1. 366014.exe Driver
2. readme.txt File Contents

readme.txt Driver File Contents (366014.exe)

                                      README.TXT

                         Printronix P7000 Windows 2000 Printer Driver                       


                Version: 2.01B         
		Requires Printer firmware version (or higher):
			PGL/VGL		3.10C
			CT/PGL/VGL	3.10B
			ANSI/PGL	3.10B


Installation:

	1) Click on the Start button, select Settings and open the Printers
	   folder.
     	2) Delete previous version of the driver(if installed).
     	3) Double click on the Add Printer icon and follow the Add Printer 
	   Wizard instructions.

De-install:

	1) Delete the driver from the printers folder
	2) Delete the driver from "Server Properties" (under "File" menu) 
	   selection within Printer Folder


Application Information: 

  (General)

1)	If the file to be printed contains lines,boxes, or overlapping 
	graphics,and the printout does not match the screen, set 
	"Print Optimization"to "disabled".  This may cause slower performance,
	but the printout will match the screen. The Print Optimization feature
	appears under the "Advanced" button within the driver.  

2)	With Custom Barcode Fonts, human readable will not print if point 
	size of 40 is selected.  Select another point size.


3)	If printouts do not match the screen, try selecting higher
	resolutions. Utilizing "BEST" resolution in general will
	produce highest quality printouts.

  (MS-Word)

1)	When utilizing custom barcode fonts, or resident fonts, the "Use 
	Printer Metrics to lay out document" feature must be selected.  
	This is found under Tools/Options/Compatibility within MS Word

2)	When utilizing the custom barcode font or resident fonts, after 
	entering the barcode data, highlight the character position 
	immediately following the barcode data, then select a non-barcode font 
	(such as Arial).  If this is not done, a barcode error will appear on 
	the printout in addition to the barcode.

3)	When utilizing MS-Word 2000, text within shaded boxes does not print 
	due to a problem within Word regarding how boxes with different x and y 
	resolutions are handled.


  (MS-Excel)

1)  	When utilizing the custom barcode font feature, all cells must be
	formatted as "text"

2)	When printing, be sure that the print area is selected appropriately,
	 otherwise extraneous data may be found and incorrectly printed

  (MS-PowerPoint)

1)	With PowerPoint 97, the size of the printed text may not match the 
	screen in STD, HIGH, and FAST resolutions.  Selecting "BEST" resolution 
	will result in correct printouts.  PowerPoint 2000 does not exhibit these
	problems.

  (Lotus 1-2-3)

1)	Custom barcode fonts cannot be used with this application at this time.

  (MS-WordPad)

1) 	Custom and Resident Barcode Fonts cannot be used with this application
	at this time.

Custom and Resident Barcode Fonts:
If these fonts do not display or if they print as plain text, the following fonts( distributed along with 
the driver) may need to be manually installed/re-installed:
   qsbrfnt1.fon
   qsbrfnt2.fon
   qsbrfnt3.fon
   qsbrfnt4.fon
   qsbrfnt5.fon
   qsbrfnt6.fon

To install fonts:
- click on the Start button, select Control Panel, then the Fonts folder
- click on File, then Install New Font... to launch the Add Fonts wizard
- select the location where the font files are located, the font files should be
  automatically recognized and displayed by the wizard
  (Note: if you are creating a printer connection as a network printer, the barcode font files may not
   be present locally -obtain them from your administrator) 
- click Select All, then OK to install


Use of Drivers with Microsoft Word

In order for resident barcodes to display properly on the screen, you must do the following:
a) Under MS Word "Tools/Options/Compatibility" menu, check the box titled "Use Printer Metrics to Layout Document"
b) When selecting the resident barcode font within MS Word, select 48 point size