I N T E L (R) P R O / W I R E L E S S 2 0 1 1 L A N
Product Version: 2.2
Date: January 2001
=======================================================================
Data Encryption*
=======================================================================
The Intel PRO/Wireless 2011 LAN PC Card and Access Point products are
capable of using 40-bit or 128-bit encryption schemes on data going to
and from the PC Card and Access Point. However, by default, data
encryption is turned off. To turn on data encryption, change the
Encryption setting via the adapter properties and the Access Point
Configuration.
To change the encryption for the PC Card select the adapter in the
Control Panel (or Device Manager in Windows 2000). Click Properties,
Advanced, and the Encryption tab. Change the Open setting to the
desired level of encryption.
To change the encryption for the Access Point refer to the Access
Point Product Reference Guide on the Intel CD.
======================================================================
Component Versions:
======================================================================
Utilities 2.2.0.7
Site Survey 2.2.0.5
Win32 Driver 2.2.5.10a
AP Embedded Web Site 2.0.0.4
WinCe Driver 2.2.5.0
To obtain the latest version of AP and MU firmware, download the
firmware from the Intel support site: http://support.intel.com.
============================================================
Known Issues:
============================================================
Removing Drivers in Windows 2000
- Before removing the driver, uninstalling the PRO/Wireless 2011
Utilities is highly recommended.
Hot-swapping Adapters in Windows ME
- If you hot-swap the adapter when the adapter is
reinserted, the Utilities tools will not bind or "see"
the adapter.
NicUpdate is not supported for PCI in this version
=====================================================================
Upgrading Drivers and Utilities to Version 2.2
=====================================================================
In Windows NT, Windows 95, and Windows 98:
1. Uninstall the driver for version 2.0.
2. Install the driver for version 2.2.
3. Reboot.
4. Install the Utilities tools for version 2.2.
In Windows 2000 and Windows ME:
1. Use the Update software from the operating system to update the driver.
2. Choose to install the 2.2 driver inf from the disk
2. Reboot.
3. Install the Utilities tools for version 2.2.
4. Reboot.
=====================================================================
How to run batch programs
=====================================================================
To run a program (with .bat or .exe extension):
From Windows, just double click on the file.
From the command prompt, type in the file name and press ENTER.
To install the Intel(R) PRO/Wireless 2011 LAN Utilities, run the Setup.exe
file from the "Utilities" folder.
=====================================================================
Driver Installation:
=====================================================================
Installing the Driver from the CD:
Windows (NT4.0 / 98 / 95):
If you are installing the driver into a WinNT or Win9x based machine,
point the path for the driver to the ROOT of the CD (ie. if your
CD-ROM is the D drive, then browse for "d:\"). This installs the
NDIS4 version of the driver.
Win 98 / ME:
If you want to install the NDIS5 version on a Win 98 based machine,
you must use the path "d:\ndis5"
Win 2000:
If you are installing the driver into a Win 2000 based machine, point
the path for the driver to the ROOT of the CD (ie. if your CD-ROM is
the D drive, then browse for "d:\").
====================================================================
Firmware Updates:
====================================================================
After updating the firmware (via NICUpdate) to your Intel PRO/Wireless 2011
LAN PC Card, Windows may recognize the card as a new device and automatically
invoke the Add New Hardware wizard. You are prompted to reinstall the adapter
driver and utilities software.
If this occurs, press Cancel to abort the new installation:
1. Deinstall the current adapter and driver via Windows Device Manager.
2. Remove the utilities software via the Control Panel-->Add/remove programs.
3. Restart Windows.
4. Reinstall the Intel PRO/Wireless 2011 LAN PC Card, as if you were
performing a new installation.
====================================================================
* This software is eligible for export from the U.S. and can be downloaded by or
otherwise exported or reexported worldwide EXCEPT to U.S. embargoed destinations
which include Cuba, Iraq, Libya, Yugoslavia, North Korea, Iran, Syria, Sudan,
Afghanistan or to any country or any person or entity prohibited from receiving
U.S. exports.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.