Quest2_250.txt Driver File Contents (Quest2_250.exe)

GARMIN Quest2 Software Upgrade Information
Software Version 2.50

http://www.garmin.com

------------------------------------------------------------

WARNINGS:
    If this software is uploaded to a unit other than the product for
    which it is designed, you will not be able to operate that unit.

    If multiple attempts to update the software fail, you may need to 
    return the unit to GARMIN for service.

    Reverting to previous software revisions will clear all user data.

------------------------------------------------------------

Instructions for uploading the new software to your Quest2 using 
Microsoft Windows 98, Windows ME, Windows 2000, or Windows XP:

1)	It is recommended that you disable screen savers or other programs running
	on your PC while you go through the update process. Disruptions to the
	update process may render your GPS inoperable. If the transfer is
	interrupted, turn off the GPS and then turn it back on. Reboot your PC, go
	to step #9 and attempt the download again. GARMIN is not responsible for
	failed downloads of operating software to the GPS and factory resetting the
	GPS unit will fall under our Flat Rate Repair Policy. 

2)	Click on "Download" and choose to save the file to your computer. 

3)	Choose a location where you can easily locate the file by saving it to a
	location such as the "My Documents" folder or to "C:\". 

4)	Once the download is complete, go to the location where you saved the file. 

5)	Locate the downloaded file and double-click on it. This will launch the
	Win-Zip Self Extractor. This program compresses the data to allow for a
	faster download of the needed files. 

6)	A program window will appear asking you where to "Un-zip" the files. This is
	by default C:\Garmin. You can change this location if you like. Be sure to
	note where the un-zipped files are going to allow you to find them! 

7)	Click on the button labeled "Un-zip". 

8)	Once the un-zip process is complete, click on the "Close" button to exit the
	Win-Zip Self Extractor. 

9)	Connect your GPS to your computer using a GARMIN PC Interface cable to an
	open USB port. Turn the GPS on. 

10)	If your computer asks for a driver, please see the software and installation
	instructions that came with your device, or download and install the USB driver
	from Garmin's website at www.garmin.com. 

11)	If your GPS supports configuration of the USB format, verify that the USB Format
	is set to GARMIN (refer to your owner's manual for instructions). 

12)	Open the C:\Garmin folder (or other folder where you un-zipped the files), locate
	the file named 'Updater' and double click on it. 

13)	You should see the name of your GPS device next to the 'USB Device' option on the
	Updater program window. Select the 'USB Device' option, then click on 'OK' on the
	Updater program window to start the data transfer. 

------------------------------------------------------------

Change from 2.40 to 2.50:

1)  Improved retrieval of current state/country in the address/intersection find.

2)  Added full extended postal code support.

3)  Added ability to search across multiple mapsets for address/intersections.

4)  Improved display of street names for the address/intersection search.

5)  Removed undesired exiting of data entry mode when entering streets in the address/intersection find.

6)  When reviewing a city the state will now be displayed.

7)  When downloading maps to Mapsource download the user loaded maps not the preloaded maps.

8)  Corrected issue with unit shutting down when accessing the custom poi category list.

9)  Improved route calculation speed

10) Enhanced timing and wording of voice prompts

------------------------------------------------------------

Change from 2.10 to 2.40:

1)	Added ability to perform find by name searches of My Locations

2) 	Corrected potential lockups and associated memory corruption associated with 
	performing points of interest searches 

------------------------------------------------------------
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.74