Oemsetup.inf Driver File Contents (lan_i61.zip)

;***********************************************************************
;
; OEMSETUP.INF
;
;       Intel(R) Windows NT 4.0 NetWLan driver installation for Wireless
;		LAN Cards
;
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with.  The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
;  Types specific to networking:
;
; NetAdapter,        a netcard / adapter combination or just a netcard
; NetDriver,         just a netcard driver
; NetTransport,      a complete NDIS-compliant TDI transport stack
; NetService,        an NT networking service
; NetWork,           a complete network ensemble.
; NetProvider        a complete network which supports NT MPR protocol
;============================================================================
; Current Version %VER 3.0.13.0
;============================================================================

[Identification]
    OptionType = NetAdapter

;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA, PCI, PCMCIA and MCA
;-----------------------------------------------------------------------

[PlatformsSupported]
    ISA
    PCMCIA
    PCI

;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names.  These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------

[Options]
	Wla11
	Wla11PCI

;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************

[FileConstants]
;
;  File names, etc.
;
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0

;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\Drivers\NetWLan4.sys"
IoLogMsgDLL	= "%SystemRoot%\System32\IoLogMsg.dll"

;
; Product Info
; HKEY_LOCAL_MACHINE\SOFTWARE\Intel\CurrentVersion
;
Manufacturer = "Intel"
ProductMajorVersion = "3"
ProductMinorVersion = "0"
ProductEngVersion = "130"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductInfName = "oemnadin.inf"
;
; Software
; HKEY_LOCAL_MACHINE\SOFTWARE\Intel\CurrentVersion\NetRules
;
ProductSoftwareName	= "Wla11nd4"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\NetWLan4.sys"
NetRuleSoftwareType = "Wla11Sys ndisDriver Wla11Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """Wla11Sys"" yes no container"
NetRuleSoftwareClass = {"Wla11Driver basic"}
NetRuleSoftwareBindable = {"Wla11Driver Wla11Adapter non exclusive 100"}
;
; Hardware
; HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\n\NetRules
;
ProductHardwareName = "Wla11nd4"
ProductHardwareWla11Title = "Intel(R) PRO/Wireless LAN PC Card"
ProductHardwareWla11Description = "Intel(R) PRO/Wireless LAN PC Card"
ProductHardwareWla11PCITitle = "Intel(R) PRO/Wireless LAN PCI Card"
ProductHardwareWla11PCIDescription = "Intel(R) PRO/Wireless LAN PCI Card"
NetRuleHardwareType = "Wla11 Wla11Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"Wla11Adapter basic"}
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
;


[GeneralConstants]
;
;  Program flow control variables.
;
from = ""
to = ""
;
;  Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2

CurrentControlSet = "SYSTEM\CurrentControlSet" 
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
ProcessingMode = "0"            ; Default = 0 (Install)

INTEL_GUID		= "{5EACEC4F-FF3E-4d84-8360-59C79D0F96F8}"
INTEL_SERIALKEY = "1D43A0FCC39881E57B8030D6A6B33FE51A301717BB0BEF105B43F09C9769487C09995821D3FE16C428124E"

; Adapter Model
Wla11PCC_AdapterModel	= "PRO/Wireless 2011 LAN PC Card"
Wla11PCI_AdapterModel	= "PRO/Wireless 2011 LAN PCI Card"

TRUE = 1
FALSE = 0
NoTitle = 0

ExitState = "Active"
OldVersionExisted = $(FALSE)

DriverPath = $(!STF_NTPATH)\drivers

;*******************************************************************************
; Define Vendor/Device IDs for support adapters.  Each support adapter is listed
; in the format {<Vendor ID>, <Device ID>}.
;*******************************************************************************
[VendorDeviceIDs]
	{32902, 4162}		; 0x8086, 0x1042


[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate

;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION:   To verify that this INF deals with the same type of options
;                as we are choosing currently.
;
; INPUT:         None
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL
;                $($R1): Option Type (COMPUTER ...)
;                $($R2): Diskette description
;---------------------------------------------------------------------------

[Identify]
;
;
    read-syms Identification
    set Status = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media = #("Source Media Descriptions", 1, 1)

	set !UG_Filename = $(ProductInfName)

    Return $(Status) $(Identifier) $(Media)

;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION:   To return the option list supported by this INF and the
;                localised text list representing the options.
;
;
; INPUT:         $($0):  Language used. ( ENG | FRN | ... )
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL |
;                                STATUS_NOLANGUAGE
;                                STATUS_FAILED
;                                STATUS_NOTSUPPORTED
;
;                $($R1): Option List
;                $($R2): Option Text List
;------------------------------------------------------------------------

[ReturnOptions]

    ;
    ;
    Set Status = STATUS_FAILED
    Set OptionList = {}
    Set OptionTextList = {}

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	;
	; Check if the platforms requested is supported
	;
	ifstr(i) $($1) == ""
		goto returnoptions
	endif

	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
		goto returnoptions
	else
		Set Status = STATUS_NOTSUPPORTED
		goto finish_ReturnOptions
	endif
    else
		set Status = STATUS_NOLANGUAGE
		goto finish_ReturnOptions
    endif

    ;
    ; form a list of all the options and another of the text representing
    ;

returnoptions = +
    set OptionList = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

;------------------------------------------------------------------------
;
; InstallOption:
;
;      This section is shelled to by main installation processing
;      or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION:  To copy files representing Options
;            To configure the installed option
;            To update the registry for the installed option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;            $($2):  SourceDirectory
;            $($3):  AddCopy  (YES | NO)
;            $($4):  DoCopy   (YES | NO)
;            $($5):  DoConfig (YES | NO)
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
    Set !G:DebugOutputControl = 1
    Set !DebugOutputControl = 1
    Set !STF_DISPLAYDEBUGOUTPUT = 1
    ;
    ; Set default values for
    ;
    set Status = STATUS_FAILED
    ;
    ; extract parameters
    ;
    set Option = $($1)
    set SrcDir = $($2)
    set AddCopy = $($3)
    set DoCopy = $($4)
    set DoConfig = $($5)
    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
		Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"

    read-syms GeneralConstants
    read-syms FileConstants

    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
		set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)

    detect date

    set-title  $(FunctionTitle)

    Set AdapterCardType = "PC Card"				;set default adapter type PCMCIA
    ifstr(i) $(Option) == Wla11PCI
	Set AdapterCardType = "PCI Card"
    endif


    set to = Begin
    set from = Begin
;
;  Assume all is well.
;
    set CommonStatus = STATUS_SUCCESSFUL

    EndWait

;
;   Set up the operation-mode-based variables and gaily welcome
;   the user.  If the "install mode" variable is improperly set,
;   assume this is a new installation.
;

Begin = +
	Debug-Output $(ProductInfName)": InstallOption: Begin label Entered"

    Set ActivateDetection = FALSE

    Ifstr(i) $(!NTN_InstallMode) == deinstall
		Set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
		Set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
		Set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
		Set CommonStatus = STATUS_REBOOT
		Set ActivateDetection = TRUE
		Set StartLabel = configureadapter
		;
		;   You cannot config the software component
		;
		Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
			Debug-Output "Cannot configure the Wla11 driver software."
			Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error: cannot get an error string."
				goto ShellCodeError
			endif
			Set Error = $($R0)
			Set from = end
			Set to = end
			goto nonfatalinfo
		endif
    else
		Set ActivateDetection = TRUE
		Set StartLabel = installadapter
		Set OEM_ABANDON_OPTIONS = {}
		Set OEM_ABANDON_SOFTWARE = FALSE
		Set OEM_ABANDON_ON = TRUE
    endif


    ;===================================================
    ;  Netcard Detection logic
    ;
    ;  Initialize use of netcard detection;
    ;  Construct require global parameter variables
    ;
    Debug-Output $(ProductInfName)": =================================================="
    Debug-Output $(ProductInfName)": STF_CWDDIR is: "$(!STF_CWDDIR)
    Debug-Output $(ProductInfName)": SrcDir is: "$(SrcDir)
    Debug-Output $(ProductInfName)": STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output $(ProductInfName)": Option is: "$(Option)
    Debug-Output $(ProductInfName)": !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output $(ProductInfName)": !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output $(ProductInfName)": !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output $(ProductInfName)": !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output $(ProductInfName)": =================================================="

    Set DetectedCard = FALSE
	Set szDLLPath = $(!STF_WINDOWSSYSPATH)\NetNCPA.dll

    Ifstr(i) $(ActivateDetection) != TRUE
		goto BeginTransport
    Endif
    ;
    ;  Set !STF_NC_PARAMS and !STF_NC_PNAMES by calling
    ;    PARAM.INF!Param_BuildTypeLists.
    ;   Pass it a list of the form:
    ;
    ;   {  { <param name>,
    ;        <name of choice list var>,
    ;        <name of default var> },
    ;      ...
    ;   }
    ;

		   
    Debug-Output $(ProductInfName)": Bulding default Parm List "
   
	Set LibHand = ""			; DLL Handle

	Set FLibraryErrCtl = 1
	   
	Ifstr(i) $(!NTN_InstallMode) == "install"
		Debug-Output $(ProductInfName)" In Install mode"
		Ifstr(i) $(DoCopy) == "YES"
			Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				goto ShellCodeError
			Else-Ifstr(i) $($R0) == STATUS_FAILED
				Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
				ifint $($ShellCode) != $(!SHELL_CODE_OK)
					goto ShellCodeError
				endif
				Set Error = $($R0)
				goto fatal
			Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
				goto successful
			Endif
			Set SrcDir = $($R1)
		Endif
		Split-String $(SrcDir) "\" DirList
		Set RootDir = *($(DirList),1)
		Set szDLLPath = $(RootDir)\Win95\NetNCPA.dll
		LoadLibrary "Setup Disk #1" $(szDLLPath) LibHand
	Else-Ifstr(i) $(!NTN_InstallMode) == Update
	    LoadLibrary "x" $(szDLLPath) LibHand
	Else-Ifstr(i) $(!NTN_InstallMode) == configure
	    Debug-Output $(ProductInfName)" In Configure mode"
	    LoadLibrary "x" $(szDLLPath) LibHand
	    Debug-Output $(ProductInfName)" Just called LoadLibrary LibHand is "$(LibHand)
	Endif

contproc = +      

 	; for install get default parameters else dislay dialog and retrieve parameters
	LibraryProcedure ResultList, $(LibHand), CmdDoDialog $(AdapterCardType) $(Manufacturer)
	; Process any errors from dll
	ifstr $(ResultList) != "0"
		Debug-Output "Error returned from call to NetNCPA.dll - exiting"
		Set CommonStatus = STATUS_USERCANCEL
		FreeLibrary $(LibHand)
		Goto end
    endif

	; free dll
    ;FreeLibrary $(LibHand)

BeginTransport =+

    Debug-Output $(ProductInfName)": Install Mode = "$(!NTN_InstallMode) 
    Set from = $(fatal)
    Set to = $(fatal)

    goto $(StartLabel)

;-----------------------------------------------
; Installation Section
;-----------------------------------------------

installadapter = +

	Debug-Output $(ProductInfName)": InstallOption:  installadapter"
;
;   First, check whether the same version of the software exists
;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
		;
		; Same version already existed in the local machine
		; Popup the dialog and ask the user whether he wants to continue
		;
		CloseRegKey $(KeyProduct)

		ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
			;
			; Cannot Install the same software again
			;
			Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), $(ProductVersion)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error: cannot get an error string."
				goto ShellCodeError
			endif
			goto end
		else
			;
			; Add a new adapter card?
			;
			Shell $(UtilityInf), CardExistedDlg

			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "ShellCode error: cannot get an error string."
				goto ShellCodeError
			endif

			ifstr(i) $($R1) != "OK"
				set CommonStatus = STATUS_USERCANCEL
				goto end
			endif
			set OldVersionExisted = $(TRUE)
		endif
	endif
	goto adaptersetup

;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
;   Get the current values of all the parameters
;
configureadapter = +
	Debug-Output $(ProductInfName)": InstallOption:  configureadapter = Entered"

    Ifstr $(KeyProduct) == $(KeyNull)
		OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
		Ifstr $(KeyProduct) == $(KeyNull)
			Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
			Debug-Output "Cannot find component product key"
			goto fatalregistry
		Endif
    Endif

    ;
    ; Get the other parameters;  they're attached to the service parameters key
    ;
    Debug-Output "INF: Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "INF: FindService shell failure"
		goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
		Debug-Output "INF: FindService Shell error: "$($R0)
		goto fatalregistry
    endif

    Set KeyParameters = $($R2)

    ;
    ;  We don't need the services key, so close it.
    ;
    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
		Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
		Debug-Output "Cannot find component service"
		goto fatalregistry
    endif

    set OldVersionExisted = $(TRUE)

adaptersetup = +
	Debug-Output $(ProductInfName)": InstallOption:  adaptersetup = label Entered"

	; do this code only for PCI card
	Ifstr(i) $(AdapterCardType) == "PCI Card"
		;-----------------------------------------------------------------------
		; Find Adapter(s) by doing a PCI scan (of registry) with Utility.inf.
		; The bus/slot/function of each adapter found are returned in a list
		; of lists:{{bus0,slot0,func0},{bus1,slot1,func1},...{busN,slotN,funcN}}
		;-----------------------------------------------------------------------

		; Since multiple Vendor/DeviceIDs are supported, call GetPCIInformation
		; for each set, building the bus/slot/function list.
		Set BusDevFuncList = {}
		ForListDo ^(VendorDeviceIDs, 1)
			Shell "Utility.Inf", GetPCIInformation, *($($), 1), *($($), 2)
			ForListDo $($R0)
				Set BusDevFuncList = >($(BusDevFuncList), $($))
			EndForListDo
		EndForListDo
	
		; Check for an empty adapter list and abort with error if empty.
		IfStr $(BusDevFuncList) == {}
			Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "STATUS" +
				"No supported adapters were found in the system.  "+
				"Install the adapter in another PCI slot and try again."
			return STATUS_USERCANCEL
		EndIf

		;-----------------------------------------------------------------------
		; Search through the bus/slot/function list looking for previously
		; installed adapters that match.  A match is found by searching through
		; the installed miniport instances and matching on bus/slot.  If a match
		; is found, assume that the adapter is already setup and remove the 
		; adapter from the bus/slot/function list.
		;-----------------------------------------------------------------------

		Set NewBusDevFuncList = {}
		ForListDo $(BusDevFuncList)

			Set BusNumber = *($($), 1)
			Set SlotNumber = *($($), 2)

			Shell "Utility.Inf", IsNetCardAlreadyInstalled, $(BusNumber), +
				$(SlotNumber), "", "", "YES"
			IfStr $($R1) != "YES"
				Set NewBusDevFuncList = >($(NewBusDevFuncList), $($))
			EndIf
		EndForListDo
		Set BusDevFuncList = $(NewBusDevFuncList)

		; Check for an empty adapter list.  If the list is empty, it means that
		; all detected adapters already have a NetworkCard entry in the 
		; registry, or some rogue NetworkCard is pretending to be the software 
		; key for this adapter.  In any case, we're done.  The user can remove 
		; the rogue NetworkCard and reinstall with this software if they want.

		IfStr $(BusDevFuncList) == {}
			return STATUS_USERCANCEL
		EndIf
	EndIf

    Set from = adapteroptions


adapteroptions = +
	Debug-Output $(ProductInfName)": InstallOption:  adapteroptions = label Entered"

    read-syms FileDependentDlg$(!STF_LANGUAGE)

;***08-26-96  Greg White   commented out 
;adapterverify = +
;  Debug-Output $(ProductInfName)": InstallOption:  aqdapterverify = label Entered"
;
;    
;    Set from = adapteroptions
;    Set to = skipoptions
;    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
;    ifint $($ShellCode) != $(!SHELL_CODE_OK)
;       Debug-Output "ShellCode error: cannot get an error string."
;       goto ShellCodeError
;    endif
;    set Error = $($R0)
;    goto Warning

;
;   If installing, go create the necessary keys;
;   if configuring, they're already open.
;

skipoptions =+
	Debug-Output $(ProductInfName)": InstallOption:  skipoptions = label Entered"

    ifint $(OldVersionExisted) == $(TRUE)
		ifstr(i) $(!NTN_InstallMode) == configure
			goto writeparameters
		endif
    endif
    StartWait
    ;
    ; Add Software Component
    ;
    ifint $(OldVersionExisted) == $(FALSE)
       Debug-Output $(ProductInfName)": About to execute install Install-Option"
	   install "Install-Option"
	   ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	      Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	      ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  goto ShellCodeError
	      endif
	      set Error = $($R0)
	      goto fatal
	   endif
	endif

	Shell $(UtilityInf), AddSoftwareComponent,	$(Manufacturer), +
												$(ProductSoftwareName), +
												$(ProductSoftwareName), +
												$(ProductSoftwareTitle), +
												$(ProductInfName), +
												$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
												$(NetEventDLL)

	Set OEM_ABANDON_SOFTWARE = TRUE

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	;
	;   At this point:
	;     $R1 contains the product version key handle;
	;     $R2 contains the NetRules subkey handle;
	;     $R3 contains the new Services key handle; and
	;     $R4 contains the Parameters key
	;     $R5 contains the Linkage Key
	;
	set RegistryErrorIndex = $($R0)
	set KeyProduct = $($R1)
	Set SoftNetRulesKey = $($R2)
	CloseRegKey $($R3)
	CloseRegKey $($R4)
	CloseRegKey $($R5)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "Registry error: add software components"
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif

	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
						{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
						{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
						{EngVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductEngVersion)},+
						{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
						{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
						{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
						{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

	Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error."
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "Registry error: add value list."
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif

	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
						{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
						{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
						{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
						{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
						{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, +
						{Infname,$(NoTitle),$(!REG_VT_SZ),$(ProductInfName)}}

	Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error."
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    Debug-Output "Resgitry error: add value list."
	    goto fatalregistry
	endif
    endif
;
;   Create the HARDWARE\Netcard region and its corresponding service
;
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(ProductInfName),$(ProductKeyName)

    ifint $($R4) != -1
		Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "Cannot add hardware component"
		goto ShellCodeError
    endif

    Set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Registry error: add hardware component"
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
    endif

;
;   At this point:
;     $R1  Registry key variable for HARDWARE\Netcard\(n)
;     $R2  Registry key variable for HARDWARE\Netcard\(n)\\NetRules
;     $R3  Registry key handle for <service>\Parameters key
;     $R4  Adapter number assigned to adapter
;     $R5  Service name generated by combining svc name with adapter number
;
    Set KeyParameters = $($R3)
    Set KeyAdapterRules = $($R2)
    Set AdapterNumber = $($R4)

    Set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
						{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
						{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
						{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
						{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
						{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error"
		goto ShellCodeError
    endif

    CloseRegKey $($R1)

    Set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    Set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

    Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
						{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
						{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
						{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, +
						{Infname,$(NoTitle),$(!REG_VT_SZ),$(ProductInfName)}}

    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error."
		goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "Resgitry error: add value list."
		CloseRegKey $(KeyParameters)
		CloseRegKey $(KeyAdapterRules)
		goto fatalregistry
    endif

    CloseRegKey $(KeyAdapterRules)

    goto writeparameters
;
;   REQUIRED:   $(KeyParameters) contains service Parameters key handle
;
writeparameters = +

;
;   Add version label
;
	Ifstr(i) $(AdapterCardType) == "PCI Card"

		;-----------------------------------------------------------------------
		; For each detected adapter, create a hardware component (miniport 
		; instance).
		;-----------------------------------------------------------------------

		ForListDo $(BusDevFuncList)
	       
			; Get Bus and Slot from PCI device information
			Set BusNumber  = *($($), 1)
			Set SlotNumber = *($($), 2)

			Set NewValueList = {{CLSGUID,$(NoTitle),$(!REG_VT_SZ),$(INTEL_GUID)},+
								{SerialKey,$(NoTitle),$(!REG_VT_SZ),$(INTEL_SERIALKEY)},+
								{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
								{Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNumber)},+
								{NetType,$(NoTitle),$(!REG_VT_SZ),"WLAN"},+
								{AdapterModel,$(NoTitle),$(!REG_VT_SZ),$(Wla11PCI_AdapterModel)},+
								{Provider,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)}}
		EndForListDo
	else
		Set NewValueList = {{CLSGUID,$(NoTitle),$(!REG_VT_SZ),$(INTEL_GUID)},+
							{SerialKey,$(NoTitle),$(!REG_VT_SZ),$(INTEL_SERIALKEY)},+
							{NetType,$(NoTitle),$(!REG_VT_SZ),"WLAN"},+
							{AdapterModel,$(NoTitle),$(!REG_VT_SZ),$(Wla11PCC_AdapterModel)},+
							{Provider,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)}}
	endif

   	Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
	FlushRegKey $(KeyParameters)
	CloseRegKey $(KeyParameters)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error. (Add Value List)"
		goto ShellCodeError
    endif

; Notify NCPA to update it's stored parameters

 	;LoadLibrary "Setup Disk #1" $(szDLLPath) LibHand
	LibraryProcedure ResultList, $(LibHand), CmdWriteToRegistry $(KeyParameters)
	FreeLibrary $(LibHand)

	
	
bail_out=+
    Debug-Output "Just called AddValueList, KeyParameters"

    Set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "Registry error: Add value list"
		goto fatalregistry
    endif

    EndWait

    goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------

removeadapter = +

	Debug-Output "Remove Adapter ProductKeyName "$(ProductKeyName)
	Debug-Output "Remove Adapter NTN_RegBase "$(!NTN_RegBase)
	; remove installed files
	AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\drivers\NetWLan4.SYS"
	AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\NetNCPA.dll" 
	AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\WLANCPA.HLP" 
	AddfileToDeleteList $(!STF_WINDOWSSYSPATH)"\"$(ProductInfName)

    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		; Remove Software Component
		Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductSoftwareName)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error"
			goto ShellCodeError
		endif

		Set RegistryErrorIndex = $($R0)

		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
    else
		Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $(!NTN_RegBase)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error"
			goto ShellCodeError
		endif

		Set RegistryErrorIndex = $($R0)

		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
    endif

	goto end

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------

UpgradeSoftware = +
    ; Upgrade software component
    ;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) == $(KeyNull)
	  Debug-Output "Maximum_Allowed Key Product is NULL"
	endif

    Ifstr $(KeyProduct) != $(KeyNull)
		install "Install-Update"
		ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
			goto fatal
		endif

		; Upgrade the version number
		;
		SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
		SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
		SetRegValue $(KeyProduct) {EngVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductEngVersion)}
		SetRegValue $(KeyProduct) {SlaVersion,$(NoTitle),$(!REG_VT_SZ),$(SlaVersion)}

		;
		; do nothing for update
		;
		CloseRegKey $(KeyProduct)
		; Update Transport

		;**08-20-96** Added remove diskette reminder message     ****

		Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "STATUS" "Please remove the Intel PRO/Wireless LAN Adapter Install diskette from the diskette drive"

		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif

	else
		;
		; Cannot Open software key, goto ERROR
		;
		goto fatalregistry
    endif

	Goto end
    ;
    ; End of Upgrade Software
    ;

;
;  Escape hatches
;
successful = +
	 
	goto end


abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
		Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $($)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error"
			goto ShellCodeError
		endif

		Set RegistryErrorIndex = $($R0)

		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
		; Remove Software Component
		Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductSoftwareName), FALSE
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error"
			goto ShellCodeError
		endif

		Set RegistryErrorIndex = $($R0)

		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
    endif
    goto end

;
; warning display
;
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
		goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
		goto $(from)
    else
		goto "end"
    endif
;
; non fatal error display
;
nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
		goto $(from)
    else
		goto "end"
    endif

;
;  Registry is broken
;
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;
;  Netcard detection failure
;
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error: cannot get an error string."
		goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;
; fatal error display
;
fatal = +
    ifstr(i) $(Error) == ""
		Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
    endif

    goto setfailed
  
;
;  Shelling error
;
ShellCodeError = +
    set DlgType = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT = $(ShellCodeErrorText)
    set STF_MB_TYPE = 1
    set STF_MB_ICON = 3
    set STF_MB_DEF = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ;
    ; if OEM_ABANDON_ON == TRUE, then remove the registry entries
    ;
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
		set OEM_ABANDON_ON = FALSE
		goto abandon
    endif
    goto end

end = +
    goto term

term = +

    Return $(CommonStatus)

;***************************************************************
;  INSTALL SECTIONS
;***************************************************************


[Install-Option]
    Set STF_VITAL = ""

    Ifstr(i) $(AddCopy) == "YES"
		;
		; Add the files to the copy list
		;
		AddSectionFilesToCopyList Files-$(Option) $(RootDir)\WINNT	$(!STF_WINDOWSSYSPATH)\drivers
		AddSectionFilesToCopyList Files-ncpa $(RootDir)\Win95		$(!STF_WINDOWSSYSPATH)
		AddSectionFilesToCopyList Files-Inf $(SrcDir)				$(!STF_WINDOWSSYSPATH)
	Endif

    ifstr(i) $(DoCopy) == "YES"
       ;
       ; Copy files in the copy list
       ;
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList

    endif
    exit

[Install-Update]

	set STF_VITAL = "1"
	set STF_OVERWRITE = "ALWAYS"
	;set SrcDir = "A:\"
   
	;ClearCopyList
	;
	; Add the files to the copy list
	;
	AddSectionFilesToCopyList Files-$(Option) $(RootDir)\WINNT	$(!STF_WINDOWSSYSPATH)\drivers
	AddSectionFilesToCopyList Files-ncpa $(RootDir)\Win95		$(!STF_WINDOWSSYSPATH)
	AddSectionFilesToCopyList Files-Inf $(SrcDir)				$(!STF_WINDOWSSYSPATH)
	set !STF_NCPA_FLUSH_COPYLIST = TRUE

	CopyFilesInCopyList
	exit

;------------------------------------------------
[Source Media Descriptions]
;------------------------------------------------
; - This is a required detect section.
; - It is used to identify the disk where files are 
; kept
; - Changing this from the original version did
; not cuase the "detect error" to go away. 
;------------------------------------------------
    1 = "Intel(R) PRO/Wireless LAN  Driver Installation Disk"

;------------------------------------------------
[Signature]
;------------------------------------------------
; - This is used in an enumeration command
;------------------------------------------------
    FileType = MICROSOFT_FILE

;------------------------------------------------
[GetSignature]
;------------------------------------------------
; - Does not appear to be used.
;------------------------------------------------
    read-syms Signature
    return $(FileType)

;------------------------------------------------
[ProductType]
STF_PRODUCT = WINNT
STF_PLATFORM = I386

;------------------------------------------------
; Format: Disk Id#, Filename, Options
;------------------------------------------------
[Files-Inf]
1,oemsetup.inf, SIZE=70000, RENAME=$(ProductInfName)

;------------------------------------------------

[Files-Wla11]
1,NetWLan4.SYS,	OVERWRITE=ALWAYS,  COPY,  DESTINATION=$(!STF_WINDOWSSYSPATH)\Drivers,	SIZE=50000

[Files-ncpa] 
1,NetNCPA.dll,	OVERWRITE=ALWAYS,  COPY,  DESTINATION=$(!STF_WINDOWSSYSPATH),		SIZE=80000 
1,WLANCPA.HLP,	OVERWRITE=ALWAYS,  COPY,  DESTINATION=$(!STF_WINDOWSSYSPATH),		SIZE=50000 

[Files-Wla11PCI]
1,NetWLan4.SYS,	OVERWRITE=ALWAYS,  COPY,  DESTINATION=$(!STF_WINDOWSSYSPATH)\Drivers,	SIZE=50000

;------------------------------------------------
[LanguagesSupported]
;------------------------------------------------
; - This is used in an enumeration command
; - The languages supported by the OEM INF, 
; For every language supported we need to 
; have a separate text section for every 
; displayable text section.
;
;------------------------------------------------
    ENG

;------------------------------------------------
[OptionsTextENG]
;------------------------------------------------
; - Does not appear to be used.
; - These are text strings used to identify the 
; option to the user.  There are separate 
; sections for each language supported.  The format 
; of the section name is "OptionsText" concatenated 
; with the Language represented by the section.
;
;------------------------------------------------
    Wla11 = "Intel(R) PRO/Wireless LAN PC Card"
    Wla11PCI = "Intel(R) PRO/Wireless LAN PCI Card"

[Install-SeeIfFileIsPresent]
LibraryProcedure STATUS,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
exit

;------------------------------------------------
[FileConstantsENG]
;------------------------------------------------
; - Language-Dependent Dialog Constants
;------------------------------------------------

;--- Variables to support thermometer gauge and error dialogs
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
			   "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"

;--- Product Info
FunctionTitle = "Intel(R) PRO/Wireless LAN Card Setup"

;--- Software
ProductSoftwareTitle = "Intel(R) PRO/Wireless LAN Card Driver"
ProductSoftwareDescription = "Intel(R) PRO/Wireless LAN Card Driver"

CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."


[OemOptionFiles]
    OemFiles = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\oemnad*.inf"        
;------------------------------------------------
[DialogConstantsENG]
;------------------------------------------------
; - Does not appear to be used.
;------------------------------------------------

;--- Common button names, etc.
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"

;------------------------------------------------
[FileDependentDlgENG]
;------------------------------------------------
; - Does not appear to be used.
;------------------------------------------------

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.50