1. Quest_370.exe Driver
2. Quest_370.txt File Contents

Quest_370.txt Driver File Contents (Quest_370.exe)

GARMIN Quest Software Upgrade Information
Software Version 3.70

http://www.garmin.com

------------------------------------------------------------

WARNINGS:
    If this software is uploaded to a unit other than the product for
    which it is designed, you will not be able to operate that unit.

    If multiple attempts to update the software fail, you may need to 
    return the unit to GARMIN for service.

    Reverting to previous software revisions will clear all user data.

------------------------------------------------------------

Instructions for uploading the new software to your Quest using 
Microsoft Windows 98, Windows ME, Windows 2000, or Windows XP:

1)	It is recommended that you disable screen savers or other programs running
	on your PC while you go through the update process. Disruptions to the
	update process may render your GPS inoperable. If the transfer is
	interrupted, turn off the GPS and then turn it back on. Reboot your PC, go
	to step #9 and attempt the download again. GARMIN is not responsible for
	failed downloads of operating software to the GPS and factory resetting the
	GPS unit will fall under our Flat Rate Repair Policy. 

2)	Click on "Download" and choose to save the file to your computer. 

3)	Choose a location where you can easily locate the file by saving it to a
	location such as the "My Documents" folder or to "C:\". 

4)	Once the download is complete, go to the location where you saved the file. 

5)	Locate the downloaded file and double-click on it. This will launch the
	Win-Zip Self Extractor. This program compresses the data to allow for a
	faster download of the needed files. 

6)	A program window will appear asking you where to "Un-zip" the files. This is
	by default C:\Garmin. You can change this location if you like. Be sure to
	note where the un-zipped files are going to allow you to find them! 

7)	Click on the button labeled "Un-zip". 

8)	Once the un-zip process is complete, click on the "Close" button to exit the
	Win-Zip Self Extractor. 

9)	Connect your GPS to your computer using a GARMIN PC Interface cable to an
	open USB port. Turn the GPS on. 

10)	If your computer asks for a driver, please see the software and installation
	instructions that came with your device, or download and install the USB driver
	from Garmin's website at www.garmin.com. 

11)	If your GPS supports configuration of the USB format, verify that the USB Format
	is set to GARMIN (refer to your owner's manual for instructions). 

12)	Open the C:\Garmin folder (or other folder where you un-zipped the files), locate
	the file named 'Updater' and double click on it. 

13)	You should see the name of your GPS device next to the 'USB Device' option on the
	Updater program window. Select the 'USB Device' option, then click on 'OK' on the
	Updater program window to start the data transfer.

------------------------------------------------------------

Change from 3.50 to 3.70:

1)	Added audio support for Portuguese.

2) 	Corrected shutdown problem with destination on roundabout.
 

------------------------------------------------------------

Change from 3.40 to 3.50:

1)	Power management improvements.

2) 	Improved tracklog to provide more representative tracks.

3)	Updated various translations.

------------------------------------------------------------

Change from 3.30 to 3.40:

1)	Added support for version 3.00 audio languages.

------------------------------------------------------------

Changes from 3.00 to 3.30:

1)	Improved city searches to include entire state name if abbreviated version is
	not determined.

2)	Added ability to view depth markings on BlueChart data in preferred units.

3)	Corrected transfer of custom waypoint symbols from MapSource to the Quest.

4)	Corrected display of large German cardinal letters on the map page.

5)	Added display of tide stations.

6)	Improved ability to search addresses that contain extended (alphanumeric) house numbers.


------------------------------------------------------------

Changes from 2.90 to 3.00:

1)	Corrected problem that certain waypoint symbols would change when updating from 
	software version 2.80 or earlier. 

2)	Corrected various translations. 

------------------------------------------------------------

Changes from 2.80 to 2.90:

1)	Added motorcycle mount ear bud volume control.

2)	Prevented incorrect displaying of loader loading while navigating.

3)	Corrected address search issue when using old maps.

4)	Resolved many text language dependent shutdowns.

5)	Made routes with via points retain their via points if a detour is requested.

6)	Allow car and car repair symbols to be used for user waypoint symbols.

7)	Resolved issue with the turn review page displaying oriented incorrectly with no route line.

8)	Resolved issue with bearing field display diamonds (text language dependent).

9)	Resolved sporadic shutdowns while navigating.

10)	Fixed issue with the South Indonesian Grid.

11)	Made routes generated more consistent when starting from a point not on the road.

------------------------------------------------------------

Changes from 2.50 to 2.80:

1) 	Fixed issues relating to having the Portuguese & French languages selected.

2) 	Fixed case where address find returned no results because selected city was not in the selected region.

3) 	Fixed issue reading map data.

4) 	Improved robustness of the containing search.

------------------------------------------------------------