1. Pro200WL.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (Pro200WL.exe)

                     OS/2 Warp Server Remote Boot Service 
                              Installation Guide
                     ====================================
     

Install the OS/2 RIPL Server
============================
 1. Install the Remote boot Service on the OS/2 Server.

    a. Insert "OS/2 Warp Server V4.0 Advanced" CD in the CD-Drive.

    b. Choose LAN Services, OS/2 LAN Services installation/Configuration,
       Advanced(Tailored), install or configure this workstation, Domain
       Controller, LAPS Configuration -> select OK,  install or remove
       a component, select "DOS Remote IPL Service" and install.
    
    Note: LAN adapter and protocol support must have IBM IEEE 802.2, NetBIOS.

 2. Install IBM PC DOS files for Remote boot workstation.

    Config DOS Remote IPL Service, Duplicate DOS? -> YES, configure LAN adapter,
    NetBIOS Resource -> OK, insert IBM PC DOS 6.3 and duplicate the DOS image,
    Shutdown/Restart your system.

3. Create Remote boot configuration for new adapter.

   a. Copy the NDIS2 DOS driver for the CNet PRO200WL PCI Fast Ethernet Adapter,
      DM9PCI.DOS, to the directory, \IBMLAN\RPL\DOS.

   b. Modify the RPL.MAP in the \IBMLAN\RPL by removing the mark ";" of
      dosndet.cnf or dosbbet.cnf. In OS/2 Screen, type "GETRPL" to update the
      RPL.MAP.

   c. Create the DOS image file.
      Choose 'LAN Services', 'LAN Server Management', 'Local Workstation', 'DOS
      image definition', 'select STD3HBAS', and 'Selected Item ->in the create
      image to server menu'. Pull down the 'Destination Server column' on the
      right corner, and click the <OK> button.

   e. Return to Local Workstation menu. Select RIPL Requester, RIPL Requester 
      Template. Select to Create another RIPL Requester template,
      Identity: Enable DOS requester, fill MachineID and Network Adapter
                address.

      Note: The network adapter address should be the 6-byte MAC ID of the
            remote booting client station.
            Parameters: Server record id -> pull down to select R_DET_NDIS for
                        dosndet or R_DET for dosbbet.cnf.
            Remote IPL boot driver: Z (use for bootup drive)
  
      After setting finished, choose "Create" to create the new template.

   f. Modify \IBMLAN\RPL\DOSNDET.CNF(DOSBBET.CNF) by changing
      DRV DOS\MACETH.DOS to DRV DOS\DM9PCI.DOS

      Sample for DOSNDET.CNF:
      ; DOS Boot Block Configuration (IBM PS/2 Adapters for Ethernet)
      ; NDIS LAN Support Program Drivers
      BASE 7C0H
      RPL DOS\RPLBOOT.SYS
      LDR DOS\RPLLOADR.COM ~
      DAT DOS\ETHERNET\PROTOCOL.INI
      DAT E:\IBMLAN\DOSLAN\LSP\DXM.MSG
      EXE E:\IBMLAN\DOSLAN\LSP\NETBIND.COM ~ ~ ~
      ;**NETBIOS and IEEE 802.2*******************************************
      ;DRV E:\IBMLAN\DOSLAN\LSP\DXMT0MOD.SYS PBA=0~S=12~ST=12~C=14~O=N ~ ~
      ;DRV E:\IBMLAN\DOSLAN\LSP\DXME0MOD.SYS ~ 10 ~
      ;**NETBIOS and IEEE 802.2*******************************************
      ;
      ;**NETBIOS**********************************************************
      DRV E:\IBMLAN\DOSLAN\LSP\DXMJ0MOD.SYS ~ 17 ~
      ;**NETBIOS**********************************************************
      DRV E:\IBMLAN\DOSLAN\LSP\DXMA0MOD.SYS 001 ~ ~
      DRV DOS\DM9PCI.DOS ~ ~ ~
      DRV E:\IBMLAN\DOSLAN\LSP\PROTMAN.DOS /I: ~ ~

   g. Modify IBMLAN\RPL\DOS\PROTOCOL.INI by changing
      [MACETH_MOD]
        DriverName = MACETH$ 
              to
        DriverName = DM9PCI$

      Sample for PROTOCOL.INI:
      [PROTMAN_MOD]
        DriverName = PROTMAN$
      [DXMJ0_MOD]
        DriverName = NETBEUI$
        Bindings = MACETH_MOD  
      [DXME0_MOD]
        DriverName = DXME0$
        Bindings = MACETH_MOD
      [MACETH_MOD]
        DriverName = DM9PCI$
      ;=== unmark the followings ===
      ; IRQ = 3
      ; RAMADDRESS = 0Xc800
      ; IOBASE = 0X200
      ; RECEIVEBUFFERS = 16
      ; RECEIVECHAINS = 16
      ; MAXREQUESTS = 10
      ; MAXTRANSMITS = 10
      ; RECEIVEBUFSIZE = 256

4. In OS/2 Screen, type "NET START RPL" Start the Remoteboot service. 

5. If you want to start the remote boot automatically after OS/2 server boot
   up, please modify \IBMLAN\IBMLAN.INI by adding SRVSERVICES=REMOTEBOOT.