1. ccard23pc.zip Driver
2. Lan.inf File Contents

Lan.inf Driver File Contents (ccard23pc.zip)

; NET.INF
;
; PCMCIA Network Interface Cards.
;

[Version]
Signature="$Windows 95$"
Class=Net
Provider=%APOLLO%
LayoutFile=layout.inf

;
; Table of Contents
;
[Manufacturer]
%APOLLO%=APOLLO

;
; The various flavors of PCMCIA cards
;
[APOLLO]
%LE10X%=Dayna.ndi,PCMCIA\Dayna_Communications__Inc.-CommuniCard_E-87C1
%LE10X%=LE10X.ndi,PCMCIA\Dayna_Communications__Inc.-CommuniCard_E-F103
;For 926 Chip
%LE10X%=Dayna.ndi,PCMCIA\Dayna_Communications__Inc.-CommuniCard_E-0DAE

[Dayna.ndi]
LogConfig=LE10X.LogConfig
AddReg=Dayna.ndi.reg,ne2000.ndi.reg,Clone.params.reg

[LE10X.ndi]
LogConfig=LE10X.LogConfig
AddReg=LE10X.ndi.reg,ne2000.ndi.reg,Clone.params.reg

[LE10X.LogConfig]
IRQConfig=3,4,5,7,9,10,11,12,13,14,15
IOConfig=20@200-3FF%FFE0(3FF::)
ConfigPriority=HARDRECONFIG


;****************************************************************************
;    PCMCIA  Ethernet Card
;****************************************************************************

[LE10X.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\Dayna_Communications__Inc.-CommuniCard_E-F103"
HKR,Ndi,CardType,,"PCMCIA"
HKR,Ndi,MatchAndMoveID,,"*pnp80d6,*pnp80d4"

[Dayna.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\Dayna_Communications__Inc.-CommuniCard_E-87C1"
;For 926 Chip
HKR,Ndi,DeviceID,,"PCMCIA\Dayna_Communications__Inc.-CommuniCard_E-0DAE"
HKR,Ndi,CardType,,"PCMCIA"
HKR,Ndi,MatchAndMoveID,,"*pnp80d6,*pnp80d4"


;****************************************************************************
; ne2000 Drivers
;****************************************************************************
; Base section for ne2000 users
[ne2000.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,LE10NDS.sys
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; NDIS Info
HKR,NDIS,LogDriverName,,"LE10NDS"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A
; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"
; Install sectioins
HKR,Ndi\Install,ndis3,,"LE10X.ndis3"

; Install NDIS3
[LE10X.ndis3]
CopyFiles=LE10X.ndis3.CopyFiles
[LE10X.ndis3.CopyFiles]
LE10NDS.sys

; extra params for clones
[Clone.params.reg]
; Resources
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00
HKR,Ndi\params\interruptNumber,ParamDesc,,"Interrupt Level"
HKR,NDI\params\InterruptNumber,flag,1,60,00,00,00
HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00
HKR,NDI\params\IOBaseAddress,ParamDesc,,"I/O Base Address"
HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00

[SourceDisksFiles]
LE10NDS.sys = 55

[SourceDisksNames]
;NOTE: USE ONLY DISK NUMBERS 55-59
55 = "Ethernet Installation Disk", "", 0000-0000

[DestinationDirs]
DefaultDestDir             = 11         ; LDID_SYS
LE10X.ndis3.CopyFiles    = 11


;****************************************************************************
; Translatable strings
;****************************************************************************

[Strings]
MS="Microsoft"

;
; Manufacturer names
;
APOLLO="Dayna Communications, Inc."

;
; Adapter names
;
LE10X="CommuniCard Ethernet Adapter"