// osd setting osdcfg.DoOSD = 0 osdcfg.OSDyc0 = 0 osdcfg.OSDyc1 = 255 osdcfg.OSDuc0 = 0 osdcfg.OSDuc1 = 128 osdcfg.OSDvc0 = 0 osdcfg.OSDvc1 = 128 // Threshold thcfg.THACCoeffSet0 = 0 thcfg.THACCoeffStartpoint = 1 thcfg.THedge = 20 thcfg.THmotion = 30 thcfg.THblending = 4 thcfg.THbigedge = 900 thcfg.THsmalledge = 300 thcfg.THedgestatistics = 20 thcfg.THmotionstatistics = 30 thcfg.THbigedgestatistics = 900 thcfg.THsmalledgestatistics = 300 // Deinterlace deintercfg.DeInter_Always_Motion = 0 deintercfg.DeInter_Always_Blending = 1 deintercfg.DeInter_Always_Weave = 0 // IIP setting iipcfg.Bit_Length = 10 iipcfg.CCM_R_0 = 0 iipcfg.CCM_R_1 = 0 iipcfg.CCM_R_2 = 256 iipcfg.CCM_R_3 = 0 iipcfg.CCM_G_0 = 128 iipcfg.CCM_G_1 = 0 iipcfg.CCM_G_2 = 0 iipcfg.CCM_G_3 = 128 iipcfg.CCM_B_0 = 0 iipcfg.CCM_B_1 = 256 iipcfg.CCM_B_2 = 0 iipcfg.CCM_B_3 = 0 iipcfg.R_Gain = 288 iipcfg.G_Gain = 256 iipcfg.B_Gain = 270 iipcfg.R_Offset = 0 iipcfg.G_Offset = 0 iipcfg.B_Offset = 0 iipcfg.Gamma_R_P0_C = 28 iipcfg.Gamma_R_P0_Y = 0 iipcfg.Gamma_R_P1_C = 32 iipcfg.Gamma_R_P1_Y = 7 iipcfg.Gamma_R_P2_C = 28 iipcfg.Gamma_R_P2_Y = 15 iipcfg.Gamma_R_P3_C = 28 iipcfg.Gamma_R_P3_Y = 29 iipcfg.Gamma_R_P4_C = 26 iipcfg.Gamma_R_P4_Y = 57 iipcfg.Gamma_R_P5_C = 27 iipcfg.Gamma_R_P5_Y = 83 iipcfg.Gamma_R_P6_C = 17 iipcfg.Gamma_R_P6_Y = 110 iipcfg.Gamma_R_P7_C = 12 iipcfg.Gamma_R_P7_Y = 178 iipcfg.Gamma_R_P8_C = 8 iipcfg.Gamma_R_P8_Y = 223 iipcfg.Gamma_G_P0_C = 28 iipcfg.Gamma_G_P0_Y = 0 iipcfg.Gamma_G_P1_C = 32 iipcfg.Gamma_G_P1_Y = 7 iipcfg.Gamma_G_P2_C = 28 iipcfg.Gamma_G_P2_Y = 15 iipcfg.Gamma_G_P3_C = 28 iipcfg.Gamma_G_P3_Y = 29 iipcfg.Gamma_G_P4_C = 26 iipcfg.Gamma_G_P4_Y = 57 iipcfg.Gamma_G_P5_C = 27 iipcfg.Gamma_G_P5_Y = 83 iipcfg.Gamma_G_P6_C = 17 iipcfg.Gamma_G_P6_Y = 110 iipcfg.Gamma_G_P7_C = 12 iipcfg.Gamma_G_P7_Y = 178 iipcfg.Gamma_G_P8_C = 8 iipcfg.Gamma_G_P8_Y = 223 iipcfg.Gamma_B_P0_C = 28 iipcfg.Gamma_B_P0_Y = 0 iipcfg.Gamma_B_P1_C = 32 iipcfg.Gamma_B_P1_Y = 7 iipcfg.Gamma_B_P2_C = 28 iipcfg.Gamma_B_P2_Y = 15 iipcfg.Gamma_B_P3_C = 28 iipcfg.Gamma_B_P3_Y = 29 iipcfg.Gamma_B_P4_C = 26 iipcfg.Gamma_B_P4_Y = 57 iipcfg.Gamma_B_P5_C = 27 iipcfg.Gamma_B_P5_Y = 83 iipcfg.Gamma_B_P6_C = 17 iipcfg.Gamma_B_P6_Y = 110 iipcfg.Gamma_B_P7_C = 12 iipcfg.Gamma_B_P7_Y = 178 iipcfg.Gamma_B_P8_C = 8 iipcfg.Gamma_B_P8_Y = 223 iipcfg.Black_P = 60 iipcfg.White_P = 200 iipcfg.AWB_WIN_L = 40 iipcfg.AWB_WIN_T = 30 iipcfg.AWB_WIN_R = 120 iipcfg.AWB_WIN_B = 90 iipcfg.SUM_R1 = 0 iipcfg.SUM_G1 = 0 iipcfg.SUM_B1 = 0 iipcfg.AWB_N_VLD_W1 = 0 iipcfg.SUM_R2 = 0 iipcfg.SUM_G2 = 0 iipcfg.SUM_B2 = 0 iipcfg.AWB_N_VLD_W2 = 0 iipcfg.SUM_R3 = 0 iipcfg.SUM_G3 = 0 iipcfg.SUM_B3 = 0 iipcfg.AWB_N_VLD_W3 = 0 iipcfg.SUM_R4 = 0 iipcfg.SUM_G4 = 0 iipcfg.SUM_B4 = 0 iipcfg.AWB_N_VLD_W4 = 0 iipcfg.SUM_R5 = 0 iipcfg.SUM_G5 = 0 iipcfg.SUM_B5 = 0 iipcfg.AWB_N_VLD_W5 = 0 iipcfg.AE_WIN_L = 40 iipcfg.AE_WIN_T = 30 iipcfg.AE_WIN_R = 120 iipcfg.AE_WIN_B = 90 iipcfg.MAX_Y_CTR = 255 iipcfg.MIN_Y_CTR = 0 iipcfg.SUM_Y_CTR = 0 iipcfg.VALID_NUM_CTR = 0 iipcfg.MAX_Y_BK = 255 iipcfg.MIN_Y_BK = 0 iipcfg.SUM_Y_BK = 0 iipcfg.VALID_NUM_BK = 0 iipcfg.B_Strgth = 0 iipcfg.B_Thrshld = 0 iipcfg.SAT = 64 iipcfg.HUE = 07 iipcfg.Y_Gain = 69 iipcfg.Y_Offset = 8 iipcfg.LPF_Switch = 0 iipcfg.LPF_COEF_Y_0 = 4 iipcfg.LPF_COEF_Y_1 = 15 iipcfg.LPF_COEF_Y_2 = 26 iipcfg.LPF_COEF_Cr_0 = 4 iipcfg.LPF_COEF_Cr_1 = 15 iipcfg.LPF_COEF_Cr_2 = 26 iipcfg.LPF_COEF_Cb_0 = 4 iipcfg.LPF_COEF_Cb_1 = 15 iipcfg.LPF_COEF_Cb_2 = 26 // else setting elsecfg.clockrate = 96 elsecfg.DRAM = 2 elsecfg.HPIBufferCapacity = 7 elsecfg.ivtc_holding_time = 1 //the name of ivtc_holding_time is meaningless //it is actually a reserved field in elsecfg //elsecfg.ivtc_holding_time bitplane is like //bit[15:1] Reserved //bit[0] AVSynch information output enable // 1=enabled, 0=disabled elsecfg.v_sync_bitplane = 61536 //v_sync_bitplane is for Vertical Synch setting //For camera board, please set it to zero //For capture board, its bitplane is like //bit[15]=VSYNC_ENABLE_BIT, 1=enabled, 0=disabled //bit[14]=FID_DET_ENABLE_BIT, 1=enabled, 0=disabled //bit[13]=REPORT_ENABLE_BIT, 1=enabled, 0=disabled //bit[12]=EXEC_ENABLE_BIT, 1=enabled, 0=disabled //bit[11]=GPIO_DET_ENABLE_BIT, 1=enabled, 0=disabled //bit[10:6]=PERIOD_TIME_SELECT //bit[5:0]=GPIO_PIN_SELECTDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.