Logitech(R) SetPoint(TM) Software 2.13 README File (c) 2004 Logitech, Inc. All Rights Reserved. README TABLE OF CONTENTS 1. Installation 1.1 Standard installation. 1.2 Uninstall. 2. Troubleshooting - General Topics 2.1 "My Mouse”, “My Keyboard” tab don’t appear in the SetPoint Software. 2.2 Compatibility with Logitech MouseWare(R) and iTouch (R). 2.3 Support for Logitech's devices for Bluetooth. 2.4 Cannot uninstall MouseWare after installing SetPoint on Windows(R) 98. 2.5 Support for Cordless Click! Mice on Windows(R) 2000/Windows(R) XP. 2.6 Connection issues for cordless devices. 2.7 Error message when entering standby in Windows(R) XP. 2.8 No support for Input Method Editor (IME) in Keystroke. 2.9 Microsoft(R) Internet Explorer 6.0 is required for MediaLife and Musicmatch Radio for MediaLife. 2.10 QuickTour is not available on Windows(R) 98 Gold. 2.11 Applications installed after installing SetPoint. 2.12 Multimedia buttons won't work in WinDVD 5.0. 2.13 Zoom In/Out function is reversed in Microsoft(R) Internet Explorer. 3. Troubleshooting - Mouse Topics 3.1 Detection issues with USB mice. 3.2 Detection problems with PS/2 pointing devices. 3.3 Cannot select applications to be included in Application Specific Settings. 3.4 Application Specific Settings option is disabled. 3.5 No Smart Move feature on Windows(R) 98. 3.6 V500 Cordless Mouse loses connection. 4. Troubleshooting - Keyboard Topics 4.1 The Play/Pause keys don't work on Windows(R) 2000. 4.2 Double on-screen key effects superimposed on each other. 4.3 Seeking forward/backward functions on keyboard. 4.4 Eject key will not load the CD/DVD drive on a Laptop. 4.5 Eject key will not load the CD/DVD drive in Windows(R) 98 and Windows(R) Me. 4.6 Yahoo!(R) Messenger less than 6.0 is not supported. 5. For more information ________________________________________ 1. Installation Logitech SetPoint supports Windows(R) 98, Windows(R) Me Windows(R) 2000 and Windows(R) XP. Bluetooth devices are only supported in Windows(R) 2000 and Windows(R) XP. 1.1 Standard installation You must be logged on with administrative privileges to install. Insert the Logitech SetPoint Software CD into your CD- ROM drive. The installation program should start automatically. If it does not, browse the CD and double click on the file "SETUP.EXE", located in the root directory of the CD-ROM drive, to install the software. 1.2 Uninstall To uninstall the Logitech SetPoint Software from your system, click on the "Add/Remove Programs" icon in the Windows Control Panel, select "Logitech SetPoint" and click the "Remove" button. 2. Troubleshooting - General Topics 2.1 "My Mouse”, “My Keyboard” tab don’t appear in the SetPoint Software If you have not used your mouse, keyboard, or MediaPad for some time, it goes to standby mode to conserve power. Moving the mouse, or touching a key on the keyboard or MediaPad should cause the appropriate tab to re-appear. If the tabs still don't appear, right click on the SetPoint icon in the system tray and select Exit. Then re-launch SetPoint from the Programs menu (Start -> Programs/Logitech/Mice and Keyboards/Settings). 2.2 Compatibility with Logitech MouseWare(R) and iTouch(R) This section is relevant to users who already used Logitech mouse or keyboard device on their system and have installed MouseWare or iTouch software. If you are completely replacing your old devices with the new devices, we recommend that you uninstall MouseWare or iTouch before installing SetPoint. If you are using one of your older devices and a new device on the same system, please refer to the following sections to install SetPoint along with MouseWare and iTouch depending on your operating system. Your previous devices are only supported with MouseWare for the mouse and iTouch for the keyboard and will not appear in SetPoint control panel. Your new devices are only supported by SetPoint for both mice and keyboard. See section 2.4 for Cordless Click! or a Cordless Click! Plus mouse. Windows(R) 98 and Windows(R) Me: iTouch can not be used on the same system with SetPoint. iTouch is automatically disabled when SetPoint is installed and re-enabled when SetPoint is uninstalled. If you install iTouch on a system after installing SetPoint,you may lose functionality until you uninstall iTouch. MouseWare can be used on the same system with SetPoint. However, you can not uninstall MouseWare as long as SetPoint is still installed. If you want to remove MouseWare, you have to uninstall SetPoint first and re-install afterward. See section 2.3 for more information. Windows(R) 2000 and Windows(R) XP: iTouch and MouseWare can be used on the same system with SetPoint. However, for the devices connected on PS/2 you may lose enhanced functionality in the following situations: If your previous Logitech mouse or keyboard is connected on the PS/2 port, you will lose enhanced functions for this device after installing SetPoint. To restore the enhanced functions, reinstall MouseWare for the mouse or iTouch for the keyboard. If your new Logitech mouse or keyboard is connected on the PS/2 port, you may lose enhanced functions if you install MouseWare or iTouch after installing SetPoint. To restore the enhanced functions, reinstall SetPoint. 2.3 Support for Logitech's devices for Bluetooth. If you are using Logitech's devices for Bluetooth, install SetPoint version 1.05 first and then upgrade to SetPoint version 2.12. If you install SetPoint version 2.12 only, you will not have Bluetooth functionality. 2.4 Cannot uninstall MouseWare after installing SetPoint on Windows(R) 98 If you install SetPoint on a system with MouseWare installed, MouseWare cannot be uninstalled until you remove SetPoint. To uninstall MouseWare, uninstall SetPoint first, then uninstall MouseWare, then re-install SetPoint. 2.5 Support for Cordless Click! Mice on Windows(R) 2000/Windows(R) XP For Windows(R) 2000 and Windows(R) XP users only: If you were using Logitech MouseWare with a Cordless Click! or a Cordless Click! Plus mouse, installing SetPoint on top of MouseWare will transfer control of your mouse from MouseWare to SetPoint. MouseWare will no longer recognize your mouse. If you were only using one mouse with MouseWare, you can now uninstall MouseWare and use SetPoint. 2.6 Connection issues for cordless devices If your cordless device does not seem to respond, or exhibits erratic behavior, please try the following to resolve the issue: 1) Check the batteries of your device. If your cordless device uses Alkaline batteries, try replacing them with new batteries. If you're using a Logitech rechargeable cordless mouse, confirm the batteries have a full charge. This will verify the issue is not occurring because of low or dead batteries. 2) Check the receiver's connection to the system. Check that the connector is clean, and that it's connected securely to the correct port. If connected to switch-boxes, or hubs, try connecting the receiver directly to the system, to verify there's no interference from those devices. 3) Try changing the location of the receiver. Move it away from electrical devices that could cause interference with the radio signals, such as monitors, speakers, zip drives, etc. Also avoid placing the receiver on metal surfaces that could interfere with the signal. 4) Press the "connect" button on the receiver, then press the "connect" button on the device (normally located on the bottom). 5) If these steps do not help resolve the issue, please refer to the Help Center installed with your Logitech software. Or visit the Logitech web site (www.logitech.com) for the latest troubleshooting information. 2.7 Error message when entering standby in Windows(R) XP The following error message may appear when attempting to enter standby: "The device driver for the 'HID-Compliant ...' device is preventing the machine from entering standby. Please close all applications and try again. If the problem persists, you may need to update this driver." This message displays because your PC BIOS is not fully ACPI (Advanced Configuration and Power Interface) compliant. To avoid seeing this message again, follow these steps: 1) Click on the "Start" button on the Windows Desktop. 2) Select "Settings", then "Control Panel". 3) From the Control Panel, double click on the "System" icon. 4) From the System Properties, click on the "Hardware" tab. 5) Click on the "Device Manager" button. 6) From the Device Manager, double click the "Mouse" icon. 7) Double click on the 'HID-Compliant ...' mouse icon. 8) From the Mouse Properties dialog box, click on the "Power Management" tab. 9) Clear the check box "Allow this device to bring the computer out from standby". Another solution is to update the BIOS of your PC. Please refer to the PC BIOS Manufacturer documentation for doing this. 2.8 No support for Input Method Editor (IME) in Keystroke Assignment The Keystroke Assignment function does not support the Input Method Editor (IME). It is therefore not possible to assign keystrokes that can be entered only through IME. 2.9 Microsoft(R) Internet Explorer 6.0 is required for MediaLife and MusicMatch Radio for MediaLife You will not see the option to install MediaLife and MusicMatch Radio for MediaLife if Microsoft(R) Internet Explorer 6.0 is not installed on your system. 2.10 QuickTour is not available on Windows(R) 98 Gold The QuickTour is not supported on Windows(R) 98 Gold. Please refer to the Help Center instead. 2.11 Applications installed after installing SetPoint If the applications such as the Media Players or the Messenger services are installed after installing the SetPoint software, they will not appear in SetPoint until you exit SetPoint and re-launch. Follow these steps to exit and re-launch SetPoint: - Right click on the SetPoint icon in the system tray and select Exit. - Re-launch SetPoint from the Programs menu (Start ->Programs/Logitech/Mice and Keyboards/Settings). 2.12 Multimedia buttons (Play/Pause, Stop, Next, Previous, Seeking Forward/Backward) won't work in WinDVD 5.0 If you are using WinDVD 5.0 and the player panel is docked to the presentation window, Multimedia buttons won't work.You will have to undock the panel for the buttons to execute. 2.13 Zoom In/Out function is reversed in Microsoft(R) Internet Explorer The definition of Zoom In/Out is reversed in Microsoft(R) Internet Explorer. If you try to Zoom In/Out with the keyboard/Mouse buttons, it will perform opposite function. 3. Troubleshooting - Mouse Topics 3.1 Detection issues with USB mice If your USB mouse is not detected properly or does not function, please use the following steps to troubleshoot the problem. Note: if you have a PS/2 mouse, you can install and use it to follow the procedure. Otherwise, use the keyboard to navigate. 1) Click the Start button or press Ctrl-Esc to bring up the Start menu, select "Settings", then "Control Panel". 2) Select the System icon and press Enter to open the System Properties. 3) From the System Properties, select the Device Manager tab. On Windows(R) 2000 and Windows(R) XP, select the Hardware tab, then press the Device Manager button. 4) Under the Mouse section, there should be a mouse icon that states: "HID-compliant mouse". On Windows(R) 98 or Windows(R) Me, you should also see another entry that states the name of your USB device. If there is a yellow exclamation or red X mark on either of these entries, highlight it and press the Delete key to remove it. 5) Once the problem entries have been removed, press the "Refresh" button and allow Windows to re-detect the mouse. On Windows(R) 2000 and Windows(R) XP, select "Scan for Hardware Changes" from the Action menu. 6) Look at the entries under the Mouse section again, verify that there are no errors reported. 7) Power down the computer and restart Windows. Test the USB device to see if it is now functional. Other USB troubleshooting tips: - If you have problem getting the mouse to work on a hub, try connecting the mouse directly to the USB port on the system. - Try a second USB mouse in the same port or try the USB mouse on a second system to verify it is working correctly. If needed contact the vendor of your system to verify the USB ports are correctly enabled, or if updated drivers are available. - Uninstall SetPoint and see if the USB mouse works with the native Microsoft(R) drivers provided on your Windows CD-ROM. - You may also want to contact the vendor of your USB chipset for updated USB drivers. 3.2 Detection problems with PS/2 pointing devices If your mouse is connected to the mouse port and is not detected by the system, attempt the following step(s): 1) Your mouse port might need to be enabled through the SETUP menu of your computer. You may also need to set the configuration for the internal pointing device to "Auto- Disable" or "Auto-Select" setting. Please check your computer documentation regarding the SETUP menu. 2) If you have a mouse with both serial and mouse port adapters, connect the mouse to the computer through the serial port. Reboot and check if the mouse is detected properly. 3) If adapter(s) were not included in your package, your mouse was designed to work on only one type of port (Serial OR PS/2). Refer to your package for the type of port your mouse supports. 4) If the system also has a USB mouse attached and the PS/2 mouse is not correctly detected by SetPoint, either try unplugging the USB mouse or try turning off USB legacy support in the BIOS to see if that resolves the issue. Please consult the documentation provided with your computer on how to change BIOS settings. If the problem persists, please check for a possible computer BIOS ROM upgrade from your computer manufacturer. Some notebook systems have both an external Mouse Port and an integrated Pointing Stick, which is connected to the Mouse Port. If your mouse is having difficulty running on the Mouse Port of this type of system, try using the USB port instead. 3.3 Cannot select applications to be included in Application Specific Settings Application Specific Settings are only applicable to Microsoft(R) Word, Microsoft(R) PowerPoint, Microsoft(R) Outlook(R) and Outlook(R) Express. You cannot add other applications or change the behavior of the settings. 3.4 Application Specific Settings option is disabled If you change the default button assignment for the Back and/or Forward buttons, the Application Specific Settings are disabled because you have chosen to override them. To re-enable the Application Specific Settings, click the Restore Defaults button. 3.5 No Smart Move feature on Windows(R) 98 This feature is only available on Windows(R) XP, Windows(R) 2000 and Windows(R) Me. 3.6 V500 Cordless Mouse loses connection. If your V500 Cordless Mouses gets disconnected, go to www.logitech.com/receiver-readme to download the reconnection utility.Run the executable file and press the reset button on the bottom of the mouse. 4. Troubleshooting - Keyboard Topics 4.1 The Play/Pause keys don't work on Windows(R) 2000 You need to install the Windows(R) 2000 Service Pack 2 or higher. 4.2 Double on-screen key effects superimposed on each other This can happen on computers that already have other multimedia keyboard software installed. To correct this, you could either disable the On Screen Display in SetPoint or uninstall the other keyboard software using the Add/Remove Programs feature in the Windows Control Panel. 4.3 Seeking forward/backward functions on keyboard On Windows(R) 98 and Windows(R) Me, the seeking forward/backward functions do not work in Windows Media Player 9. These functions also do not work if the media file you are playing does not support such functionality. 4.4 Eject key does not load the CD/DVD drive on a Laptop You will not be able to load the CD/DVD drive of your Laptop with the eject key. 4.5 Eject key will not load the CD/DVD drive in Windows(R) 98 and Windows(R) Me. Load Drive functionality is not available in Windows(R) 98 and Windows(R) Me. 4.6 Yahoo!(R) Messenger less than 6.0 is not supported If you are using Yahoo Messenger and the version is less than 6.0, the status key on the keyboard will not function. 5. For more information If you experience issues with your Logitech device that are not addressed in this Readme file or the Help Center installed with your SetPoint software, please visit our web site at http://www.logitech.com for the latest information.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.