How to install Solaris/x86 version 7 or 8
1. This is the version 1.05 RTL8139/RTL810x serials driver for Solaris/x86
version 8 or 7.
2. It does not support Speed/Duplex-Force mode, it depends on
the hardware Nway auto-negotiation in this version.
3. It supports 3 PCI-VID_DID cards, VID_10EC_DID_8139 for Realtek's
native, VID_1113_DID_1211 for Accton and VID_1186_DID_1301 for
D-Link in the install script.
4. Install method:
a. network setting:(example)
hostname:solaris IP:192.168.1.1/24
b. Boot-up you Solaris/x86 and login as "root".
c. Copy the "rtls" and "Install" into the temporary location in your
hard-driver.
d. Run the Install script "sh Install" or "./Install".
e. Edit hostname in /etc/hostname.rtls0
solaris
f. Edit /etc/hosts
#Internet host table
127.0.0.0 localhost
192.168.1.1 solaris loghost
g. Edit /etc/netmask
192.168.1.0 255.255.255.0
h. Execute "init 5", Solaris will reboot and scan changed hardware environment
i. After reboot you can execute "ifconfig -a" to make sure the RTL8139 interface is up.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.