1. landriver.zip Driver
2. NW41X5X.TXT File Contents

NW41X5X.TXT Driver File Contents (landriver.zip)

*****************************************************************************
*                                                                           *
*                  SURECOM EP-320X-R 100/10M PCI Adapter                    *
*                                                                           *
*           Installation guide for Novell Netware Server 4.1x/5.0           *
*                                                                           *
*****************************************************************************

   Introduction:
   -------------
   This document describes the procedure to install the NetWare v4.1x/5.0
   server driver for SURECOM EP-320X-R 100/10M PCI Adapter.

   Location of Driver:     \NETWARE\EP320R.LAN

   Installaton Procedure :
   ---------------------
      Before you start with the installation  process,  make sure that
      the Novell NetWare v4.1x/5.0 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.
      1. Insert the EP-320X-R Driver Diskette into drive A and check the
         contents of subdirectory  A:\NETWARE , It should contain the
         following file :

         EP320R.LANÄÄÄ  Novell NetWare V4.1x/5.0 Server Driver
         EP320R.LDIÄÄÄ  Novell NetWare V4.1x/5.0 Server Driver Installation
                        Information File

      2. At the  NetWare prompt (indicated by the Server name), run the
         INSTALL.NLM program by typing:

         server name: LOAD INSTALL <Enter>

      3. Select "Driver Options" and press <Enter>.

      4. Select  "Configure Network Drivers"-> "Discover and Load Drivers"
         and press <Enter>.

      5. The EP320R.LAN driver should appear in your choice list for the
         'Select a  LAN  Driver' field. Choose this  driver to start the
         driver loading and  binding  procedure.  This will allow you to
         load and bind all 4 frame types supported by NetWare.

      6. Add the LOAD and BIND statements you require to the server's
         AUTOEXEC.NCF file so that the LAN driver will load automatically
         each time the server starts up.

      Installation Notes:
      -------------------
      1.Installing Multiple LAN Adapters:
         The keyword  "SLOT"  is  provided for multiple LAN adapters in a
         single server by the driver EP320R.LAN.  So, add EtherID in LOAD
         commands. For example:

         LOAD EP320R FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1
         BIND IPX TO LAN_A NET=11
         LOAD EP320R FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2
         BIND IPX TO LAN_B NET=22

      2. The keyword  "MEDIUMTYPE" is provided for specifying adapter's speed
         ( AUTO, 100FULL, 100HALF, 10FULL, 10HALF ) , add MEDIUMTYPE in LOAD
         commands. For example:

         LOAD EP320R FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 MEDIUMTYPE=100FULL
         BIND IPX TO LAN_A NET=11

------------------------------- End Of File ---------------------------------

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.