1. HP-J2970A.zip Driver
2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (HP-J2970A.zip)

[data]
type=network
version="4.00.01"

[oemdisks]
Z=.,"HP DeskDirect PCI LAN Adapter Support Disk"

[netcard]
HPJ2970A="HP DeskDirect (J2970A) 10BaseT/2 PCI LAN Adapter",0,ndis,ethernet,real,HPFEND,HPJ2970A

[HPFEND]
devdir=Z:hpfend.dos
device=hpfend.dos,@devdir\hpfend.dos

; PROTOCOL.INI parameters.  All parameters are optional.
;
; If IOADDRESS given,   then adapter must be present at that I/O base address.
; If IOADDRESS missing, then driver scans I/O bus to find adapter.
; If ADAPTERSLOT given, then adapter must be in that slot.
; If ADAPTERSLOT missing, then driver scans I/O slots to find adapter.
;
; Please contact an authorized HP dealer before changing the parameters below.
; MAXICNEST    = maximum number of NDIS IndicationComplete upcalls, from the
;                driver to the protocol(s), that can be outstanding at any time.
; BUSMASTER    = bus master mode enable or disable
; NETADDRESS   = network address overide, which allows the modification of the
;                factory default Mac layer address.

[HPJ2970A_NIF]
drivername=HPFEND$
param=adaptertype,"Adapter Type",int,"3",3,0x2
param=adapterslot,"Adapter Slot",int,"1,15,1",,0x2
param=ioaddress,"Base I/O Address",hex,"0x400,0xFF00,0x100",,0x2
param=memorymapbase,"Memory-mapped Base Address",hex,"0xC800,0xEC00,0x0400",,0x2
param=maxicnest,"Maximum Nesting of Indication Completes",int,"1,4,1,",1,0x2
param=busmaster,"Bus Master enable/disable",text,"yes,no",yes,0x2
param=netaddress,"Net address overide",text,"080009010203",,0x2