FishFinder 100 Software Version 2.10
------------------------------------------------------------
To view the software version, complete the following steps:
1. Press the SETUP key.
2. Select the Mem tab.
3. Select the Software Version button and press enter.
------------------------------------------------------------
Warnings:
If this software is uploaded to a unit other than the product for
which it is designed, you will not be able to operate that unit.
If repeated software upload attempts fail, you may need to return
the unit to GARMIN for service.
------------------------------------------------------------
Notes:
------------------------------------------------------------
Change History:
Version 2.06 to 2.10:
1. Updated the French translation.
2. Updated the company name text and copyright.
---------------------
Version 2.05 to 2.06:
1. Turn off transmitter if unit is powered on in an overvoltage condition.
---------------------
Version 2.04 to 2.05:
1. Improved transmitter performance.
----------------------
Versions 2.03 to 2.04:
1. Added multiple language support.
----------------------
Versions 2.02 to 2.03:
1. Improved life of nonvolatile storage.
----------------------
Versions 2.01 to 2.02:
1. Improved factory test support.
----------------------
Versions 2.00 to 2.01:
1. Improved factory test support.
----------------------
Version 2.00 is the initial release version.
------------------------------------------------------------
Upload Instructions:
Instructions for uploading the new software to your FishFinder using Microsoft
Windows 95/98/NT:
1. Download the appropriate self-extracting archive file onto your hard drive.
2. Unzip the files in the archive by running the downloaded executable file.
3. Connect your unit to a free serial port (Com 1, 2, 3, or 4) on your PC with
a PC interface cable.
4. Turn on your unit and ensure NMEA Output is set to "OFF". You can find this
setting in the Setup menu on the "Sys" tab.
5. Change to the directory in which you unzipped the files, (i.e., C:\GARMIN),
and run the update program, updater.exe. Select the appropriate serial
port and click "OK" to begin the software upload.
During the upload, the display will indicate "Software Loading...."
The upload process should take 2-5 minutes to complete. When the upload
is completed, the unit will reset itself and turn on normally.
------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.