GARMIN eTrex, eTrex Camo, & eTrex Summit Software Upgrade Information http://www.garmin.com ------------------------------------------------------------ WARNINGS: Be sure to backup all data like routes, waypoints and track with MapSource before updating the software. Once the eTrex has been updated you can use MapSource again to restore your data. Uploading software versions older than what is currently in your eTrex can cause all stored data to be erased. If this software is uploaded to a GPS unit other than the product for which it is designed, you will not be able to operate that unit. If the upload software fails, verify that you have good batteries installed and try again. If repeated upload attempts fail, you may need to return the unit to GARMIN for service. ------------------------------------------------------------ Instructions for uploading the new software to your eTrex using Microsoft Windows 95/98/NT: 1. Download the appropriate self-extracting archive file for your eTrex onto your hard drive. 2. Unzip the files in the archive by running the downloaded executable file. 3. Connect your eTrex to a free serial port (Com 1, 2, 3, or 4) on your PC with a PC interface cable. 4. Turn on your eTrex and ensure the Format is set to "GARMIN". You can find this setting on the "Interface" system setup tab page. 5. Change to the directory in which you unzipped the files, (i.e., C:\GARMIN), and run the update program, updater.exe. Select the appropriate serial port and click "OK" to begin the software upload. During the upload, the eTrex display will indicate the software is loading. The upload process should take 1-5 minutes to complete. When the upload is completed, the eTrex will reset itself and turn on normally. ------------------------------------------------------------ Changes Made From Versions 3.00 to 3.30: 1. Improved WAAS visibility and selection algorithm. 2. Corrected RTCM support. 3. Corrected support for the $HCHDG NMEA sentence (Summit only).Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.