1. Rino120_370.exe Driver
2. UPDATE.TXT File Contents

UPDATE.TXT Driver File Contents (Rino120_370.exe)

GARMIN Rino 120 Software Upgrade Information

------------------------------------------------------------

WARNINGS:
    If this software is uploaded to a GPS unit other than the product for
    which it is designed, you will not be able to operate that unit.

    If the upload software fails, verify that you have good batteries installed
    and try again.  If repeated upload attempts fail, you may need to return
    the unit to GARMIN for service.

------------------------------------------------------------

Instructions for uploading the new software to your Rino 120 using Microsoft
Windows 95/98/NT:

1.  Download the appropriate self-extracting archive file for your Rino 120 
    onto your hard drive.

2.  Unzip the files in the archive by running the downloaded executable file.

3.  Connect your Rino 120 to a free serial port (Com 1, 2, 3, or 4) on your PC 
    with a PC interface cable.

4.  Turn on your Rino 120 and ensure the Serial Data Format is set to "GARMIN". 
    You can find this setting in Main Menu -> Setup -> Interface.

5.  Change to the directory in which you unzipped the files, (i.e., C:\GARMIN),
    and run the update program, updater.exe.  Select the appropriate serial
    port and click "OK" to begin the software upload.
    
    During the upload, the Rino's display will indicate "SOFTWARE LOADING..."
    The upload process should take 5-10 minutes to complete. When the upload
    is completed, the Rino 120 will reset itself and turn on normally.

------------------------------------------------------------
Changes Made from Versions 2.04 to 2.10:

1. Fixed problem with navigation fields and compass pointer sometimes going blank 
   during navigation.

------------------------------------------------------------
Changes Made from Versions 2.10 to 2.20:

1. Allow user to disable power-on, power-off, and volume beeps by turning 
   message beeps off.

2. Allow user to adjust microphone sensitivity for internal and headset 
   microphones.  Microphone adjustments may be found by going to the Radio
   Setup page, selecting the Menu, and selecting Set Sensitivity...

3. Improved audio in headset when transmitting with VOX.

------------------------------------------------------------
Changes Made from Versions 2.20 to 2.30:

1. Key-lock now allows use of CALL key.

2. Fixed problem with invalid CODE being set for Channel 22.

3. Always restore previously used CODE after scanning is done.

------------------------------------------------------------
Changes Made from Versions 2.30 to 2.40:

1. Fixed potential problem with invalid codes being set after 
   scanning current codes is complete.

------------------------------------------------------------
Changes Made from Versions 2.40 to 3.00:

1. Increased time between position sending from 10 to 30 seconds 
   to comply with latest FCC ruling.

2. Added polling feature to request a position from another Rino 
   by pressing CALL button with the contact highlighted on the 
   Map page, or through menu option on Contact page.

3. Added setup item to Radio Setup page to disable poll response.

4. Moved Tone Setups to separate page off of Radio page menu.

------------------------------------------------------------
Changes Made from versions 3.00 to 3.10

1.  Minor display adjustments on Radio Setup and Tone Setup.

2.  Fixed problem with potential lockup occurring in GMRS mode
    in version 3.00.

------------------------------------------------------------
Changes Made from versions 3.10 to 3.20

1.  Improve WAAS/EGNOS satellite selection algorithm to select 
    the satellite with the most beneficial corrections given the 
    unit's current position. Units will not use a WAAS/EGNOS 
    satellite if the unit's current position is outside of a given 
    WAAS/EGNOS satellite's service volume.

2.  Fixed problem with incorrect waypoint date being displayed.

------------------------------------------------------------
Changes Made from versions 3.20 to 3.30

1.  Fixed potential memory corruption problem that could occur 
    when tracking more than one WAAS satellite simultaneously.

------------------------------------------------------------
Changes Made from versions 3.30 to 3.40

1.  Fixed problem with occasionally displaying MGRS coordinates
    improperly in "Big Number" mode.

2.  Added support for RCV_CPO data.

------------------------------------------------------------
Changes made from version 3.40 to 3.50

1.  Updated to support transfer of Proximity Waypoints with 
    Mapsource.

------------------------------------------------------------
Changes Made from Versions 3.50 to 3.60:

1.  Enabled GMRS on Canadian Rinos.

2.  Allow position sending on GMRS channels.

3.  Fixed bug where turning GMRS off and then back on would not update Radio page.

4.  Fixed potential problem with ring tones being used with position sending.

------------------------------------------------------------
Changes Made from Versions 3.60 to 3.70:

1.  Fixed problem where tones 7-10 were incomplete.

2.  Fixed problem where zooming would cancel measuring distance.