1. Opti_Audio_16.exe Driver
2. CONFIG.TXT File Contents

CONFIG.TXT Driver File Contents (Opti_Audio_16.exe)

             Procomp PM-S240 AUDIO DEVICE CONFIGURATION HELP MENU

COMBO BOX FUNCTION AND HARDWARE CONFIGURATION DESCRIPTIONS

    -----------------
    Sound Blaster Pro (for SB Pro Mode Only)
    -----------------

    I/O Port        SB Pro I/O Port selections:
                      *220, 240
    IRQ             SB Pro Interrpt Address selections:
                      *5, 7, 10
    DMA             SB Pro DMA Channel selections:
                      *1, 0, 3

    Note: 8-bit Sound Test in the Sound Test Window can be used to 
          test Sound Blaster Pro Mode regardless of what the Current 
          Mode setting is.

    --------------------
    Windows Sound System (for WSS Mode Only)
    --------------------

    I/O Port        WSS I/O Port selections:
                      *530, E80, F40, 604
    IRQ             WSS Interrpt Address selections:
                      *7 ,11, 9, 10, 5
    DMA             WSS DMA Channel selections:
                      *0, 1, 3, 0/1, 1/0, 3/0 

    There are 2 modes for DMA selections:

    [Single DMA]: uses a single DMA channel 
                  for DMA playback and capture.

    [Dual DMA]:   Allows to playback and record
                  at the same time.
                  0/1, 1/0, 3/0 are the Dual DMA 
                  selections. The first one is
                  for Playback. 2nd: recording.

    Note: 16-bit Sound Test in the Sound Test Window can be used to 
          test Windows Sound System Mode regardless of what the 
          Current Mode setting is. 

    ----------------
    MPU401 Interface
    ----------------

    MPU401 is the industrial standard interface
    for MIDI (Music) devices such as keyboards
    and some Wave Table Synthesizer devices.

    Interface       External MIDI enable or disable selections:
                      *OFF,ON
    I/O Port        External MIDI I/O Port selections:
                      *330, 300, 320
    IRQ             External MIDI Interrupt Address selections:
                      *9, 5, 7

    ----------------
    CD-ROM Interface
    ----------------

    Your sound card also could be used as a
    CD-ROM interface card to hook up to SONY,
    MITSUMI, PANASONIC and IDE compatible 
    CD-ROM drives.

    CD Type         CD-ROM selected drive type.
                    *NONE or CD-ROM drive types...
    I/O Port        ** CD-ROM selected I/O port.
    IRQ             ** CD-ROM selected Interrupt Address.
    DMA             ** CD-ROM selected DMA Channel.
    CHANGE OPTIONS  Brings up CD-ROM configuration menu.       

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.