oemsetup.inf Driver File Contents (viaRhineFamilyFastEthernetv207.zip)

;
;  Purpose:   Netcard setup information file for Windows NT 3.51 / NT 4.0
;
;  Author:    Tevin Chen
;
;  Date:      Feb, 2002
;

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCI
[Options]
    FET

[PropertiesFET]
    Property_1 = "ConnectionType", +
                 "Connection Type", +
                 "0,1,2,3,4", +
                 "Auto-Negotiation,100BaseTx Half Duplex,100BaseTx Full Duplex,10BaseT   Half Duplex,10BaseT   Full Duplex", +
                 "enum"
    Property_2 = "ValidatePacketLen", +
                 "Validate Packet Length", +
                 "0,1", +
                 "Disabled,Enabled", +
                 "enum"
    Property_3 = "NetworkAddress", +
                 "Network Address", +
                 "", +
                 "", +
                 "edit"
    Property_4 = "TransmitBuffers", +
                 "Transmit Buffers", +
                 "48,128", +
                 "", +
                 "int"
    Property_5 = "ReceiveBuffers", +
                 "Receive Buffers", +
                 "64,128", +
                 "", +
                 "int"

[PropertiesFlowCtrl]
    Property_6 = "FlowCtrl", +
                 "Flow Control", +
                 "0,1,2", +
                 "Hardware Default,Disabled,Enabled", +
                 "enum"

[PropertiesTagging]
    Property_7 = "8021pqtag", +
                 "802.1p/Q Tagging", +
                 "0,1", +
                 "Disabled,Enabled", +
                 "enum"

[PropertiesVLAN]
    Property_8 = "VLANID", +
                 "VLAN ID", +
                 "0,4094", +
                 "", +
                 "int"

;============================================================================

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "VIA Technologies, Inc."

; Driver Version info
; VERSION.... 3.03
ProductMajorVersion     = "3"
ProductMinorVersion     = "03"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

; DEVICE_ID....
; (0x1106 == 4358)
VendorID = 4358

ProductSoftwareName     = "FETNDIS"
ProductSoftwareTitle    = "VIA Rhine Family Fast Ethernet Adapter Driver"
NT4Driver = "fetnd4.sys"
NT351Driver = "fetnd3.sys"
ProductSoftwareImagePathNT4 = "\SystemRoot\System32\drivers\"$(NT4Driver)
ProductSoftwareImagePathNT351 = "\SystemRoot\System32\drivers\"$(NT351Driver)
NetRuleSoftwareType     = "FETSys ndisDriver FETDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """FETSys"" yes no container"
NetRuleSoftwareClass    = {"FETDriver basic"}
NetRuleSoftwareSWBindable = {"FETDriver FETAdapter non exclusive 100"}

HelpFileName = "fetndh.hlp"
ProductHardwareName = "FETNDIS"

ProductHardwareFETVT3106STitle = "VIA VT6105M Rhine III Management Adapter"
ProductHardwareFETVT3106JTitle = "VIA VT6105 Rhine III Fast Ethernet Adapter"
ProductHardwareFETVT3065Title = "VIA VT6102 Rhine II Fast Ethernet Adapter"
ProductHardwareFETVT3043Title = "VIA VT86C100A Rhine I Fast Ethernet Adapter"
ProductHardwareFETDescription = "VIA Rhine Family Fast Ethernet Adapter"

NetRuleHardwareFETType  = "FET FETAdapter"
NetRuleHardwareFETClass = {"FETAdapter basic"}
AdapterFETType = 5   ;; PCI board
HelpFETId = 30
; DEVICE_ID....
; VT3043 (0x30431106 == 809701638)
VT3043CFID = 809701638

; VT3065 (0x30651106 == 811929862)
VT3065CFID = 811929862

; VT3106S (0x30531106 == 810750214)
VT3106SCFID = 810750214

; VT3106J (0x31061106 == 822481158)
VT3106JCFID = 822481158

; SubID....
; VT3106S (0x01061106 == 17174790 )
;VT3106SSubID = 17174790

; VT3106J (0x01051106 == 17109254 )
;VT3106JSubID = 17109254

; VT3065 (0x01021106 == 16912646)
;VT3065SubID = 16912646

; VT3043 (0x01001106 == 16781574)
;VT3043SubID = 16781574

NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

VT3106SDefaultParamList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                             {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                             {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),64},+
                             {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                             {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                             {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
                             {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),32},+
                             {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
                             {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
                             {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+
                             {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
                             {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),0},+
                             {NwayForce,$(NoTitle),$(!REG_VT_DWORD),1},+
                             {FlowCtrl,&(NoTitle),$(!REG_VT_DWORD),0},+
                             {8021pqtag,$(NoTitle),$(!REG_VT_DWORD),0},+
                             {VLANID,$(NoTitle),$(!REG_VT_DWORD),0}}
                                
VT3106JDefaultParamList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                            {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                            {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),64},+
                            {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),32},+
                            {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
                            {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {NwayForce,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {FlowCtrl,&(NoTitle),$(!REG_VT_DWORD),0}}

VT3065DefaultParamList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                            {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                            {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),64},+
                            {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),32},+
                            {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
                            {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {NwayForce,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {FlowCtrl,&(NoTitle),$(!REG_VT_DWORD),0}}

VT3043DefaultParamList = {{ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
                            {TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),8},+
                            {ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),64},+
                            {ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),8},+
                            {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
                            {ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),1},+
                            {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
                            {ConnectionType, $(NoTitle),$(!REG_VT_DWORD),0}}
;============================================================================
[GeneralConstants]
Sub = ""
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle         = 0
ExitState       = "Active"
OldVersionExisted   = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

NT351Version = "3.51"
NT40Version = "4.0"

;============================================================================
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
;============================================================================
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
;============================================================================
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    ifstr(i) $($1) == ""
       goto returnoptions
    endif
    set PlatformList = ^(PlatformsSupported, 1)
    Ifcontains(i) $($1) in $(PlatformList)
       goto returnoptions
    else
       set Status = STATUS_NOTSUPPORTED
       goto finish_ReturnOptions
    endif
    else
    set Status = STATUS_NOLANGUAGE
    goto finish_ReturnOptions
    endif
;----------------------------------------------------------------------------
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
;----------------------------------------------------------------------------
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
;============================================================================
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
    Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
    set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
;----------------------------------------------------------------------------
Begin = +
    ; Get the version of NT from registry (for NT3.51/NT4.0)
    set CurrentVersionValue = ""
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyNt
    ifstr(i) $(KeyNt) != ""
        GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
        CloseRegKey $(KeyNt)
    endif

    set TargetVersion = *($(CurrentVersionValue),4)
    set TargetOS = ""
    ifstr $(TargetVersion) == $(NT351Version)
        set TargetOS = "NT351"
    else-ifstr $(TargetVersion) == $(NT40Version)
        set TargetOS = "NT4"
    else
        set Error = "This driver does not support Windows NT version "*($(CurrentVersionValue),4)" !"
        goto fatal
    endif

    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    Else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    Else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    Else-Ifstr(i) $(!NTN_InstallMode) == configure
        Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            Endif
            set Error = $($R0)
            set from = end
            set to = end
            goto nonfatalinfo
        Else
            set StartLabel = configureadapter
        Endif
    Else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    Endif

    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
;----------------------------------------------------------------------------
installadapter = +
    install "Install-UTIL"

    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
            Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), $(ProductVersion)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            goto end
        Else
            Shell $(UtilityInf), CardExistedDlg
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            ifstr(i) $($R1) != "OK"
                set CommonStatus = STATUS_USERCANCEL
                goto end
            endif
            set OldVersionExisted = $(TRUE)
        Endif
    Endif

    ifstr(i) $(DoCopy) == "YES"
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set Error = $($R0)
            Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
            Goto successful
        Endif
        
        Set SrcDir = $($R1)
        ; HELP....
        ;install "Install-Hlp"
    endif
    Goto installproduct
;----------------------------------------------------------------------------
configureadapter = +
    Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Goto fatalregistry
        Endif
    Endif

    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Endif

    Ifstr(i) $($R0) != NO_ERROR
        Goto fatalregistry
    endif

    set KeyParameters = $($R2)
    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif

    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList

    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        ifstr(i) $(ValueName) == "AdapterCFID"
            set AdapterCFID = $(ValueData)
        endif
        ifstr(i) $(ValueName) == "BusNumber"
            set BusNumber = $(ValueData)
        endif
        ifstr(i) $(ValueName) == "SlotNumber"
            set SlotNumber = $(ValueData)
        endif
    EndForListDo

    ifint $(AdapterCFID) != $(VT3043CFID)
        set PropertyKeyList = >($(PropertyKeyList), *($(FlowCtrlPropertyKey), 1))
        set PropertyList    = >($(PropertyList), *($(FlowCtrlProperty), 1))
        set ComboValueList  = >($(ComboValueList), *($(FlowCtrlComboValue), 1))
        set KeyValueList    = >($(KeyValueList), *($(FlowCtrlKeyValue), 1))
        set ValueTypeList   = >($(ValueTypeList), *($(FlowCtrlValueType), 1))
        
        ifint $(AdapterCFID) == $(VT3106SCFID)
            set PropertyKeyList = >($(PropertyKeyList), *($(TaggingPropertyKey), 1))
            set PropertyList    = >($(PropertyList), *($(TaggingProperty), 1))
            set ComboValueList  = >($(ComboValueList), *($(TaggingComboValue), 1))
            set KeyValueList    = >($(KeyValueList), *($(TaggingKeyValue), 1))
            set ValueTypeList   = >($(ValueTypeList), *($(TaggingValueType), 1))

            set PropertyKeyList = >($(PropertyKeyList), *($(VLANPropertyKey), 1))
            set PropertyList    = >($(PropertyList), *($(VLANProperty), 1))
            set ComboValueList  = >($(ComboValueList), *($(VLANComboValue), 1))
            set KeyValueList    = >($(KeyValueList), *($(VLANKeyValue), 1))
            set ValueTypeList   = >($(ValueTypeList), *($(VLANValueType), 1))
        endif
    endif
    
    set CurrKeyValueList = {}
    ForListDo $(PropertyKeyList)
        set KeyName = $($)

        ForListDo $(ValueList)
            set ValueName = *($($), 1)
            set ValueData = *($($), 4)
            ifstr $(ValueName) == $(KeyName)
                set CurrKeyValueList = >($(CurrKeyValueList), $(ValueData))
                ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) WARNING $(CurrKeyValueList)
            endif
        EndForListDo
    EndForListDo

;----------------------------------------------------------------------------
adapteroptions = +
    set from = adapteroptions

    LoadLibrary "" $(!STF_WINDOWSSYSPATH)"\ntutil.dll" PropHandle
    LibraryProcedure SetResult, $(PropHandle), ShowProp, $(PropertyList), +
                                                         $(CurrKeyValueList), +
                                                         $(KeyValueList), +
                                                         $(ComboValueList), +
                                                         $(ValueTypeList), +
                                                         $(HelpFileName)
    FreeLibrary $(PropHandle)

    ifstr $(SetResult) == "PROPERTY_UI_USER_CANCEL"
        set CommonStatus = STATUS_USERCANCEL
        goto end
    endif
    ifstr $(SetResult) == $(CurrKeyValueList)
        set CommonStatus = STATUS_USERCANCEL
        goto end
    endif

    ifstr(i) $(!NTN_InstallMode) == configure
        goto updateparameters
    endif

;----------------------------------------------------------------------------
installproduct =+
    StartWait
    ; DEVICE_ID....
    ; 65535

    ; search device ID for 3043/3065/3106J/3106S
    set AdapterList65 = {}
    set AdapterList43 = {}
    set AdapterList106J = {}
    set AdapterList106S = {}
    set NoAdapter = $(TRUE)

    ; find 3043 adapters
    set-div DeviceID = $(VT3043CFID) 65535
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
         goto ShellCodeError
    endif

    ifstr(i) $($R0) != {}
        set AdapterList43 = $($R0)
        set NoAdapter = $(FALSE)
    endif

    ; find 3065 adapters
    LoadLibrary "" $(!STF_WINDOWSSYSPATH)"\ntutil.dll" LibHandle

    set-div DeviceID = $(VT3065CFID) 65535
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif    
    
    ;ifstr(i) $($R0) != {}
    ;    ForListDo $($R0)
    ;        set BusNum =      *($($),1)
    ;        set DeviceNum =   *($($),2)
    ;        set FunctionNum = *($($),3)

    ;        LibraryProcedure Result, $(LibHandle), GetSubID, $(BusNum), $(DeviceNum), $(FunctionNum)

    ;        ifint $(Result) == $(VT3065SubID)
    ;            set AdapterList65 = >($(AdapterList65), $($))
    ;        endif
    ;    EndForListDo
    ;endif
            
    ifstr(i) $($R0) != {}
        set AdapterList65 = $($R0)
        set NoAdapter = $(FALSE)
    endif

    ; find 3106J adapters
    set-div DeviceID = $(VT3106JCFID) 65535
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    ;ifstr(i) $($R0) != {}
    ;    ForListDo $($R0)
    ;        set BusNum =      *($($),1)
    ;        set DeviceNum =   *($($),2)
    ;        set FunctionNum = *($($),3)

    ;        LibraryProcedure Result, $(LibHandle), GetSubID, $(BusNum), $(DeviceNum), $(FunctionNum)

    ;        ifint $(Result) == $(VT3106JSubID)
    ;            set AdapterList106J = >($(AdapterList106J), $($))
    ;        endif
    ;    EndForListDo
    ;endif
        
    ifstr(i) $($R0) != {}
        set AdapterList106J = $($R0)
        set NoAdapter = $(FALSE)
    endif
    
    ; find 3106S adapters
    set-div DeviceID = $(VT3106SCFID) 65535
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    ;ifstr(i) $($R0) != {}
    ;    ForListDo $($R0)
    ;        set BusNum =      *($($),1)
    ;        set DeviceNum =   *($($),2)
    ;        set FunctionNum = *($($),3)

    ;        LibraryProcedure Result, $(LibHandle), GetSubID, $(BusNum), $(DeviceNum), $(FunctionNum)

    ;        ifint $(Result) == $(VT3106SSubID)
    ;            set AdapterList106S = >($(AdapterList106S), $($))
    ;        endif
    ;    EndForListDo
    ;endif
    
    ifstr(i) $($R0) != {}
        set AdapterList106S = $($R0)
        set NoAdapter = $(FALSE)
    endif
   
    FreeLibrary $(LibHandle)

    ; no adapters was found
    ifint $(NoAdapter) == $(TRUE)
        set Error = $(CANNOT_FIND_ANY_CARD)
        set CommonStatus = USER_CANCEL
        set from = end
        goto nonfatal
    endif
    
    Ifstr(i) $(DoCopy) == "YES"
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set Error = $($R0)
            Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
            Goto successful
        Endif
        Set SrcDir = $($R1)
    Endif
    ; install help file. In attended mode, system will execute the installation from
    ; "installproduct" , so, I add another install help here (AJ 3/25/1999)
    install "Install-Hlp"

    install "Install-Option"

    ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
        Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
        goto fatal
    endif

    ; Chinghua- setting default values if user re-install the driver

    ifint $(OldVersionExisted) == $(TRUE)
        ; setting default value for 3106S
        ForListDo $(AdapterList106S)

            set BusNum = *($($),1)
            set DeviceNum = *($($),2)
            ;set Sub = "VT3106S"
            set Description = $(ProductHardwareFETDescription)
            set Product = $(ProductHardwareName)

            OpenRegKey $(!REG_H_LOCAL) "" +
                       "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards" +
                       $(!REG_KEY_READ) IE_KeyNetcards

            EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
            ForListDo $(IE_KeyNameList)
                set IE_KeyName = *($($),1)
                OpenRegKey $(IE_KeyNetcards) "" +
                           $(IE_KeyName) $(!REG_KEY_READ) IE_Card
                ifstr $(IE_Card) == $(KeyNull)
                endif
                GetRegValue $(IE_Card),"Description", DescriptionInfo
                GetRegValue $(IE_Card),"ProductName", ProductNameInfo
                set CardDescription = *($(DescriptionInfo), 4)
                set CardProductName = *($(ProductNameInfo), 4)
                ifstr(i) $(CardDescription) == $(Description)
                    ifstr(i) $(CardProductName) == $(Product)
                         GetRegValue $(IE_Card), "ServiceName", ServiceNameInfo
                         set ServiceName = *($(ServiceNameInfo), 4)
                         OpenRegKey $(!REG_H_LOCAL) "" +
                                    $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" +
                                    $(!REG_KEY_READWRITE) IE_KeyService
                         ifstr $(IE_KeyService) == $(KeyNull)
                         endif
                         GetRegValue $(IE_KeyService), "BusNumber", BusInfo
                         GetRegValue $(IE_KeyService), "SlotNumber", SlotInfo
                         set CardBusNum = *($(BusInfo), 4)
                         set CardSlotNum = *($(SlotInfo), 4)
                         ifint $(CardBusNum) == $(BusNum)
                             ifint $(CardSlotNum) == $(DeviceNum)
                                set NewValueList = $(VT3106SDefaultParamList)
                                set ParamPath = $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters"
                                OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
                                Shell  $(UtilityInf), AddValueList, $(KeyParam), $(NewValueList)
                                CloseRegKey $(KeyParam)
                             endif
                         endif
                         CloseRegKey $(IE_KeyService)
                    endif
                endif
                CloseRegKey $(IE_Card)
            EndForListDo
            CloseRegKey $(IE_KeyNetcards)
        EndForListDo
        
        ; setting default value for 3106J
        ForListDo $(AdapterList106J)

            set BusNum = *($($),1)
            set DeviceNum = *($($),2)
            ;set Sub = "VT3106J"
            set Description = $(ProductHardwareFETDescription)
            set Product = $(ProductHardwareName)

            OpenRegKey $(!REG_H_LOCAL) "" +
                       "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards" +
                       $(!REG_KEY_READ) IE_KeyNetcards

            EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
            ForListDo $(IE_KeyNameList)
                set IE_KeyName = *($($),1)
                OpenRegKey $(IE_KeyNetcards) "" +
                           $(IE_KeyName) $(!REG_KEY_READ) IE_Card
                ifstr $(IE_Card) == $(KeyNull)
                endif
                GetRegValue $(IE_Card),"Description", DescriptionInfo
                GetRegValue $(IE_Card),"ProductName", ProductNameInfo
                set CardDescription = *($(DescriptionInfo), 4)
                set CardProductName = *($(ProductNameInfo), 4)
                ifstr(i) $(CardDescription) == $(Description)
                    ifstr(i) $(CardProductName) == $(Product)
                         GetRegValue $(IE_Card), "ServiceName", ServiceNameInfo
                         set ServiceName = *($(ServiceNameInfo), 4)
                         OpenRegKey $(!REG_H_LOCAL) "" +
                                    $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" +
                                    $(!REG_KEY_READWRITE) IE_KeyService
                         ifstr $(IE_KeyService) == $(KeyNull)
                         endif
                         GetRegValue $(IE_KeyService), "BusNumber", BusInfo
                         GetRegValue $(IE_KeyService), "SlotNumber", SlotInfo
                         set CardBusNum = *($(BusInfo), 4)
                         set CardSlotNum = *($(SlotInfo), 4)
                         ifint $(CardBusNum) == $(BusNum)
                             ifint $(CardSlotNum) == $(DeviceNum)
                                set NewValueList = $(VT3106JDefaultParamList)
                                set ParamPath = $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters"
                                OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
                                Shell  $(UtilityInf), AddValueList, $(KeyParam), $(NewValueList)
                                CloseRegKey $(KeyParam)
                             endif
                         endif
                         CloseRegKey $(IE_KeyService)
                    endif
                endif
                CloseRegKey $(IE_Card)
            EndForListDo
            CloseRegKey $(IE_KeyNetcards)
        EndForListDo

        ; setting default value for 3065
        ForListDo $(AdapterList65)

            set BusNum = *($($),1)
            set DeviceNum = *($($),2)
            ;set Sub = "VT3065"
            set Description = $(ProductHardwareFETDescription)
            set Product = $(ProductHardwareName)

            OpenRegKey $(!REG_H_LOCAL) "" +
                       "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards" +
                       $(!REG_KEY_READ) IE_KeyNetcards

            EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
            ForListDo $(IE_KeyNameList)
                set IE_KeyName = *($($),1)
                OpenRegKey $(IE_KeyNetcards) "" +
                           $(IE_KeyName) $(!REG_KEY_READ) IE_Card
                ifstr $(IE_Card) == $(KeyNull)
                endif
                GetRegValue $(IE_Card),"Description", DescriptionInfo
                GetRegValue $(IE_Card),"ProductName", ProductNameInfo
                set CardDescription = *($(DescriptionInfo), 4)
                set CardProductName = *($(ProductNameInfo), 4)
                ifstr(i) $(CardDescription) == $(Description)
                    ifstr(i) $(CardProductName) == $(Product)
                         GetRegValue $(IE_Card), "ServiceName", ServiceNameInfo
                         set ServiceName = *($(ServiceNameInfo), 4)
                         OpenRegKey $(!REG_H_LOCAL) "" +
                                    $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" +
                                    $(!REG_KEY_READWRITE) IE_KeyService
                         ifstr $(IE_KeyService) == $(KeyNull)
                         endif
                         GetRegValue $(IE_KeyService), "BusNumber", BusInfo
                         GetRegValue $(IE_KeyService), "SlotNumber", SlotInfo
                         set CardBusNum = *($(BusInfo), 4)
                         set CardSlotNum = *($(SlotInfo), 4)
                         ifint $(CardBusNum) == $(BusNum)
                             ifint $(CardSlotNum) == $(DeviceNum)
                                set NewValueList = $(VT3065DefaultParamList)
                                set ParamPath = $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters"
                                OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
                                Shell  $(UtilityInf), AddValueList, $(KeyParam), $(NewValueList)
                                CloseRegKey $(KeyParam)
                             endif
                         endif
                         CloseRegKey $(IE_KeyService)
                    endif
                endif
                CloseRegKey $(IE_Card)
            EndForListDo
            CloseRegKey $(IE_KeyNetcards)
        EndForListDo

        ; setting default value for 3043
        ForListDo $(AdapterList43)

            set BusNum = *($($),1)
            set DeviceNum = *($($),2)
            ;set Sub = "VT3043"
            set Description = $(ProductHardwareFETDescription)
            set Product = $(ProductHardwareName)

            OpenRegKey $(!REG_H_LOCAL) "" +
                       "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards" +
                       $(!REG_KEY_READ) IE_KeyNetcards

            EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
            ForListDo $(IE_KeyNameList)
                set IE_KeyName = *($($),1)
                OpenRegKey $(IE_KeyNetcards) "" +
                           $(IE_KeyName) $(!REG_KEY_READ) IE_Card
                ifstr $(IE_Card) == $(KeyNull)
                endif
                GetRegValue $(IE_Card),"Description", DescriptionInfo
                GetRegValue $(IE_Card),"ProductName", ProductNameInfo
                set CardDescription = *($(DescriptionInfo), 4)
                set CardProductName = *($(ProductNameInfo), 4)
                ifstr(i) $(CardDescription) == $(Description)
                    ifstr(i) $(CardProductName) == $(Product)
                         GetRegValue $(IE_Card), "ServiceName", ServiceNameInfo
                         set ServiceName = *($(ServiceNameInfo), 4)
                         OpenRegKey $(!REG_H_LOCAL) "" +
                                    $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" +
                                    $(!REG_KEY_READWRITE) IE_KeyService
                         ifstr $(IE_KeyService) == $(KeyNull)
                         endif
                         GetRegValue $(IE_KeyService), "BusNumber", BusInfo
                         GetRegValue $(IE_KeyService), "SlotNumber", SlotInfo
                         set CardBusNum = *($(BusInfo), 4)
                         set CardSlotNum = *($(SlotInfo), 4)
                         ifint $(CardBusNum) == $(BusNum)
                             ifint $(CardSlotNum) == $(DeviceNum)
                                set NewValueList = $(VT3043DefaultParamList)
                                set ParamPath = $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters"
                                OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
                                Shell  $(UtilityInf), AddValueList, $(KeyParam), $(NewValueList)
                                CloseRegKey $(KeyParam)
                             endif
                         endif
                         CloseRegKey $(IE_KeyService)
                    endif
                endif
                CloseRegKey $(IE_Card)
            EndForListDo
            CloseRegKey $(IE_KeyNetcards)
        EndForListDo

    endif
    ; end of setting default values

    ifint $(OldVersionExisted) == $(FALSE)

        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
                                                    $(ProductSoftwareName), +
                                                    $(ProductSoftwareName), +
                                                    $(ProductSoftwareTitle), +
                                                    $(STF_CONTEXTINFNAME), +
                                                    $(ProductSoftwareImagePath$(TargetOS)), +
                                                    "kernel", +
                                                    "NDIS", +
                                                    {}, +
                                                    "", +
                                                    $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif

        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                    {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                    {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                    {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif

        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif

    endif

;----------------------------------------------------------------------------
    ifstr(i) $(AdapterList106S) == {}
        goto InstallAdapter106J
    endif

    ForListDo $(AdapterList106S)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)

        set Sub = "VT3106S"

        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                                                        $(DeviceNum), +
                                                        $(ProductHardware$(Option)$(Sub)Title), +
                                                        $(ProductHardwareName), +
                                                        "YES"

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif

        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName), +
                                                       $(STF_CONTEXTINFNAME), +
                                                       $(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif
            ;read-syms FileDependentDlg$(!STF_LANGUAGE)
            ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)

            ; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
            ifstr $(!STF_GUI_UNATTENDED) != "YES"
                ;ui start "InputDlg"
                ;ifstr(i) $(DLGEVENT) == "CONTINUE"
                ;    set ConnectionIndex = $(Combo1Out)
                ui pop 1
                ;else-ifstr(i) $(DLGEVENT) == "BACK"
                ;    set CommonStatus = STATUS_USERCANCEL
                ;    ui pop 1
                ;    goto end
                ;else
                ;    ui pop 1
                ;    goto end
                ;endif
            endif

            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3106SCFID)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            ; for 3106S registery
            set NewValueList = $(VT3106SDefaultParamList)
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
        endif

        set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
        set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        CloseRegKey $(HardNetCardKey)
        CloseRegKey $(HardNetRuleKey)
        set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                            {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                            {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
        CloseRegKey $(HardParameterKey)

    EndForListDo

;----------------------------------------------------------------------------
InstallAdapter106J =+

    ifstr(i) $(AdapterList106J) == {}
        goto InstallAdapter65
    endif

    ForListDo $(AdapterList106J)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)

        set Sub = "VT3106J"

        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                                                        $(DeviceNum), +
                                                        $(ProductHardware$(Option)$(Sub)Title), +
                                                        $(ProductHardwareName), +
                                                        "YES"

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif

        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName), +
                                                       $(STF_CONTEXTINFNAME), +
                                                       $(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif
            ;read-syms FileDependentDlg$(!STF_LANGUAGE)
            ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)

            ; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
            ifstr $(!STF_GUI_UNATTENDED) != "YES"
                ;ui start "InputDlg"
                ;ifstr(i) $(DLGEVENT) == "CONTINUE"
                ;    set ConnectionIndex = $(Combo1Out)
                ui pop 1
                ;else-ifstr(i) $(DLGEVENT) == "BACK"
                ;    set CommonStatus = STATUS_USERCANCEL
                ;    ui pop 1
                ;    goto end
                ;else
                ;    ui pop 1
                ;    goto end
                ;endif
            endif

            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3106JCFID)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            ; for 3106J registery
            set NewValueList = $(VT3106JDefaultParamList)
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
        endif

        set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
        set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        CloseRegKey $(HardNetCardKey)
        CloseRegKey $(HardNetRuleKey)
        set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                            {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                            {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
        CloseRegKey $(HardParameterKey)

    EndForListDo

;----------------------------------------------------------------------------
InstallAdapter65 =+

    ifstr(i) $(AdapterList65) == {}
        goto InstallAdapter43
    endif

    ForListDo $(AdapterList65)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)

        set Sub = "VT3065"

        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                                                        $(DeviceNum), +
                                                        $(ProductHardware$(Option)$(Sub)Title), +
                                                        $(ProductHardwareName), +
                                                        "YES"

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif

        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName), +
                                                       $(STF_CONTEXTINFNAME), +
                                                       $(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif
            ;read-syms FileDependentDlg$(!STF_LANGUAGE)
            ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)

            ; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
            ifstr $(!STF_GUI_UNATTENDED) != "YES"
                ;ui start "InputDlg"
                ;ifstr(i) $(DLGEVENT) == "CONTINUE"
                ;    set ConnectionIndex = $(Combo1Out)
                ui pop 1
                ;else-ifstr(i) $(DLGEVENT) == "BACK"
                ;    set CommonStatus = STATUS_USERCANCEL
                ;    ui pop 1
                ;    goto end
                ;else
                ;    ui pop 1
                ;    goto end
                ;endif
            endif

            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3065CFID)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            ; for 3065 registery
            set NewValueList = $(VT3065DefaultParamList)
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
        endif

        set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
        set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        CloseRegKey $(HardNetCardKey)
        CloseRegKey $(HardNetRuleKey)
        set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                            {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                            {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
        CloseRegKey $(HardParameterKey)

    EndForListDo

    ;FreeLibrary $(LibHandle)

    ;ifstr(i) $(AdapterList43) == {}
    ;        goto InstallAdapterOK
    ;endif

;----------------------------------------------------------------------------
InstallAdapter43 =+

    ForListDo $(AdapterList43)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)

        set Sub = "VT3043"

        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                                                        $(DeviceNum), +
                                                        $(ProductHardware$(Option)$(Sub)Title), +
                                                        $(ProductHardwareName), +
                                                        "YES"

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif

        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif

        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif
            ;read-syms FileDependentDlg$(!STF_LANGUAGE)
            ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)

            ; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
            ifstr $(!STF_GUI_UNATTENDED) != "YES"
                ;ui start "InputDlg"
                ;ifstr(i) $(DLGEVENT) == "CONTINUE"
                    ;    set ConnectionIndex = $(Combo1Out)
                    ui pop 1
                ;else-ifstr(i) $(DLGEVENT) == "BACK"
                    ;    set CommonStatus = STATUS_USERCANCEL
                    ;    ui pop 1
                    ;    goto end
                ;else
                    ;    ui pop 1
                    ;    goto end
                ;endif
            endif

            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3043CFID)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            ; for 3043 registery
            set NewValueList = $(VT3043DefaultParamList)
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
        endif

        set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
        set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        CloseRegKey $(HardNetCardKey)
        CloseRegKey $(HardNetRuleKey)
        set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                            {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                            {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
        CloseRegKey $(HardParameterKey)

    EndForListDo

;----------------------------------------------------------------------------
InstallAdapterOK =+
    EndWait
    goto successful
;----------------------------------------------------------------------------
updateparameters =+

    ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) WARNING $(SetResult)
    
    ForListDo $(PropertyKeyList)
        set KeyName = $($)
        set PropIndex = ~($(PropertyKeyList), $(KeyName))

        ifstr *($(SetResult), $(PropIndex)) != *($(CurrKeyValueList), $(PropIndex))
            set NewRegValue = *($(SetResult), $(PropIndex))
            
            ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) WARNING $(NewRegValue)
            
            Ifstr $(KeyName) == "NetworkAddress"
                set NewValueList = {{$(KeyName),$(NoTitle),$(!REG_VT_SZ),$(NewRegValue)}}
            Else
                set NewValueList = {{$(KeyName),$(NoTitle),$(!REG_VT_DWORD),$(NewRegValue)}}
            Endif

            shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
            Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            Endif
        endif
    EndForListDo

    goto successful
;----------------------------------------------------------------------------
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                                                        $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                                                        $(ProductSoftwareName), +
                                                        $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    goto end
;----------------------------------------------------------------------------
UpgradeSoftware = +
        ; initialize driver parameter list
    Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Goto fatalregistry
        Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif

    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList

    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        ifstr(i) $(ValueName) == "AdapterCFID"
            set AdapterCFID = $(ValueData)
        endif
        ifstr(i) $(ValueName) == "BusNumber"
            set BusNumber = $(ValueData)
        endif
        ifstr(i) $(ValueName) == "SlotNumber"
            set SlotNumber = $(ValueData)
        endif
    EndForListDo
       
    Ifint $(AdapterCFID) == $(VT3106SCFID)
        set NewValueList = $(VT3106SDefaultParamList)
    Else-Ifint $(AdapterCFID) == $(VT3106JCFID)
        set NewValueList = $(VT3106JDefaultParamList)
    Else-Ifint $(AdapterCFID) == $(VT3065CFID)
        set NewValueList = $(VT3065DefaultParamList)
    Else
        set NewValueList = $(VT3043DefaultParamList)
    Endif

    shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    Endif

    ; Copy new software
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set !UG_Filename = $($R0)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
     else
        goto fatalregistry
     endif

     goto end
;----------------------------------------------------------------------------
successful = +
    goto end
;----------------------------------------------------------------------------

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
                                                        $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
                                                        $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
;----------------------------------------------------------------------------
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
    goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
    goto $(from)
    else
    goto "end"
    endif
;----------------------------------------------------------------------------
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
;----------------------------------------------------------------------------
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
;----------------------------------------------------------------------------
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif

    ; if in unattended mode, do not show error message
    ifstr $(!STF_GUI_UNATTENDED) != "YES"
        Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        ifstr(i) $($R1) == "OK"
            goto $(from)
        else
            goto "end"
        endif
    else
        goto "end"
    endif
;----------------------------------------------------------------------------
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;----------------------------------------------------------------------------
fatal = +
    ifstr(i) $(Error) == ""
    Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    goto setfailed
;----------------------------------------------------------------------------
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
;----------------------------------------------------------------------------
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
;----------------------------------------------------------------------------
end = +
    Return $(CommonStatus)
;----------------------------------------------------------------------------
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
    AddSectionFilesToCopyList Files-$(Option)-$(TargetOS) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
;----------------------------------------------------------------------------
[Install-Hlp]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	    AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSSYSPATH)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
;----------------------------------------------------------------------------
[Install-Update]
    set STF_VITAL        = ""
    set STF_OVERWRITE    = "VERIFYSOURCEOLDER"

    ; HELP....
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(Option)-$(TargetOS) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    AddSectionFilesToCopyList Files-SubID $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    AddSectionFilesToCopyList Files-PropUI $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSSYSPATH)

    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit
[Install-UTIL]
    set STF_VITAL        = ""
    set STF_OVERWRITE    = "ALWAYS"

    AddSectionFilesToCopyList Files-SubID $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    AddSectionFilesToCopyList Files-PropUI $(SrcDir) $(!STF_WINDOWSSYSPATH)
    CopyFilesInCopyList
    ClearCopyList
    exit
[Source Media Descriptions]
    1  = "VIA Rhine Family Fast Ethernet Adapter Driver"
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
;============================================================================
[Files-Inf]
1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-FET-NT4]
1, fetnd4.sys  , SIZE=999
[Files-FET-NT351]
1, fetnd3.sys  , SIZE=999
[Files-SubID]
1, pcienum.sys , SIZE=999
[Files-PropUI]
1, ntutil.dll  , SIZE=999
[Files-Help]
1, fetndh.hlp  , SIZE=999
;============================================================================
[LanguagesSupported]
    ENG
[OptionsTextENG]
    FET  = "VIA Rhine Family Fast Ethernet Adapter Driver"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
           "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "VIA Rhine Family Fast Ethernet Adapter Driver"
FunctionFETTitle = "VIA Rhine Family Fast Ethernet Adapter Setup"

ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"

; Add for New UI ****************
PropertyKeyList = ^(Properties$(Option), 1)
PropertyList    = ^(Properties$(Option), 2)
KeyValueList    = ^(Properties$(Option), 3)
ComboValueList  = ^(Properties$(Option), 4)
ValueTypeList   = ^(Properties$(Option), 5)

FlowCtrlPropertyKey = ^(PropertiesFlowCtrl, 1)
FlowCtrlProperty    = ^(PropertiesFlowCtrl, 2)
FlowCtrlKeyValue    = ^(PropertiesFlowCtrl, 3)
FlowCtrlComboValue  = ^(PropertiesFlowCtrl, 4)
FlowCtrlValueType   = ^(PropertiesFlowCtrl, 5)

TaggingPropertyKey = ^(PropertiesTagging, 1)
TaggingProperty    = ^(PropertiesTagging, 2)
TaggingKeyValue    = ^(PropertiesTagging, 3)
TaggingComboValue  = ^(PropertiesTagging, 4)
TaggingValueType   = ^(PropertiesTagging, 5)

VLANPropertyKey = ^(PropertiesVLAN, 1)
VLANProperty    = ^(PropertiesVLAN, 2)
VLANKeyValue    = ^(PropertiesVLAN, 3)
VLANComboValue  = ^(PropertiesVLAN, 4)
VLANValueType   = ^(PropertiesVLAN, 5)
; Add End ********************

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.55