===================================================================
Avaya Inc. July 2002
Outdoor Router Client
for Microsoft Windows operating systems
===================================================================
This readme.txt covers general information about this release
of the Client Manager. For specific information about
installing the driver in a particular operating system, consult
the readme.txt and install.txt files contained in the appropriate
subdirectories.
TABLE OF CONTENTS.
1. SOFTWARE DESCRIPTION
2. SUPPORTED OPERATING SYSTEMS
3. NEW IN THIS RELEASE
4. INSTALLATION NOTES
5. TECHNICAL CONSTRAINTS
6. KNOWN ISSUES
-------------------------------------------------------------------
1. SOFTWARE DESCRIPTION
1.1 About this software
This software package supports the OR Client network protocols
on Windows PC's using the following network interface cards:
* Avaya Wireless PC Card (Silver and Gold)
* WaveLAN/IEEE Turbo 11 Mb Card
* WaveLAN/IEEE Turbo Card (8 Mb)
* WaveLAN/IEEE PC Card (2 Mb)
-------------------------------------------------------------------
2. SUPPORTED OPERATING SYSTEMS
2.1 Overview
This release of the Client Manager supports the following
operating systems:
* Windows 95
* Windows 98
* Windows 98 SE
* Windows ME
* Windows NT 4.0 (SP4 or higher)
* Windows 2000
* Windows XP
!!!!!!!!!!!!!
! IMPORTANT !
!!!!!!!!!!!!!
Read the 'readme.txt' and 'install.txt' files in
each of the directories before installing the driver. They
contain important information which may prevent you from
having problems in the first place.
-------------------------------------------------------------------
3. NEW IN THIS RELEASE
3.1 Client Manager
* Includes support for Ruby PC Cards.
* Enabled both AP Client mode and OR Client
mode without re-installing the driver
* AP Client mode matches the 7.02 release of
the Agere NDIS driver
* New release of the Client Manager requires use of new
license keys. The new license keys are
of the form 'SHKG-A105-CA40-42L9-AKDJ'. Notice that
the new license key is visibly different from older
license keys.
- New license key DOES NOT protect the System Access
Pass Phrase.
- New license key contains the Data Rate throttle
embedded inside of it, so the user does not
have to enter the Data Rate separately
* Added OR Client Frequency Channel Auto-Select functionality
for automatically detecting the frequency channel the
ISP Base Station is running on. This makes installation
and migration to different frequency channels much
easier to manage.
- For OR Client Frequency Channel Auto-Select to work
correctly, the NWID and Frequency Channel numbers MUST
match (i.e. Frequency Channel 6 and NWID 6). If the
channel number and NWID used by your ISP Base Station
are not the same number, then the PC driver WILL NOT
correctly establish a connection when Channel
Auto-Select is enabled.
- For Frequency Channel Auto-Select to work, you MUST run
image version 3.88 or higher on your ISP Base Station.
- The PC Driver will work correctly with all existing
ISP Base Stations when Frequency Channel Auto-Select is
DISABLED.
* Solved a bug where the OR Client PC Driver could hang
the user's PC under certain conditions, including when
the output queue fills (e.g. if the connection with the
ISP Base Station was lost).
* Fine-tuned the data rate throttling mechanism to
obtain more accurate throttling, and to correctly
throttle at speeds above 1 Mbps.
* Increased OR Client performance by up to 20%.
-------------------------------------------------------------------
4. INSTALLATION NOTES
4.1 Standard Installation
Please refer to the install.txt file in each driver
installation subdirectory.
-------------------------------------------------------------------
5. TECHNICAL CONSTRAINTS
5.1 Compatibility with previous ISP Base Station versions
The Frequency Channel Auto-Select feature IS NOT compatible
with older versions of OR Client ISP Base Station software.
All other features should work with older ISP Base Stations.
5.2 Frequency Channel Auto-Select
* For OR Client Frequency Channel Auto-Select to work
correctly, the NWID and Frequency Channel numbers MUST
match (i.e. Frequency Channel 6 and NWID 6). If the
channel number and NWID used by your ISP Base Station
are not the same number, then the PC driver WILL NOT
correctly establish a connection when Channel
Auto-Select is enabled.
* For Frequency Channel Auto-Select to work, you MUST run
image version 3.88 or higher on your ISP Base Station.
* The PC Driver will work correctly with all existing
ISP Base Stations when Frequency Channel Auto-Select is
DISABLED.
-------------------------------------------------------------------
6. KNOWN ISSUES
This release does not support Ruby PC Cards.
===================================================================
END OF FILE
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.