  3. Put network driver diskette to floppy A: and use doscp command
     to copy the driver "rtspkg.Z".

       # mkdir temp
       # cd /temp
       # doscp a:/unixware.7/rtspkg.Z ./rtspkg.Z

  4. Run 'uncompress' and 'tar' utility to extract the driver.

       # uncompress rtspkg
       # tar -xvf rtspkg

  5. Add the package to the system using "pkgadd" command as follows: 

       # pkgadd -d /temp/pkg

         => Select "1 RTL813x" to add the driver package to the system.
         => quit

  6. Use netcfg utility to add LAN adapter.

       # netcfg

  7. To add adapters, select "Add new LAN adapter" from "Hardware".
     Select the "32-Bit PCI Fast Ethernet Adapter" and press "Continue".

  8. Select the TCP/IP protocol and "add" it to the system.

  9. Enter the "domain", "Host Name", "IP address" and "Netmask"

 10. The network configuration utility now configures the driver and binds
     it to upper layers of dlpi.

 11. Reboot unix.

         # cd /
         # shutdown -y -g0

 NOTE: 1. If you want to install more than one network adapter, you
          should do from the 6th steps above for each network card
       2. This driver can support up to four network adapters.

All trademarks or brand names mentioned are properties
of their respective companies.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.37