<=================================================================>
< Standard Microsystems Corporation >
< SMC EZ Card 10/100 (SMC1211TX) >
< WINDOWS NT 5.0 NDIS4 MINIPORT DRIVER INSTALLATION >
< >
< Copyright (C) 1998 Standard Microsystems Corporation >
< All Rights Reserved. >
<=================================================================>
The driver (SMC1211.SYS) contained in the directory WINNT is for
the following SMC1211TX PCI Ethernet adapter:
SMC EZ Card 10/100 (SMC1211TX)
The driver (SMC1211.SYS) conforms to the Network Driver Interface
Specification (NDIS) 4.0, and used with Microsoft Windows NT 5.0.
Contents:
---------
(0) Configuring EN1207D-TX PCI Adapter Media Mode
(A) Installing NDIS4 Miniport driver on Microsoft Windows NT 5.0
(B) Configuring NDIS4 Miniport driver on Microsoft Windows NT 5.0
(0) Configuring EN1207D-TX PCI Adapter Media Mode
===============================================
Before Installing your NDIS4 Driver, EN1207D-TX adapter can be set
in Full/Half Duplex mode.(Please reference SET1207D.TXT)
(A) Installing NDIS4 Miniport driver on Microsoft Windows NT 5.0
=================================================================
1. Plug SMC1211TX adapter into one of the Master PCI slot of
your PCI platform.
2. Turn power ON then boot from Windows NT 5.0.
3. Windows NT 5.0 will prompt "PCI Ethernet Controller" in
"New Hardware Found" dialog box.
4. Select "Search for suitable driver for your device(Recommand)"
from "Found New Hardware Wizard" dialog box, then click "Next"
button.
5. Select "Specify a location" from "Found New Hardware Wizard"
dialog box, then click "Next" button.
6. Insert the SMC1211TX Driver Diskette in your floppy drive.
7. Enter the driver pathname, i.e. A:\WNT50 (or B:\WNT50), then click
"OK" button from "Found New Hardware Wizard" dialog box.
8."Found New Hardware Wizard"dialog box will found inf file.
i.e. A:\WNT50\ACCNT.INF ,then click "Next" button.
9. Windows NT 5.0 will prompt "SMC EZ Card 10/100 (SMC1211TX)"
in "Found New Hardware Wizard" dialog box,then click "Finsh" button.
10. Windows NT 5.0 will prompt "New Connection" Wizard diag box
,then click "Next" button.
11. You can Modify or Add your LAN protocol or LAN Service...form "LAN
Wizard",and click "Next" button to continue.
12. Type a name you want for this connection form "LAN Wizard" diag box
,and click "Finsh" button.
13. Remove the SMC1211TX Driver Diskette from your floppy drive.
14. Restart your computer to take effect the network function.
Trademarks:
Microsoft Windows NT 5.0 is a trademark of Microsoft Corporation.
===End of File===
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.