Windows NT 3.51 & 4.0
Introduction:
-------------
This document describes the procedure to install Windows NT v3.51 & v4.0
driver for DE-528 PCI ethernet adapter.
The Windows NT CD/disks are need to complete this installation
Location of Driver: \WINNT\DE528.SYS
Installing driver procedure on Microsoft Windows NT 4.0:
--------------------------------------------------------
When you are in Windows NT :
1. In the Main group of NT, select the "Control Panel" icon.
2. In the Control Panel window, choose the "Network" icon.
3. In the Network Settings dialog box, choose the "Add Adapter" button.
The Add Network Adapter dialog box appears.
4. In the list of network cards, select "<other> Requires disk from
manufacturer", and then press <Enter> button.
5. Insert the DE-528 driver disk in drive A, enter drive and pathname
A:\ which is the path where the
setup file OEMSETUP.INF is located, and then choose the OK button.
6. The screen will appear "Input EthernetID" dialog box which is provide
by DE528.SYS driver. This option is only required when you have
more than one DE-528 PCI LAN adapters on this computer.
Select SKIP if only one adapter is installed on this computer.
7. "Bus Location" display in next screen. Your machine contains more
than one hardware bus, please select the Bus Type and Bus number on
which your network adapter card is installed.
8. NT will then perform the binding process. If any additional network
software options were installed, you may be prompted for specific
information for these packages.
9. Restarting your system you will acquire network service.
Installing driver procedure on Microsoft Windows NT 3.51:
---------------------------------------------------------
1. From the "Main" window, select Control Panel.
2. In the Control Panel, select Network Icon.
3. In the Network Setup, select Add Adapter
4. Windows NT will display a list of all available drivers.
5. Select "OTHERS" for third-party adapters not included in the
list.
6. The program prompts for the directory containing the Ethernet
drivers.
Insert the driver diskette in Drive A, and then type
the following:
A:\
7. Windows NT will attempt to locate the OEMSETUP.INF file in the
specified path. If it exists there, Windows NT will then copy
the appropriate drivers to the Windows NT system.
8. The drivers are now properly installed. The installation
procedure will then proceed to the next steps. Please refer to
your Windows NT installation guide for information on these
steps.
NOTES:
------
* Installing Multiple LAN Adapters:
Enter Windows NT and follow above setup procedure step 2,in the
"Network Settings" dialog box, choose the "Configure.." button.
The "Input Ethernet ID" dialog box appears and input adapter's
Ethernet ID. Last step to select OK and close NETWORK SETUP.
Select SKIP if only one adapter is installed on this computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.