README.TXT Driver File Contents (356876.exe)
Driver Package File Name: 356876.exe
Printronix P5000 SBCS WINDOWS 2000 DRIVER V5.0
P5000 SBCS Windows NT Driver refers to as P5000 Thai LP+
Place the driver disk in the drive A of your Windows2000 System. From the
Start->Settings->Printers menu, double click on the "Add Printer" icon and
follow the "Add Printer Wizard" instructions until completed.
During installation, you will be required to select one printer model from
"Add Printer Wizard":
"Printronix P5000 Thai(P-Series)" and
"Printronix P5000 Thai(LQ)"
If you have set the printer protocol to "P-Series", then you should choose
"Printronix P5000 Thai(P-Series)";
If you have set the printer protocol to "LQ", then you should choose
"Printronix P5000 Thai(LQ)";
Printronix P5000 Thai Printer Protocol is set to "P-Series" by default
A) If the installation does not finish successfully and Windows complains
that the driver can not be installed because it couldn't be loaded, or
the driver is busy being used by other application. close all the
applications, login as administrator, then, reinstall the printer driver.
B) Some Printer Driver Properties, such as Graphics Resolutions, you may
make change of the settings through "Advanced" property sheet or through
eg. Microsoft Word:
Select the Menu "File" -> "Print..." -> "Properties", then you may change
the graphics resolution. Upon finishing, click "close", make the changes
C) The page parameters such as paper size, orientation also should be set
properly from within your Windows application(i.e. MS Word's page setup,
etc...) before you print the documents
D) If the printer does not work properly, check the printer front panel and the
driver you are using. They should be the same protocol.
If the printer protocol is set to "P-Series", then use the driver for
"Printronix P5000 Thai(P-series)"; If the printer protocol is set to "LQ",
then use the driver for "Printronix P5000 Thai(LQ)".