README.TXT Driver File Contents (LNA-100N.zip)

This document describes the procedure to install the NetWare Client32
driver for 10/100 PCMCIA ethernet adapter installation.

Installation Procedure
======================

 A. Driver Installation Procedures on Clien32 for DOS :
    ---------------------------------------------------
    1. If you have completed installed the Netware Client 32 for DOS, all
       you have to do is to modify STARTNET.BAT.  Please see the  sample
       STARTNET.BAT above. If not, Please follow the next step 2 - step 7.

    2. Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from
       Netware 4.11 CD).  When	the  product  manual  appears,	mark the
       "Netware Client 32 for DOS" item, then press <Enter>.

    3. Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu,
       then press <Enter>.

    4. Insert  LNAX100 Driver Diskette, then specify the driver path
       A: or B:

    5. Select "10/100 PCMCIA Ethernet adapter",
       then press <Enter>.

    6. Following instructions to complete the Client32 for DOS software
       installation.

    7. Reboot your machine.


    Configuring LAN Adapter's Media Type:
    ---------------------------------
	The keyword "NWAY" is provided for LAN adapter to auto detect 
        the speed and the duplex mode.
        For example:
        LOAD C:\NOVELL\CLIENT32\LNAX100.LAN NWAY

	The keyword "S100" is provided for user to force the media to
        100BASE-TX HALF DUPLEX mode.
        For example:
        LOAD C:\NOVELL\CLIENT32\LNAX100.LAN S100

	The keyword "S10" is provided for user to force the media to
        10BASE-T HALF DUPLEX mode.
        For example:
        LOAD C:\NOVELL\CLIENT32\LNAX100.LAN S10

    Installing Multiple LAN Adapters:
    ---------------------------------
	The keyword  "SLOT" is provided for multiple LAN adapters in a
	single server by the driver LNAX100.LAN. So, add "SLOT" in LOAD
	commands. For example:

	C:\NOVELL\CLIENT32\NIOS.EXE
	LOAD LSLC32.NLM
	LOAD CMSM.NLM
	LOAD ETHERTSM.NLM
	LOAD LNAX100 FRAME=Ethernet_802.2 SLOT=1
	LOAD LNAX100 FRAME=Ethernet_802.2 SLOT=2

    Sample Configuration Files:
    ---------------------------
      STARTNET.BAT (Client 32 for DOS will contain):

	  C:\NOVELL\CLIENT32\NIOS.EXE
	  LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
	  LOAD C:\NOVELL\CLIENT32\CMSM.NLM
	  LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
	  LOAD C:\NOVELL\CLIENT32\LNAX100.LAN FRAME=ETHERNET_802.2
	  LOAD C:\NOVELL\CLIENT32\LNAX100.LAN FRAME=Ethernet_802.3
	  LOAD C:\NOVELL\CLIENT32\LNAX100.LAN FRAME=Ethernet_II
	  LOAD C:\NOVELL\CLIENT32\LNAX100.LAN FRAME=Ethernet_SNAP



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.80