0629a (Sensaura Library 2135) 0629a.INF : add ecs model 1019&0A52 (lpc model) 0629 (Sensaura Library 2135) STEP1.SYS : fix bugs : MPU401 crash system on 37 chip STEP2.SYS : Add a key called "DisableMPU401XP" in INF file to see if MPU401 should be disabled in Windows XP under the condition "EnableLegacy = 1 or 3". ============================================================================ 0628 (Sensaura Library 2135) STEP1.SYS : implement MPU401 as a PCI device interface rather than subdevice STEP2.SYS : fix the problem that XP HCT failed on driver verifier, it is due to inappropriate processing on PnP IRP STEP3.SYS : 1. delete port event notify, because it has bugs in Win2000, WinME, and Win98 2. add 3 dummy mute node to overcome the HCT mixer driver test errors STEP4.SYS : fix MPU401 failed on KsDirectMusic test ============================================================================ 0627 (Sensaura Library 2135) STEP1.SYS : 1. support Digital Right Management ---> Copy Protect STEP2.SYS : 1. support Digital Right Management ---> Digital Output Disable 2. delete the support of 11k, 16bit, mono format in DataRangeIntersection STEP3.SYS : 1. restore the support of 11k, 16bit, mono format in DataRangeIntersection, since this is not a failure. STEP4.SYS : 1. Correct some errors in "KsStudio.exe". Remove the functions that support supermix node. Use WaveFormatExtensible format in DataRangeIntersection. STEP5.SYS : 1. fix Digital Right Management ---> Digital Output Disable. STEP6.SYS : 1. Solve the fail in HCT, Wave driver test (close MPU401 and game), WaveoutRestart. STEP7.SYS : 1. No change, only modify INF file to pass INF checker. STEP8.SYS : 1. Topology uses multiplexer acrhitecture. 2. Add Microphone gain, range 0dB ~ 12dB. Set by the key, "MicAddGainDB", in INF file. STEP9.SYS : 1. Add three volume node (LineIn_WaveIn, Aux_WaveIn, CD_WaveIn) and use port calss event to notify each other, if any change happens. STEP10.SYS : 1. Correct the error in driver verifier. The handler of port calss event must be in non-paged memory. STEP11.SYS : 1. remove microphone add gain, restore renderer.cpp, and remove helper.cpp. STEP12.SYS : 1. remove stereo mix volume. when microphone gain = 0dB. do nothing. STEP13.SYS : 1. remove stereo mix volume. 2. when microphone gain = 0dB. do nothing. (Jhon). STEP14.SYS : 1. Correct the problem of "forget release dmachannel interface". The function of this version is the same as STEP10.SYS. STEP15.SYS : 1. When OS is WindowsXP, 2000, ME, open MPU401 and game. 2. Add a private property "KSPROPERTY_CMAUDIO_MIXER_UI" to indicate mixer.exe whether the Validity SpdifIn, CopyProtect Buttons should be shown or not. 3. use new CMnprop.dll, which support interface "ICMAudioProperty2". INF : modify INF as the INF of 0625b ============================================================================ ============================================================================ 0626 (Sensaura Library 2135) SYS : change ac-3 topology to resolve phantom controls problem on mixer 0625a (Sensaura Library 2135) INF : add uninstall mechanism on driver package 0625 (Sensaura Library 2135) STEP1.SYS : 1. remove limitations on MONITER_SPDIF_IN 2. disable MPU401 if PCI IRQ above 15 (for Intel 845 problem) INF : multi-section sub-vender/sub-device ============================================================================ ============================================================================ 0624b (Sensaura Library 2216) STEP1.SYS : 1. fix the problem of initialization failure of grapher INF : Add uninstall mechanism on system 0624a (Sensaura Library 2135) STEP1.SYS : 1. remove limitations on MONITER_SPDIF_IN 2. disable MPU401 if PCI IRQ above 15 (for Intel 845 problem) 0624 (Sensaura Library 2135) STEP1.SYS : 1. Change the name PcSpeaker to MonoIn STEP2.SYS : 1. Open External Bass 2. modify pnp.cpp and pnp.h ============================================================================ 0623 (Sensaura Library 2135) STEP1.SYS : 1. fix the power management problems with Sensaura STEP2.SYS : 1. Add "ADAPTER_DIGITAL_SHARED" 0622 (Sensaura Library 2135) STEP1.SYS : 1. In "AdapterDispatchPower", when entering power state D3, we should CloseStreamManager. Otherwise, system will be crashed, because Sensaura rendering timer is still working. 2. In case we go to any sleep state we disconnect the interrupt service reoutine from the interrupt. 3. Delete "retard closing StreamManager". It has no use now. 4. Solve the problem of "when Reverb is enabled and wave check box in MS volume control is muted, we still can hear the reverb sound". STEP2.SYS : 1. In private property "KSPROPERTY_CMAUDIO_MISCELLANEOUS", "FuncLimited", and "CutMSSpeakerConfig" can be get and set. STEP3.SYS : 1. Fix the problem in HCT wave driver "test case 9:36 sampling rate accuracy". When the WaveIn format is other than 44k/48k, we should fail that WaveIn capture in ValidateFormat. Then system will convert itself. STEP4.SYS : 1. Correct the noise of MicAsCenterBass, when start and stop playing. 2. Use Sensaura's new library to set 3dBBoost=TRUE, and take multiply coefficient 1.4 out. STEP5.SYS : 1. When set to the maximum left or right pan in wave control of the Microsoft volume control, the front 2 speakers will all be muted. (In STEP1.SYS, point 4, we made some mistake) 2. In step4, there is an eorror, "the LineInAsRear setting is not issued to CMI8738 at Windows start up" (only in step4). We correct this problem in step5. 0621 (Sensaura Library 2135) STEP1.SYS : 1. The full function chip, can be used as FuncLimited LX chip. 2. When chip is FuncLimited, delete AC3-pin in WaveCyclicSB16. 3. When use 44k rendering for SPDIFOUT, we must receive a 2 channels format from system, because the Sensaura library can't support channel mixing st this time. (if we un-check Reverb, and use MCI to play sound, the sound will be missing). 4. Correct the errors in LinInAsRear, LineInAsBass, MicAsBass. 5. In HCT test, retard closing StreamManager for 1 sec, if the sound rendering time is less than 1 sec. #define STREAM_MANAGER_DELAY_COUNT 400 // 1 unit = 2.5ms #define STREAM_MANAGER_DUE_TIME (-10000000)// 1 unit = 100ns STEP2.SYS : 1. The Matrox PCVCR problem: When recording is active, the rendering should switch to DSSPEAKER_QUAD, only when the dwSpeakerConfig is DSSPEAKER_5POINT1. STEP3.SYS : 1. When we multiply a coefficient 1.3 to the Sensaura rendered data, the value may possibly overflow (> 32767 or < -32768), so we should do the saturation in the MMX code (This is a temporally solution). STEP4.SYS : 1. When WinDVD play AC3 digital data, 039 chip use channels 1 to play, 037 use channel 0 to play, so we should mute channels 0, and 1 simultaneouly. Otherwise, noise will be heard. This solution can cover all chip version. 0620 (Sensaura Library 2135) STEP1.SYS : 1. After Sensaura rendering, multiply a coefficient 1.3 to increase the signal level for HCT test of Sensaura WDM driver. 2. only Sensaura INF exists (HCTINF is cancelled). #define VOLUME_COEFF1 13 #define VOLUME_COEFF2 20 STEP2.SYS : 1. In INF file, use "CutMSSpeakerConfig" to disconnect the speaker config from Microsoft control panel. STEP3.SYS : 1. When judging FuncLimited, chip 055 is inversed. 2. When chip is FuncLimited, ValidateFormat will fail the format, KSDATAFORMAT_SUBTYPE_DOLBY_AC3_SPDIF. 0619 (Sensaura Library 2135) STEP1.SYS : 1. PC Speaker mute 2. Microphone recording gain control (Boost when recording) 3. When playing a 6 channel wave during recording is active, inform Sensaura and switch to 4 speakers. 4. In KSPROPERTY_CMAUDIO_MISCELLANEOUS property, add an item called, EnableSensaura, to save ADAPTER_USE_SENSAURA in registry. STEP2.SYS : 1. In KSPROPERTY_CMAUDIO_SPDIF property, add an item called, SamplingRate, to select rendering SPDIF on 44k or 48k 2. fix speaker geometry 3. fix Microphone recording gain control (stored in HWMixerExtSettings) STEP3.SYS : 1. fix the bug of "When recording is active, switch to 4 speakers" 0618 (Sensaura Library 2135) STEP1.SYS : 1. Use multiplex node and sum node to select recording source in topology. User can choose multiple sources in MS recording control (traditional 8738 way). STEP2.SYS : 1. fix the problem that 037 chip 18H D24 cannot read correctly 0617 (Sensaura Library 2135) STEP1.SYS : 1. Use multiplex node to select recording source in topology 2. "RecordMultiplex" in INF is used as the default selection (1-5) RecordMultiplex = 1 ---> Wave RecordMultiplex = 2 ---> Line In RecordMultiplex = 3 ---> Aux RecordMultiplex = 4 ---> CD RecordMultiplex = 5 ---> Microphone RecordMultiplex = 6 ---> All (Wave + LineIn + Aux + CD + Mic) 3. KSPROPERTY_CMAUDIO_CHIP_INFO can get CMI33, CMI37, CMI39, CMI55 STEP2.SYS : 1. RecordMultiplex = 6 ---> decided by RecordSettings 2. Add the following property, which is used to determine the private combined record-settings. KSPROPERTY_CMAUDIO_RECORD_SELECT = 9; 0616 (Sensaura Library 2135) STEP1.SYS : 1. Solve the problem of MCI FALSE-Multi-Channel. Use "Enable-Reverb" to control MCI 2 or 6 channels 2. Add the following properties KSPROPERTY_CMAUDIO_CHIP_INFO = 6; KSPROPERTY_CMAUDIO_CHANNEL_NUM = 7; KSPROPERTY_CMAUDIO_PLAY_6CHAN = 8; 3. Note that KSPROPERTY_CMAUDIO_PLAY_6CHAN can over-write "Enable-Reverb" in KSPROPERTY_CMAUDIO_GLOBAL_REVERB 4. Disable ForceGenerateCenter/ForceCopyMode in property page 0615 (Sensaura Library 2135) STEP1.SYS : Add a registry key, MasterVolAtten, which can cantrol the master volume Attenuation. MasterVolAtten's unit = dB, ex., 0x0001 = 1dB, 0x0002 = 2dB STEP2.SYS : Add 055 chip version judgement (by John) STEP3.SYS : 1. Mute LineIn, Aux, CD, and Mic, when volume level is 0 2. fix the bugs of reported maximum channels (=6, not 4), but 033, 037, 039_As_037 the SpeakerConfig is limited to 4 0614 (Sensaura Library 2135) STEP1.SYS : fix the bugs of speaker settings, the sound channels heard is coincident with the speaker settings in mixer.exe now. The speaker settings of direct sound is Microsoft's problem. It has no solution for the present. 0613 (Sensaura Library 2135) STEP1.SYS : Sensaura update channels.cpp, common.cpp, mintopo.cpp, shared.h, (in, ConvertLogToLin(int vol, int pan), a second augument is added) 0612 (Sensaura Library 2135) STEP1.SYS : Sensaura library updated (fixed bugs on "Soldier of Fortune", "Unreal Tournement") STEP2.SYS : 1. Force central generation on 6-channel 2. fix the bug of "AdapterCommon->QueryCapability return wrong BOOLEAN state" 3. fix the bug of "the set method of PropertyHandler_Miscellaneous always return FALSE" STEP3.SYS : 1. Microphone gain control 0611 (Sensaura Library 2133) STEP1.SYS : Wave Playback/Capture, Force CopyMode on private mixer(new dll) 0610 (Sensaura Library 2133) STEP1.SYS : some modifications from SENSAURA 0609 (Sensaura Library 2133) STEP1.SYS : h/w copy mode usage for A-A path Control enable h/w bass as 5-channel activate 0608 (Sensaura Library 2133) STEP1.SYS : add front left/right volume control to private mixer STEP2.SYS : optimise dma channel management (intermediate version) STEP3.SYS : optimise dma channel management STEP4.SYS : add chip capability query support (full function or LX/MX) 0607 (Sensaura Library 2133) STEP1.SYS : support AC/3 over S/PDIF (buggy) STEP2.SYS : bug fixed (Working on PDVD3.0, WinME, ChipVer 37/39) Mic Volume restoration after system suspension 0606 (Sensaura Library 2133) STEP1.SYS : update to Sensaura Library 2133 (fix global reverbation on 2D stream) 0605 (Sensaura Library 2128) --------- STEP1.SYS : global reverbation, surround mode bug fixed STEP2.SYS : some Sensaura bug fixed STEP3.SYS : STEP4.SYS : software volume control for 4/6 channel STEP5.SYS : global reverbation interface STEP6.SYS : restore/save all settings automatically STEP7.SYS : full-duplex review STEP8.SYS : full-duplex 037/039 optimization STEP9.SYS : some bug fixed 0604 (Sensaura Library 2120) -------- 0604.SYS : Private Property Page (support SPDIF) 0603 --------- STEP6.SYS : 6-channel playback with Sensaura Library 2113A (buggy) STEP7.SYS : 6-channel playback bypass Sensaura Library 2113A STEP8.SYS : 6-channel playback with Sensaura Library 2120Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.