1. LAN.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (LAN.exe)

          SiS 900/7016 PCI Fast Ethernet Adapter Installation 

                           for NDIS Driver



LAN Manager v2.2

============================================

1. Execute the setup program in the LAN Manager directory.



     Type: >a:\setup



2. Choose "Network Drivers" from the "Configuration" field.

   Press <Enter> to confirm your choice.



3. Choose <Add New Config> and press <Enter> to display a list

   of Network Adapter Drivers.



4. Choose <Other Driver> and press <Enter>.



5. Insert the Driver Diskette into drive A:. Specify the drive 

   location of the diskette and select <OK> to proceed.



6. Select the appropriate Network Adapter Driver from the list.

   Select



        "SiS 900/7016 PCI Fast Ethernet Adapter"



   Select <OK> to confirm your choice.



7. To continue with the remainder of the installation, select a protocol 

   to use with the SIS 900/7016 PCI Fast Ethernet adapter driver.

   Continue with the remaining installation steps for Lan Manager.





Sample Configuration Files

==========================



  CONFIG.SYS File



        LASTDRIVE=Z

        BUFFERS = 35

        FILES = 35

        SHELL=C:\DOS62\COMMAND.COM C:\DOS62 /p /E:1024

        DEVICE=C:\HIMEM.SYS

        ; remark this line

        REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS 

        DEVICE=C:\DOS62\SETVER.EXE                       

        DOS=HIGH,UMB

        DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS

        DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\SIS900\SIS900.DOS



  PROTOCOL.INI File



        [PROTMAN]

         DRIVERNAME = PROTMAN$

         DYNAMIC = YES

         PRIORITY = NETBEUI

        [NETBEUI_XIF]

         Drivername = netbeui$

         SESSIONS = 6

         NCBS = 12

         BINDINGS = "SIS900_NIF"

         LANABASE = 0



        [SIS900_NIF]

        ;----------------------------------------------------------------------

        ; Sample Protocol.ini file for SIS 900 NDIS/2 driver

        ;----------------------------------------------------------------------

          DriverName = SIS900$

       

        ; End of this sample file



  AUTOEXEC.BAT File



        @echo off

        PROMPT $P$G

        PATH=C:\DOS;

        @REM ====== LANMAN 2.2 === DO NOT MODIFY BETWEEN THESE LINES

        @REM=== LANMAN 2.2 ===

        SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%

        NET START WORKSTATION

        LOAD NETBEUI

        @REM ====== LANMAN 2.2 === DO NOT MODIFY BETWEEN THESE LINES

        @REM === LANMAN 2.2 ===