Server Driver for NetWare 3.11
Introduction:
-------------
This document describes the procedure to install the NetWare v3.11
server driver for PCI Ethernet adapter.
Location of Driver: \NETWARE\SERVER\31X\PCISRV.LAN
Installation Procedure:
-----------------------
Before you start the installation process, make sure that
the Novell NetWare 386 v3.11 server is properly installed.
Similarly, your adapter should also be properly installed in your
server.
1. Copy all PCISRV.LAN related files from this Driver Diskette
subdirectory A:\NETWARE\SERVER\31X into the NetWare 386 SERVER
hard disk. (If some files exists, rename the existing files).
2. Run SERVER.EXE from your server. You will see a series of
NetWare messages on screen.
3. When the NetWare 386 prompt appears (indicated by a colon), load
your server driver. Simply type:
: LOAD C:\SERVER.311\LSLENH <Enter>
: LOAD C:\SERVER.311\PCISRV <Enter>
4. Bind IPX to the adapter driver. At the NetWare server prompt,
type:
:BIND IPX TO PCISRV <Enter>
5. After you press <Enter>, the computer prompts you the Network
Number. For details on how to assign this number, please refer
to your NetWare 386 Installation Manual.
6. Add the load and bind statements you require to the server's
AUTOEXEC.NCF file so that the LAN driver will be loaded
automatically once the server starts up.
NOTES:
------
1. Installing Multiple LAN Adapters:
The keyword "EtherID" is the ethernet ID of a adapter. This
keyword is provided for multiple LAN adapters in a single server
by the driver PCISRV.LAN. So, add EtherID in LOAD commands. For
example:
LOAD PCISRV EtherID=0000B4000001 FRAME=Ethernet_802.2 NAME=LAN_A
BIND IPX TO LAN_A NET=11
LOAD PCISRV EtherID=0000B4000002 FRAME=Ethernet_802.3 NAME=LAN_B
BIND IPX TO LAN_B NET=22
2. Installing One LAN Adapter with Multiple Frame Types:
When binding multiple frame types to one adapter, enter a LOAD
and BIND statement for each frame type. Each LOAD statement will
use a different network number is required on the bind statement.
You need to supply a name on each load line in order to avoid
being prompted for which board to bind IPX to. If you do not
have the name option in the AUTOEXEC.NCF , it will not execute
completely without user intervention. Example:
LOAD PCISRV FRAME=ETHERNET_802.3 NAME=IEE8023
BIND IPX TO IEE8023 NET=77777
LOAD PCISRV FRAME=ETHERNET_802.2 NAME=IEE8022
BIND IPX TO IEE8022 NET=88888
If any problem occurs during the binding process, the screen will display
the error messages. Please refer to your NetWare 386 manual for
details on these messages.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.