; /**************************************************************************** ; ** Copyright 2000, ALi Corporartion., All Rights Reserved. ** ; ** This file is the installation file for the M5261 Based Fast ** ; ** Ethernet Controller ** ; ** V1.06 ** ; ****************************************************************************/ [version] Signature = "$Chicago$" Compatible = 1 Class = Net ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318} Provider = %ALIR% DriverVer = 01/30/2003, 5.1.2600.01501 ;LayoutFile = layout.inf ;CatalogFile = ALILAN.cat [Manufacturer] %ALIR% = ALICOM ;One of This will be display [ControlFlags] ExcludeFromSelect = PCI\VEN_10B9&DEV_5261 ExcludeFromSelect = PCI\VEN_10B9&DEV_5261&SUBSYS_526110B9 ExcludeFromSelect = PCI\VEN_10B9&DEV_5261&SUBSYS_016817FF ExcludeFromSelect = PCI\VEN_10B9&DEV_5261&SUBSYS_52611849 [ALICOM] ; DisplayName Section DeviceID ; ----------- ------- -------- %ALI5261.DeviceDesc% = ALI5261.ndi, PCI\VEN_10B9&DEV_5261 %ALI5261.DeviceDesc% = ALI5261.ndi, PCI\VEN_10B9&DEV_5261&SUBSYS_526110B9 %ALI5261.DeviceDesc% = ALI5261.ndi, PCI\VEN_10B9&DEV_5261&SUBSYS_016817FF %ALI5261.DeviceDesc% = ALI5261.ndi, PCI\VEN_10B9&DEV_5261&SUBSYS_52611849 ;============================================================================= ; ; WIN9x ; ;============================================================================= [ALI5261.ndi] AddReg = ALI5261.id.reg, 5261.pci.reg, ALI5261.con.reg, ALI9.win.reg CopyFiles = ali9pci.win.CopyFiles ;============================================================================= ; ; WINNT specific entry ; ;============================================================================= [ALI5261.ndi.NT] Characteristics = 0x84 BusType = 5 AddReg = ALI5261.id.reg, ALI9PCI.reg, 5261.pci.reg, ALI5261.con.reg CopyFIles = ALI9PCI.CopyFiles [ALI5261.ndi.NT.Services] AddService = ALI5261, 2, ALI5261.Service, common.EventLog [ALI9PCI.CopyFiles] ALILAN.SYS,,,2 ;============================================================================= ; ; Win9x id registry sections ; These are not needed by NT ; ;============================================================================= ;Common [ALI5261.id.reg] ;Window200 Not used(NDI register) But Windows 98 Used HKR, Ndi, DeviceID, 0, "PCI\VEN_10B9&DEV_5261" ;Driver Read HKR,,AdapterPCIID,0,"526110B9" ;============================================================================= ; ; Win9x flags section ; Flags are not needed by NT ; ;============================================================================= ;**************************************************************************** ; PCI common parameters ;**************************************************************************** ;Common [5261.pci.reg] ;params ;Read in the Driver HKR, , AdapterType, 0,"5" HKR, , BusType, 0,"5" ;; PCI ;StoreAndForward HKR, Ndi\params\StoreAndForward, ParamDesc, 0,"Store And Forward" HKR, Ndi\params\StoreAndForward, default, 0,"1" HKR, Ndi\params\StoreAndForward, type, 0,"enum" HKR, Ndi\params\StoreAndForward\enum, 0, 0,"Disabled" HKR, Ndi\params\StoreAndForward\enum, 1, 0,"Enabled" ;Windows 2000 does not support Ndi\Params\param-key-name\flag values. ;HKR,NDI\params\StoreAndForward,flag,1,20,00,00,00 ;Transmit Threshold HKR, Ndi\params\TransmitThreshold, ParamDesc,,"Transmit Threshold" HKR, Ndi\params\TransmitThreshold, default, 0,"200" HKR, Ndi\params\TransmitThreshold, type, 0,"enum" HKR, Ndi\params\TransmitThreshold\enum, 48, 0," 72 bytes" HKR, Ndi\params\TransmitThreshold\enum, 60, 0," 96 bytes" HKR, Ndi\params\TransmitThreshold\enum, 80, 0," 128 bytes" HKR, Ndi\params\TransmitThreshold\enum, A0, 0," 160 bytes" HKR, Ndi\params\TransmitThreshold\enum, 100, 0," 256 bytes" HKR, Ndi\params\TransmitThreshold\enum, 200, 0," 512 bytes" HKR, Ndi\params\TransmitThreshold\enum, 400, 0,"1024 bytes" ;HKR,NDI\params\TransmitThreshold,flag, 1,20,00,00,00 ;ACPI Enable/Disable HKR,Ndi\params\ACPIEnable,ParamDesc,,"PME" HKR,Ndi\params\ACPIEnable,default,,"0" HKR,Ndi\params\ACPIEnable,type,,"enum" HKR,Ndi\params\ACPIEnable\enum,0,,"Disabled" HKR,Ndi\params\ACPIEnable\enum,1,,"Link Change" HKR,Ndi\params\ACPIEnable\enum,2,,"Magic Packet" HKR,Ndi\params\ACPIEnable\enum,3,,"Pattern Match" HKR,Ndi\params\ACPIEnable\enum,4,,"ALL" ;HKR,NDI\params\ACPIEnable,flag,1,20,00,00,00 [ALI5261.con.reg] ;Common ;ConnectionType HKR, Ndi\params\ConnectionType, ParamDesc, 0,"Connection Type" HKR, Ndi\params\ConnectionType, default, 0,"0" HKR, Ndi\params\ConnectionType, type, 0,"enum" HKR, Ndi\params\ConnectionType\enum, 0, 0,"AutoSense" HKR, Ndi\params\ConnectionType\enum, 2, 0,"100Mbps" HKR, Ndi\params\ConnectionType\enum, 4, 0,"100Mbps Full_Duplex" HKR, Ndi\params\ConnectionType\enum, 1, 0,"10Mbps" HKR, Ndi\params\ConnectionType\enum, 3, 0,"10Mbps Full_Duplex" ;HKR, NDI\params\ConnectionType, flag, 1,20,00,00,00 ;============================================================================= ; ; ALI5261 NT specific ; ;============================================================================= [ALI9PCI.reg] ;Point to Serivce Name HKR, Ndi, Service, 0, "ALI5261" ; use ndis5 as the upper bound because NT supports it ;Used in Win98 not in Windows 2000 HKR, Ndi\Interfaces, DefUpper, 0, "ndis5" HKR, Ndi\Interfaces, DefLower, 0, "ethernet" ;Upper driver and Lower adapter HKR, Ndi\Interfaces, UpperRange, 0, "ndis5" HKR, Ndi\Interfaces, LowerRange, 0, "ethernet" ;Langcy Driver used. Now useless HKR, ,WIN98Timer, 0,"0" [ALI5261.Service] DisplayName = %ALI9PCI.Service.DispName% ServiceType = 1 ;%SERVICE_KERNEL_DRIVER% StartType = 3 ;%SERVICE_DEMAND_START% ErrorControl = 1 ;%SERVICE_ERROR_NORMAL% ServiceBinary = %12%\ALILAN.SYS LoadOrderGroup = NDIS ;Service Section Call [common.EventLog] AddReg = common.AddEventLog.reg [common.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll" HKR, , TypesSupported, 0x00010001, 7 ;============================================================================= ; ; ALI5261 Win9x specific ; ;============================================================================= [ALI9.win.reg] HKR, , DevLoader, 0, "*ndis" HKR, , DeviceVxDs, 0, "ALILAN.SYS" HKR, NDIS, LogDriverName, 0, "ALI5261" HKR, NDIS, MajorNdisVersion, 1, 05 HKR, NDIS, MinorNdisVersion, 1, 00 HKR, , EnumPropPages, 0, "netdi.dll,EnumPropPages" ; memphis appears to not support the ndis5 upper range, so use ndis3 HKR, Ndi\Interfaces,DefUpper, 0, "ndis3,ndis4,ndis5" HKR, Ndi\Interfaces,DefLower, 0, "ethernet" HKR, Ndi\Interfaces,UpperRange, 0, "ndis3,ndis4,ndis5" HKR, Ndi\Interfaces,LowerRange, 0, "ethernet" HKR, ,WIN98Timer, 0,"1" ;============================================================================= ; ;Ndis driver selection ; ;============================================================================= HKR,Ndi\params\NdisVersion,ParamDesc,,"NDIS Version" HKR,Ndi\params\NdisVersion,default,,0 HKR,Ndi\params\NdisVersion,type,,enum HKR,Ndi\params\NdisVersion\enum,0,,"Auto Selection" HKR,NDI\params\NdisVersion,flag,1,20,00,00,00 ;============================================================================= ; ; DestinationDirs ; ;============================================================================= [ali9pci.win.CopyFiles] ALILAN.SYS [DestinationDirs] DefaultDestDir = 12 ALI9PCI.CopyFiles = 12 ali9pci.win.CopyFiles = 11 [SourceDisksNames] 50=%DISK_NAME%,,, [SourceDisksFiles] ALILAN.sys = 50, , 77 [Strings] ALIR = "ALi Corporation." ALI5261.DeviceDesc = "ALi PCI Fast Ethernet Controller" ALI9PCI.Service.DispName = "ALi Based Ethernet NT Driver" DISK_NAME = "ALi Drivers Disk "Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.