1. kds_drivers.zip Driver
2. smoem.ini File Contents

smoem.ini Driver File Contents (kds_drivers.zip)

;
; !!! for Silicon Motion OEM customers only !!!
;
; NoTV=0 means there is tv output support (default)
; NoTV=1 means there is NO tv output support
; NoRotate=0 means there is rotation mode support (default)
; NoRotate=1 means there is NO rotation mode support
; NoStretch=0 means there is stretch mode support (default)
; NoStretch=1 means there is NO stretch mode support
; TwoCRT=0 means configuration is set to LCD and CRT (default)
; TwoCRT=1 means configuration is set to CRT1 (original CRT) and CRT2 (original LCD)
; ForceDV = 0 means DualView will be available depending on running OS (default)
; ForceDV = 1 means DualView will always be available regardless of running OS
; AlpsMouse = 0 means disable ALPS_API calling
; AlpsMouse = 1 means enable ALPS_API calling (default)
; HKConfig = 0 means use default hot key configuration (default)
; HKConfig = 1 means use OEM hot key configuration (see below)
;
; For hot key configuration:
; Each hotkey has two parts: <modifier>+<virtual key code>
; Modifier: Alt=4, Ctrl=2, Shift=1
;			for example: Alt+Ctrl=6, Ctrl+Shift=3
; Virtual Key Code: 
;			for example: A=65, B=66, C=67, ...etc.
;           <note that all values are decimals>
; Also note that do NOT configure same modifier and virtual key code for 
; different hot keys.
;
;HK_LCD_Mod= modifier for hotkey <switch to LCD>
;HK_LCD_Vkc= virtual key code for hotkey <switch to LCD>
;HK_CRT_Mod= modifier for hotkey <switch to CRT>
;HK_CRT_Vkc= virtual key code for hotkey <switch to CRT>
;HK_TV_Mod=	modifier for hotkey	<switch to TV>
;HK_TV_Vkc=	virtual key code for hotkey	<switch to TV>
;HK_LCDCRT_Mod=	modifier for hotkey	<switch to LCD + CRT>
;HK_LCDCRT_Vkc=	virtual key code for hotkey	<switch to LCD + CRT>
;HK_LCDTV_Mod= modifier for hotkey <switch to LCD + TV>
;HK_LCDTV_Vkc= virtual key code for hotkey <switch to LCD + TV>
;HK_SETDA_Mod= modifier for hotkey <set DualApp>
;HK_SETDA_Vkc= virtual key code for hotkey <set DualApp>
;HK_SWAPAPP_Mod= modifier for hotkey <DualApp Swap Application>
;HK_SWAPAPP_Vkc= virtual key code for hotkey <DualApp Swap Application>
;HK_SWAPDISP_Mod= modifier for hotkey <DualApp Swap Display>
;HK_SWAPDISP_Vkc= virtual key code for hotkey <DualApp Swap Display>
;HK_SETDV_Mod= modifier for hotkey <set DualView>
;HK_SETDV_Vkc= virtual key code for hotkey <set DualView>
;HK_SETST_Mod= modifier for hotkey <set Stretch>
;HK_SETST_Vkc= virtual key code for hotkey <set Stretch>
;HK_SETVR_Mod= modifier for hotkey <set Virtual>
;HK_SETVR_Vkc= virtual key code for hotkey <set Virtual>
;HK_RT90_Mod= modifier for hotkey <Rotate 90 degree>
;HK_RT90_Vkc= virtual key code for hotkey <Rotate 90 degree>
;HK_RT180_Mod= modifier for hotkey <Rotate 180 degree>
;HK_RT180_Vkc= virtual key code for hotkey <Rotate 180 degree>
;HK_RT270_Mod= modifier for hotkey <Rotate 270 degree>
;HK_RT270_Vkc= virtual key code for hotkey <Rotate 270 degree>
;HK_SMOFF_Mod= modifier for hotkey <Turn off special mode>
;HK_SMOFF_Vkc= virtual key code for hotkey <Turn off special mode>
;
[OEM]
NoTV=1
NoRotate=1
NoStretch=0
TwoCRT=0
ForceDV=0
AlpsMouse=0
NoCRTDetect=0
HKConfig=0
HK_LCD_Mod=6
HK_LCD_Vkc=76
HK_CRT_Mod=6
HK_CRT_Vkc=67
HK_TV_Mod=6
HK_TV_Vkc=84
HK_LCDCRT_Mod=6
HK_LCDCRT_Vkc=83
HK_LCDTV_Mod=3
HK_LCDTV_Vkc=83
HK_SETDA_Mod=6
HK_SETDA_Vkc=65
HK_SWAPAPP_Mod=6
HK_SWAPAPP_Vkc=87
HK_SWAPDISP_Mod=3
HK_SWAPDISP_Vkc=87
HK_SETDV_Mod=6
HK_SETDV_Vkc=86
HK_SETST_Mod=6
HK_SETST_Vkc=75
HK_SETVR_Mod=6
HK_SETVR_Vkc=82
HK_RT90_Mod=6
HK_RT90_Vkc=219
HK_RT180_Mod=6
HK_RT180_Vkc=187
HK_RT270_Mod=6
HK_RT270_Vkc=221
HK_SMOFF_Mod=3
HK_SMOFF_Vkc=90