removdrv.txt Driver File Contents (iaa35r.zip)

************************************************************
************************************************************
To manually remove all Intel(R) Application Accelerator RAID
Edition software from your system, print these instructions
and then complete the following steps:
 
WARNING: If booting to a RAID 0 volume, all the data 
on the RAID-controlled hard drive(s) will be DELETED and 
will not be accessible. Please backup all important data 
before proceeding. You will need to re-install the operating 
system after completing the steps below. 

Note: If booting to a RAID 1 volume, your system should 
boot (to a single Serial ATA drive) after completing the 
steps below.
 
1. Reboot the system.
2. Depending on your system configuration, complete the 
   appropriate steps.
    
   If your system has the Intel(R) RAID Option ROM 
   installed:

   2a. Enter the Intel RAID Option ROM Setup by pressing
       the 'Ctrl' and 'i' (CTRL + I) keys at the 
       appropriate time during boot-up.
   2b. Once you have entered the Intel RAID Option ROM 
       Setup, select menu option #2 to ‘Delete Volume’,
       ‘Del’ to select the volume, and ‘Y’ to confirm.
   2c. Exit the Option ROM Setup.
   2d. Enter the system BIOS Setup (usually done by 
       pressing a key such as 'F2' or 'Delete' during 
       boot-up).
   2e. Change the IDE configuration for the RAID-controlled
       hard drive(s) from 'RAID' to 'IDE'.

   If your system does not have the Intel RAID Option ROM 
   installed:

   2f. Enter the system BIOS Setup (usually done by 
       pressing a key such as 'F2' or 'Delete' during 
       boot-up).
   2g. Change the IDE configuration for the RAID-controlled
       hard drive(s) from 'RAID' to 'IDE'.

Note: If you experience any difficulties making these 
changes to the system BIOS, please contact your motherboard 
manufacturer or place of purchase for assistance.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.59