MDI Device Driver for National DP83820, Gigabit NIC on SCO OpenServer 5.0.5 =========================================================================== Overview: ========= This file explains how to build, install and configure the MDI driver. Building the Driver Software ============================ a) Bring up a system which runs SCO OpenServer 5.0.5 b) Install "SCO OpenServer Development System version 5.1.1A" pkg. This pkg is available in SCO OpenServer 5.0.5 CD. c) Create a directory /home/nsc/drv and unarchive <xxxxx>.cpio.Z # uncompress <xxxxx>.cpio.Z # cpio -icVd < <xxxxx>.cpio d) To build, from /home/nsc/drv issue # make clean # make make creates Driver.o Installation and Configuration ============================== Manual Installation of the driver --------------------------------- a) Poweroff your system and install the card in a PCI Bus Mastering slot. b) Power on the system. c) Copy DSP (Driver Software Package) files to /var/opt/K/SCO/lli/5.0.5a/ID/dp # mkdir -p /var/opt/K/SCO/lli/5.0.5a/ID/dp/AOF # cd /home/nsc/drv # cp System Master Node Driver.o Space.c lkcfg /var/opt/K/SCO/lli/5.0.5a/ID/dp # cp AOF/dp /var/opt/K/SCO/lli/5.0.5a/ID/dp/AOF Configuring the Driver : ----------------------- a) After installation of the driver, run "netconfig" and add the desired chain. Select, Hardware -> Add new LAN Adapter -> National Semiconductor's Gigabit Ethernet Adapter DP83820 b) Choose the appropriate protocol (SCO TCP/IP) . c) Fill in TCP/IP Configuration parameters like IP Address, NetMask, Domain Name etc.. d) Netconfig will prompt you for relinking the kernel while exiting. Choose Yes for relinking the kernel. e) Reboot the system after relinking the kernel. Packaging of SCO Openserver driver --------------------------------- Requirements ------------ 1. You should install O5ndsampl package which is downloadable from www.sco.com/hdk/testsuites After installing the O5ndsampl package, Please refer to the /usr/src/O5hdk/net/README file for the detailed step. You have to modify the /usr/src/O5hdk/net/Make.inc file for the following variables. PRODDESC=National DP83820 Gigabit Ethernet Adapter PRODVENDOR=National DLIST=dp make floppy will create a custom format volume of the driver package.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.