README.TXT Driver File Contents (

This document contains installation notes, which is not included in the
10/100 PCMCIA ethernet adapter USER'S GUIDE or onscreen instructions,
for NDIS users regarding 10/100 PCMCIA ethernet adapter installation.

This document contains information on the following topics:

1.0 Introduction
2.0 Installation Notes
3.0 PROTOCOL.INI keywords Available


1.0 Introduction

      The LNAX100 PCMCIA ethernet adapter Installation diskette contains NDIS
      driver programs, which comply with Microsoft's NDIS v2.0.1
      specification, and installation notes for some of the most popular
      operating systems which support NDIS drivers.

2.0 Installation Notes

     NDIS users, please refer to the following.

        File                    Description/Installation Notes
      \README.TXT          Overall installation notes for all users
      \NDIS2\README.TXT    Overall installation notes for all NDIS users
      \NDIS2\PCNFS.TXT     For PCNFS users
      \NDIS2\PATHWORK.TXT  For DEC Pathworks users
      \NDIS2\PATHWAY.TXT   For WIN/TCP Pathway users
      \NDIS2\LANSRV.TXT    For IBM LAN Server users
      \NDIS2\BANYAN.TXT    For Banyan Vines users
      \NDIS2\IBMLAN.TXT    For IBM LAN Support Program and
                           LAN Services users

 3.0   PROTOCOL.INI keywords Available

      This guide lists the available PROTOCOL.INI keywords.

       IOBASE    - This keyword specifies the I/O base address used by
                   the adapter. This value must match the actual address
                   setting on the adapter. If this keyword is not
                   specified, the default value(0x300) will be put into

       INTERRUPT - This keyword specifies the interrupt line used by the
                   adapter. This value must match the actual IRQ setting
                   on the adapter.  If this keyword is not specified, the
                   default value (3) will be put into effect.

       DRIVERNAME- This keyword specifies the driver name for the

       NETADDRESS- This keyword specifies the node address (in hex) used
                   by the adapter. This option is used only to override
                   the node address stored in the adapter. With this
                   keyword specified, the specified address will be used
                   instead of the adapter's actual node address.

       CONNECTIONTYPE - This keyword specifies the connector that used by 
                   the adapter. The default value is NWAY.

                 = NWAY       : Adapter will auto detect the speed mode
                                and duplex mode.

                 = S100       : User forces the media to 100BASE-TX HALF
                                DUPLEX mode.

                 = S10        : User forces the media to 10BASE-T HALF
                                DUPLEX mode.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.57