1. 1211tx.zip Driver
2. SMCNT.INF File Contents

SMCNT.INF Driver File Contents (1211tx.zip)

;; SMCNT.INF
;;
;; SMC EZ Card 10/100 (SMC1211TX).
;;
;; Copyright 1998, Standard Microsystems Corporation
;;
;; Inf for NT 5.0

[version]
Signature   = "$Windows NT$"
Class       = Net
ClassGUID   = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider    = %Msft%
;LayoutFile  = layout.inf

[Manufacturer]
%V_SMC% = SMC

; All enumerated adapters must be excluded from select
[ControlFlags]
ExcludeFromSelect = PCI\VEN_1113&DEV_1211

[SMC]
; DisplayName           Section       DeviceID
; -----------           -------       --------
%EN5030.DeviceDesc%  = EN5030.ndi,  PCI\VEN_1113&DEV_1211

;----------------------------------------------------------------------------
; NT main sections
;

[EN5030.ndi.NT]
AddReg          = EN5030.reg, EN5030nt.reg, EN5030.medium.reg
Characteristics = 0xA4 ; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL
BusType = 5

[EN5030nt.reg]
HKR, Ndi\Interfaces,            DefUpper,   0, "ndis5"
HKR, Ndi\Interfaces,            DefLower,   0, "ethernet"
HKR, Ndi\Interfaces,            UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces,            LowerRange, 0, "ethernet"

;----------------------------------------------------------------------------
;

[EN5030.reg]
HKR, Ndi,                       Service,    0, "EN5030"
HKR, Ndi\Install,               ,           0, "EN5030.Install"

;[EN5030.netadd.reg]

;HKR,Ndi\params\EtherID,ParamDesc,0,"Ethernet ID"
;HKR,Ndi\params\EtherID,type,0,edit
;HKR,Ndi\params\EtherID,default,0,"000000000000"
;HKR,Ndi\params\EtherID,LimitText,0,12
;HKR,Ndi\params\EtherID,UpperCase,0,1
;HKR,Ndi\params\EtherID,Optional,0,1

[EN5030.medium.reg]
;HKR,NDI\Params\DuplexMode,flag,1,30,00,00,00

HKR,Ndi\params\DuplexMode,ParamDesc,0,"Link Speed/Duplex Mode"
HKR,Ndi\params\DuplexMode,type,0,enum
HKR,Ndi\params\DuplexMode,default,0,0
HKR,Ndi\params\DuplexMode\enum,0,0,"Default"
HKR,Ndi\params\DuplexMode\enum,1,0,"Auto Mode "
HKR,Ndi\params\DuplexMode\enum,2,0,"10Half Mode"
HKR,Ndi\params\DuplexMode\enum,3,0,"10Full Mode"
HKR,Ndi\params\DuplexMode\enum,4,0,"100Half Mode"
HKR,Ndi\params\DuplexMode\enum,5,0,"100Full Mode"

[EN5030.Install.NT]
CopyFiles = EN5030.CopyFiles

[EN5030.Install.NT.Services]
AddService = EN5030, 2, rtsnt.Service, EN5030.EventLog

[EN5030.CopyFiles]
smc1211.sys,,,2 ;Do not allow the user to skip this file!

[rtsnt.Service]
DisplayName     = %EN5030.Service.DispName%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 3 ;%SERVICE_AUTO_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %12%\smc1211.SYS
LoadOrderGroup  = NDIS
AddReg          = TextModeFlags.reg

[EN5030.EventLog]
Addreg = EN5030.AddEventLog.reg

[EN5030.AddEventLog.reg]
HKR,    ,   EventMessageFile,   0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR,    ,   TypesSupported,     0x00010001, 7

[TextModeFlags.reg]
HKR, , TextModeFlags, 0x00010001, 0x0001

;----------------------------------------------------------------------------
; DestinationDirs
;
[DestinationDirs]
EN5030.CopyFiles  = 12

[Strings]
Msft      = "Microsoft"
V_SMC   = "SMC"

EN5030.DeviceDesc   = "SMC EZ Card 10/100 (SMC1211TX)."

EN5030.Service.DispName  = "SMC EZ Card 10/100 (SMC1211TX) NT Driver"