===================================================================
Avaya Inc May 2002
NDIS 5 USB Driver for MS Windows XP
Variant 2 Version: 7.62
===================================================================
This README.TXT covers information that was not yet known or
available when the user documentation shipped with this product
was written. It includes update information, additional
installation instructions, limitations to the current version of
the product, and suggestions to solve known issues or problems.
TABLE OF CONTENTS.
1. SOFTWARE DESCRIPTION
2. SYSTEM REQUIREMENTS
3. NEW IN THIS RELEASE
4. INSTALLATION NOTES
5. TECHNICAL CONSTRAINTS
6. KNOWN ISSUES
7. TECHNICAL SUPPORT
-------------------------------------------------------------------
1. SOFTWARE DESCRIPTION
1.1 About this software
This Driver supports the following network interface cards:
* "Wireless USB Card Model 0801"
* "SPEED TOUCH USB Card"
* "Avaya Wireless USB Card"
* "BUFFALO WLI-USB-L11 Wireless LAN Adapter"
* "BUFFALO WLI-USB-L11G Wireless LAN Adapter"
* "Compaq WL215 USB Adapter"
* "Compaq WLAN MultiPort W200"
* "ELSA AirLancer USB-11"
* "Joynet WLAN USB Card"
* "ORiNOCO USB Card"
* "Samsung SEW-2001u Card"
* "I-GATE 11M USB Card"
* "connect2AIR WLAN E-1100 USB"
* "2Wire Wireless USB adapter"
* "WLAN USB Card"
1.2 Files Installed
The following files will be installed in the Windows designated
directory:
NDIS 5 Miniport driver for Windows XP version 7.62
WLAGS51B.SYS
WLAGS51B.INF
WDAGS51B.DLL
WCAGS51B.EXE
WAAGS51B.DLL
-------------------------------------------------------------------
2. SYSTEM REQUIREMENTS
2.1 Operating System
This Driver is for the Microsoft Windows XP Operating System.
-------------------------------------------------------------------
3. NEW IN THIS RELEASE
3.1 Version 7.62 May 2002
* Introduction of driver variants
Variant 2 has been defined for two purposes:
1. to identify NDIS 5.1 drivers (NDIS 5.0 has variant 1)
Note that NDIS 5.0 and NDIS 5.1 are covered by NDIS 5
2. to identify NT4 Softex drivers (NT4 has variant 1)
Variant 2 drivers have a 'B' appended to the filenames
listed above.
Future variant 3 will have a 'C' appended.
Variant 1 has no 'A' appended.
* Fixed OHCI controller problem for USB drivers
* Drivers support both Variants of the USB Card.
Both old style Variant 1 (with embedded PC Card)
and new style Variant 2 (single board).
* For each OS a multi-brand INF file is generated.
As the name suggests, a multi-brand INF file contains
the card characteristics of various brands.
Multi-brand must not be confused with Combined, the latter
representing the card characteristics on various OS’es
for one brand.
* Various inconveniences w.r.t. Japanese help files
and screen texts have been resolved
* Stability issues have been resolved for
the Control Panel Applet
* Firmware 8.42 is used in the driver.
- Initial value for CurrentTXRate is 11 Mbps i.s.o. 2 Mbps.
3.2 Version 7.42 Winter 2002
This was the first release
-------------------------------------------------------------------
4. INSTALLATION NOTES
4.1 Standard Installation
Please refer to the 'Getting Started Guide' or 'User's
Guide' that came with your product.
-------------------------------------------------------------------
5. TECHNICAL CONSTRAINTS
None.
-------------------------------------------------------------------
6. KNOWN ISSUES
None.
-------------------------------------------------------------------
7. TECHNICAL SUPPORT
7.1 Finding Information
Consult your authorized reseller or manufacturer for more
information. Alternately consult our the Avaya Wireless Support
Web Site for the most recent device drivers and software updates
and user documentation.
World Wide Web: HTTP://SUPPORT.AVAYA.COM
7.2 Contact Technical Support
If you encounter problems when installing or using this
product, or would like information about our other
Wireless products, please contact your local Authorized
Wireless Reseller or Avaya Sales office.
Addresses and telephone numbers of the Avaya Systems
Sales offices are listed on WWW.AVAYA.COM.
===================================================================
END OF FILE
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.