=================================================================== Avaya Inc. July 2002 Avaya Wireless Outdoor System Release 4.02 Outdoor Router Software OR Client for Windows 98(SE) and ME =================================================================== This readme.txt covers information that was not yet known or available when the user documentation shipped with this product was written. It includes update information, additional installation instructions, limitations to the current version of the product, and suggestions to solve known issues or problems. TABLE OF CONTENTS. 1. SOFTWARE DESCRIPTION 2. SYSTEM REQUIREMENTS 3. NEW IN THIS RELEASE 4. INSTALLATION NOTES 5. TECHNICAL CONSTRAINTS 6. KNOWN ISSUES ------------------------------------------------------------------- 1. SOFTWARE DESCRIPTION 1.1 About this software This Driver supports the following network interface cards: * Avaya Wireless PC Card (Silver and Gold) * WaveLAN/IEEE Turbo 11 Mb Card * WaveLAN/IEEE Turbo Card (8 Mb) * WaveLAN/IEEE PC Card (2 Mb) 1.2 Files Installed The following files will be installed in the Windows designated directory: WILUC48.DLL WLLUC.CNT WNLUC.HLP WNLUC48.CPL WLLUC48.INF WLLUC48.SYS WULUC48.VXD WCLUC48.EXE ------------------------------------------------------------------- 2. SYSTEM REQUIREMENTS 2.1 Operating System This Driver is for the Microsoft Windows 98, Windows 98 SE and the Windows ME Operating Systems. ------------------------------------------------------------------- 3. NEW IN THIS RELEASE * Now supporting Ruby PC Cards. * Enabled both IEEE 802.11 client mode and Outdoor Router Client mode without re-installing the driver * IEEE 802.11 client mode matches the 7.02 release of the Agere NDIS driver * New release of the PC Driver requires use of new PC Driver license keys. The new license keys are of the form 'SHKG-A105-CA40-42L9-AKDJ'. Notice that the new license key is visibly different from older license keys. - New license key DOES NOT protect the System Access Pass Phrase. - New license key contains the Data Rate throttle embedded inside of it, so the user does not have to enter the Data Rate separately * Added OR Client Frequency Channel Auto-Select functionality for automatically detecting the frequency channel the ISP Base Station is running on. This makes installation and migration to different frequency channels much easier to manage. - For OR Client Frequency Channel Auto-Select to work correctly, the NWID and Frequency Channel numbers MUST match (i.e. Frequency Channel 6 and NWID 6). If the channel number and NWID used by your ISP Base Station are not the same number, then the PC driver WILL NOT correctly establish a connection when Channel Auto-Select is enabled. - For Frequency Channel Auto-Select to work, you MUST run kernel version 3.88 or higher on your ISP Base Station. - The PC Driver will work correctly with all existing ISP Base Stations when Frequency Channel Auto-Select is DISABLED. * Solved a bug where the OR Client PC Driver could hang the user's PC under certain conditions, including when the output queue fills (e.g. if the connection with the ISP Base Station was lost). * Fine-tuned the data rate throttling mechanism to obtain more accurate throttling, and to correctly throttle at speeds above 1 Mbps. * Increased OR Client performance by up to 20%. ------------------------------------------------------------------- 4. INSTALLATION NOTES 4.1 Standard Installation Please refer to the install.txt file. ------------------------------------------------------------------- 5. TECHNICAL CONSTRAINTS 5.1 Compatibility with previous ISP Base Station versions The Frequency Channel Auto-Select feature IS NOT compatible with older versions of OR Client ISP Base Station software. All other features should work with older ISP Base Stations. 5.2 Frequency Channel Auto-Select * For OR Client Frequency Channel Auto-Select to work correctly, the NWID and Frequency Channel numbers MUST match (i.e. Frequency Channel 6 and NWID 6). If the channel number and NWID used by your ISP Base Station are not the same number, then the PC driver WILL NOT correctly establish a connection when Channel Auto-Select is enabled. * For Frequency Channel Auto-Select to work, you MUST run kernel version 3.88 or higher on your ISP Base Station. * The PC Driver will work correctly with all existing ISP Base Stations when Frequency Channel Auto-Select is DISABLED. ------------------------------------------------------------------- 6. KNOWN ISSUES None. =================================================================== END OF FILEDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.