# Generated by UJ Circuit Analyzer # Tuesday, January 14, 2003 - 11:06:25 AM # StacSrv version 4174 # Driver version 4174 # # RJL - Added MicBiasChargeDelay to front jacks, 30 seconds (starting point). # [Models] ;all MODEL files (except perhaps STAC97.ini) should have a self-reference here. ;self-reference: PCI\VEN_8086&DEV_24D5&subsys_3005107B = this PCI\VEN_8086&DEV_24D5&subsys_12348086 = this [DelRegKeys] # Specify the registry keys to be deleted during Uninstall HKCU\Software\Sigmatel\Settings=Yes ; Delete the current user's settings subkey HKCU\Software\Sigmatel\JackSense=Yes ; Delete the current user's jacksense subkey HKCU\Software\Sigmatel\JackSense2=Yes ; Delete new user key HKLM\Software\Sigmatel\JackSense2=Yes ; both of them HKR\Settings=Yes ; Delete the driver's settings subkey HKR\JackSense=Yes ; Delete the driver's jacksense subkey # The following 2 keys cause the volume settings to be 'forgotten' during Uninstall HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes HKU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes [Apps] # Specify the application software to install TinyUJ2 = No SSWiz = No StacSysTray = YesInvisible StacIt = YesInvisible PassThru = No # The following keys are used by StacSrv.application [HKLM\Software\SigmaTel\Jacksense2] RegistryVersionNum = dword: 0x1 ; Newer registry format based on jacks, not pins PollingPeriod = dword: 333 ; 333 millliseconds JSOscFreq = dword: 16000 ; Set jacksense oscillator frequency to 16kHz DockSupport = dword: 0 ; Bios Interface dock support # Policies PolicyMicInsertSelect = dword: 1 PolicyHPMuteSpkrs = dword: 0x1FF ; Plugging in any headphones mutes all speakers #PolicyOnly1Input = dword: 0x01ff ; Front panel mic has recording precedence (RJL 10/24/03 removing) #PolicyDefaultBassMgmt = dword: 1 ; 1 = Enable 2.1 bass management at startup #PolicyOnly1Input = dword: 0x01ff ; For multiple codecs # Specify whether to route Line-Out/Front directly from Dac A or from the Analog Mixer # The JackSense registry key "DigitalModel" should always be specified and set to Dword:1 # in harmony w/ the driver setting EmulateAllMasters (binary) 01 DisableAnalogMixer = dword: 0 ; 1 = Dac A, 0 = mixer # The following keys specify the number of different setups displayed # by the Jack Sharing applet, and the mode that they support. This will # subsequently effect the menu item displayed by the Jack Sharing applet. # Typically 4 modes used are 2 (Headphones), 4 (Stereo Speakers), 5 (Quad), and 7 (5.1) # 0 = None # 1 = Mono Speaker # 2 = Headphones # 3 = Stereo Speakers (narrow) # 4 = Stereo Speakers (wide) # 5 = Quadraphonic (4 channel) # 6 = Surround (4 channel) # 7 = 5.1 Surround (6 channel) # All other values are invalid NumSpkrSetups = dword: 0x0 ; The number of setups defined. # The following sections define which pins are connected to jacks # Each pin will have properties associated with it such as the color of the jack, # where it is located, and which mode (front, rear, center/lfe) to select when a # speaker is plugged in and autoconfigure is set. # DefaultSpeakerMode specifies which channels to configure if JackSense is # active and AutoConfigure is set and speakers are plugged into the jack ################################################################################ [HKLM\Software\Sigmatel\JackSense2\Jack1] ; 0 : 0 - Front Panel Pink Jack JackColor = dword: 10 ;Pink JackLocation = dword: 1 ;Front Panel JackPanelOrder = dword: 1 ; 0 ParentCodecIndex = dword: 0 ;0 PinIndex = dword: 1 ;Pins39/41 DefaultSpeakerMode = dword: 2 ;jsPwrSpkr PinConfiguration = dword: 0 ;jsNone GpioSwitch = dword: 3 ;JackSwitch GPIO = GPIO 3 GpioMux = dword: -1 ;No GPIO Crosspoint Mux GPIOInverted = dword: 0 ; Inverted MicBias = dword: 1 ;Mic Bias GPIO = GPIO 1 MicBiasMode = dword: 0 ;Normal MicBiasPolarity = dword: 1 ;True MicBiasChargeDelay = dword: 30000 ; 30 seconds. SupportedDevices = dword: 0x7F ; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE Notify = dword: 0x1 ; - jsNone AutoConfigure = dword: 0x7F ; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE AutoConfigSupport = dword: 0x7F ; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE JSAlgorithm = dword: 1 ;jsaGood JSReadingsTotal = dword: 30 ;30 JSReadingsGood = dword: 5 ;5 DaisyChain = dword: -1 ;No Daisy Chain OutputCapSize = dword: 3 ;100 uF 25V Alum DirectConnect = dword: 1 ;True FiveOhmResistorPresent = dword: -1 ;True HasIntelFrontPanelHeader = dword: 0 ;False ImpedanceGtrThan16k = dword: 1 ;True IsDeviceSupported = dword: 0 ;False IsolatedSwitch = dword: 0 ;False NotCrossconnected = dword: 1 ;True SameCapOnBothChannels = dword: 1 ;True ################################################################################ [HKLM\Software\Sigmatel\JackSense2\Jack2] ; 0 : 1 - Front Panel Green Jack (was blue) JackColor = dword: 5 ;green (RJL 10/24/03 per DW request - was prevously blue) JackLocation = dword: 1 ;Front Panel JackPanelOrder = dword: 2 ; 1 ParentCodecIndex = dword: 0 ;0 PinIndex = dword: 0 ;Pins35/36 DefaultSpeakerMode = dword: 2 ;jsPwrSpkr PinConfiguration = dword: 0 ;jsNone GpioSwitch = dword: 2 ;JackSwitch GPIO = GPIO 2 GpioMux = dword: -1 ;No GPIO Crosspoint Mux GPIOInverted = dword: 0 ; Inverted MicBias = dword: 0 ;Mic Bias GPIO = GPIO 0 MicBiasMode = dword: 0 ;Normal MicBiasPolarity = dword: 1 ;True MicBiasChargeDelay = dword: 30000 ; 30 seconds. SupportedDevices = dword: 0x7F ; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE Notify = dword: 0x1 ; - jsNone AutoConfigure = dword: 0x6F ; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE AutoConfigSupport = dword: 0x6F ; - jsNone - jsMic - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE JSAlgorithm = dword: 1 ;jsaGood JSReadingsTotal = dword: 30 ;30 JSReadingsGood = dword: 5 ;5 DaisyChain = dword: -1 ;No Daisy Chain OutputCapSize = dword: 3 ;100 uF 25V Alum DirectConnect = dword: 1 ;True FiveOhmResistorPresent = dword: -1 ;True HasIntelFrontPanelHeader = dword: 0 ;False ImpedanceGtrThan16k = dword: 1 ;True IsDeviceSupported = dword: 0 ;False IsolatedSwitch = dword: 0 ;False NotCrossconnected = dword: 1 ;True SameCapOnBothChannels = dword: 1 ;True ################################################################################ [HKLM\Software\Sigmatel\JackSense2\Jack3] ; 0 : 2 - Rear Panel Orange Jack JackColor = dword: 3 ;Orange JackLocation = dword: 0 ;Rear Panel JackPanelOrder = dword: 3 ; 2 ParentCodecIndex = dword: 0 ;0 PinIndex = dword: 2 ;Pins43/44 DefaultSpeakerMode = dword: 6 ;jsCenterLFE PinConfiguration = dword: 6 ;jsCenterLFE GpioSwitch = dword: -1 ;JackSwitch GPIO = gpioUnassociated GpioMux = dword: -1 ;No GPIO Crosspoint Mux GPIOInverted = dword: 0x1 ; gpioUnassociated MicBias = dword: -1 ;Mic Bias GPIO = gpioUnassociated MicBiasMode = dword: 0 ;Normal MicBiasPolarity = dword: 0 ;False SupportedDevices = dword: 0x75 ; - jsNone - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE Notify = dword: 0x1 ; - jsNone AutoConfigure = dword: 0x0 ; - jsbmAllOff AutoConfigSupport = dword: 0x0 ; - jsbmAllOff JSAlgorithm = dword: 1 ;jsaGood JSReadingsTotal = dword: 30 ;30 JSReadingsGood = dword: 5 ;5 DaisyChain = dword: -1 ;No Daisy Chain OutputCapSize = dword: 2 ;3.3 Ceramic DirectConnect = dword: 1 ;True FiveOhmResistorPresent = dword: 0 ;False HasIntelFrontPanelHeader = dword: 0 ;False ImpedanceGtrThan16k = dword: 1 ;True IsDeviceSupported = dword: 0 ;False IsolatedSwitch = dword: 0 ;False NotCrossconnected = dword: 1 ;True SameCapOnBothChannels = dword: 1 ;True ################################################################################ [HKLM\Software\Sigmatel\JackSense2\Jack4] ; 0 : 3 - Rear Panel Green Jack JackColor = dword: 5 ;Green JackLocation = dword: 0 ;Rear Panel JackPanelOrder = dword: 4 ; 3 ParentCodecIndex = dword: 0 ;0 PinIndex = dword: 5 ;Pins21/22 DefaultSpeakerMode = dword: 2 ;jsPwrSpkr PinConfiguration = dword: 2 ;jsPwrSpkr GpioSwitch = dword: -1 ;JackSwitch GPIO = gpioUnassociated GpioMux = dword: -1 ;No GPIO Crosspoint Mux GPIOInverted = dword: 0x1 ; gpioUnassociated MicBias = dword: -1 ;Mic Bias GPIO = gpioUnassociated MicBiasMode = dword: 0 ;Normal MicBiasPolarity = dword: 0 ;False SupportedDevices = dword: 0x75 ; - jsNone - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE Notify = dword: 0x1 ; - jsNone AutoConfigure = dword: 0x0 ; - jsbmAllOff AutoConfigSupport = dword: 0x0 ; - jsbmAllOff JSAlgorithm = dword: 1 ;jsaGood JSReadingsTotal = dword: 30 ;30 JSReadingsGood = dword: 5 ;5 DaisyChain = dword: -1 ;No Daisy Chain OutputCapSize = dword: 2 ;3.3 Ceramic DirectConnect = dword: 1 ;True FiveOhmResistorPresent = dword: 0 ;False HasIntelFrontPanelHeader = dword: 0 ;False ImpedanceGtrThan16k = dword: 1 ;True IsDeviceSupported = dword: 0 ;False IsolatedSwitch = dword: 0 ;False NotCrossconnected = dword: 1 ;True SameCapOnBothChannels = dword: 1 ;True ################################################################################ [HKLM\Software\Sigmatel\JackSense2\Jack5] ; 0 : 4 - Rear Panel Black Jack JackColor = dword: 0 ;Black JackLocation = dword: 0 ;Rear Panel JackPanelOrder = dword: 5 ; 4 ParentCodecIndex = dword: 0 ;0 PinIndex = dword: 7 ;Pins23/24 DefaultSpeakerMode = dword: 5 ;jsSurround PinConfiguration = dword: 5 ;jsSurround GpioSwitch = dword: -1 ;JackSwitch GPIO = gpioUnassociated GpioMux = dword: -1 ;No GPIO Crosspoint Mux GPIOInverted = dword: 0x1 ; gpioUnassociated MicBias = dword: -1 ;Mic Bias GPIO = gpioUnassociated MicBiasMode = dword: 0 ;Normal MicBiasPolarity = dword: 0 ;False SupportedDevices = dword: 0x75 ; - jsNone - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE Notify = dword: 0x1 ; - jsNone AutoConfigure = dword: 0x0 ; - jsbmAllOff AutoConfigSupport = dword: 0x0 ; - jsbmAllOff JSAlgorithm = dword: 1 ;jsaGood JSReadingsTotal = dword: 30 ;30 JSReadingsGood = dword: 5 ;5 DaisyChain = dword: -1 ;No Daisy Chain OutputCapSize = dword: 2 ;3.3 Ceramic DirectConnect = dword: 1 ;True FiveOhmResistorPresent = dword: 0 ;False HasIntelFrontPanelHeader = dword: 0 ;False ImpedanceGtrThan16k = dword: 1 ;True IsDeviceSupported = dword: 0 ;False IsolatedSwitch = dword: 0 ;False NotCrossconnected = dword: 1 ;True SameCapOnBothChannels = dword: 1 ;True ################################################################################ [HKLM\Software\Sigmatel\JackSense2\Jack6] ; 0 : 5 - Rear Panel Pink Jack lPriority = dword: 0 ;default mic JackColor = dword: 10 ;Pink JackLocation = dword: 0 ;Rear Panel JackPanelOrder = dword: 6 ; 5 ParentCodecIndex = dword: 0 ;0 PinIndex = dword: 6 ;Pins16/17 DefaultSpeakerMode = dword: 2 ;jsPwrSpkr PinConfiguration = dword: 1 ;jsMic GpioSwitch = dword: -1 ;JackSwitch GPIO = gpioUnassociated GpioMux = dword: -1 ;No GPIO Crosspoint Mux GPIOInverted = dword: 0x1 ; gpioUnassociated MicBias = dword: -1 ;Mic Bias GPIO = gpioUnassociated MicBiasMode = dword: 2 ;Hardwired MicBiasPolarity = dword: 0 ;False SupportedDevices = dword: 0x12 ; - jsLineIn - jsMic Notify = dword: 0x0 ; - jsbmAllOff AutoConfigure = dword: 0x0 ; - jsbmAllOff AutoConfigSupport = dword: 0x0 ; - jsbmAllOff JSAlgorithm = dword: 1 ;jsaGood JSReadingsTotal = dword: 30 ;30 JSReadingsGood = dword: 5 ;5 DaisyChain = dword: -1 ;No Daisy Chain OutputCapSize = dword: 2 ;3.3 Ceramic DirectConnect = dword: 1 ;True FiveOhmResistorPresent = dword: 0 ;False HasIntelFrontPanelHeader = dword: 0 ;False ImpedanceGtrThan16k = dword: 1 ;True IsDeviceSupported = dword: 0 ;False IsolatedSwitch = dword: 0 ;False NotCrossconnected = dword: 1 ;True SameCapOnBothChannels = dword: 1 ;True ################################################################################ [HKLM\Software\Sigmatel\JackSense2\Jack7] ; 0 : 6 - Rear Panel Blue Aux Jack # JackColor = dword: 6 ; Blue JackLocation = dword: 0 ; Rear Panel JackPanelOrder = dword: 7 ; # 6 ParentCodecIndex = dword: 0 ; Codec 0 PinIndex = dword: 10 ; Pins16/17 PinConfiguration = dword: 9 ; jsAux # SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow: SupportedDevices = dword: 0x0200 ; - jsbmAux [HKR\Settings] EmulateAllMasters = hex: 1 DigitalMasterControlsAnalog = hex: 1 DockedIfJustCodecReady = hex: 0 EnableLinearVolumes = hex: 0 MakeCodecsPlayInParallel = hex: 0 DisableCDIn = hex: 0 MuteInactiveDac = hex: 0 SPDIFInMute = hex: 0 SPDIFInSharesJackWithAnalogIn = hex: 0 DisableHeadphone = hex: 1 DisableLnlvl = hex: 1 DisableWaveIn2 = hex: 1 DisablePCBeep = hex: 1 DisablePhone = hex: 0 DisableMonoOut = hex: 1 DisableAux = hex: 0 DisableVideo = hex: 1 Disable3DControl = hex: 1 DisableMonoVirtual = hex: 1 DisableMICSelect = hex: 1 DisableLineInFromPlayback = hex: 0 DisableMicFromPlayback = hex: 0 DisablePeakmeters = hex: 1 EnableSPDIFIn = hex: 1 MICBoost = hex: 1 MasterControlsAux = hex: 0 MasterControlsMono = hex: 0 RecMuxMuteAtFloor = hex: 0 MICSelect = hex: 0 3DDepthEnable = hex: 0 PCBeepMute = hex: 1 PhoneMute = hex: 1 CDMute = hex: 1 VideoMute = hex: 1 AuxMute = hex: 1 EnableExtAmpControl = hex: 0 EnableNonPCMOnWin2K = hex: 1 EnableStereoMic = hex: 0 MultiChannelEnable = hex: 1 EnableNewVolumeControls = hex: 1 DisableStereoVirtual = hex: 0 DisableMono2Virtual = hex: 1 DisableStereo2Virtual = hex: 1 # These settings control the values loaded into the AC97 registers by the driver. # This allows setting the configuration prior to any applets running. ####################################################### # the following settings setup 2 channel plus Mic and # Line-In on the system, plus 6 channel on the dock. # Be careful with R6E. Only 1 codec can be inputting # at a time. Setting the off codec to slots 6-9 will # effectively disable it. ####################################################### 0_76588384_R3E = hex: 01, 00 ; R3E=0x0001 0_76588384_R4C = hex: 0C, 00 ; R4C=0x000C 0_76588384_R4E = hex: FC, FF ; R4E=0xFFFC 0_76588384_R54 = hex: 00, 00 ; R54=0x0000 0_76588384_R64 = hex: 58, C0 ; R64=0xC05E 0_76588384_R66 = hex: 06, 06 ; R66=0x0606 0_76588384_R68 = hex: 60, 08 ; R68=0x0860 0_76588384_R6E = hex: 40, 90 ; R6E=0x9040 0_76588384_R74 = hex: 00, 08 ; R74=0x0800 BiosInterfaceAddress = dword: 0x0 ; address in physical memory BiosInterfaceAddressEnd = dword: 0x0 ; address in physical memory ############################################################ #The following settings must be hand-edited in the INI file ############################################################ # This SPDIFSharedPinMuxBIts value is required when we have SPDIF OUT on the same jack as any analog inputs/outputs (LINE IN, REAR etc.). # When user enables SPDIF OUT driver uses this mask to check if this jack is configured as analog input or output # and if it is it will remember that SPDIF OUT is on but actually won't turn it on until this jack is reconfigured # as digital input/output. Digital input/output means that this jack is turned off in reg 64 and is not selected as # input source in reg 66. # Last three bits are shared pin mux bits from register 66 # In all higher bits the 1 should be provided at position of the bit that powers shared pin in reg. 64. # Below we have bit 15 set, which powers pin43/44 and 5 is mux value of pin 43/44 in reg66. # SPDIFSharedPinMuxBits =DWORD:0x0042 ; pin 23/24 is shared with SPDIF on PA1 PCMVolumeFixedLevel = hex: 08, 08 ; only meaningful in analog or DigitalMasterControlsAnalog mode WaveInMux = hex: 00, 00, 00, 00 ; normally Mic # Volume units are represented in fixed point hexadecimal, # in the same units that the OS passes to the driver. # [ADC Gain] [Output volume] [Input Volume] # [Reg 0x1C] [Regs 2,4,6,36,38] [Regs A,C,E,10,12,14,16,18] # +22.5 dB 16.8000h = 0x00168000 max slider # +12 dB = 0C.0000h = 0x000C0000 1/4 slider max slider # +06 dB = 06.0000h = 0x00060000 1/2 slider # 0 dB = 00.0000h = 0x00000000 min slider max slider 1/4 slider # -0.5 dB = FFFF.8000h = 0xFFFF8000 # -1 dB = FFFF.0000h = 0xFFFF0000 # -6 dB = FFFA.0000h = 0xFFFF0000 1/2 slider 1/8 slider # -12 dB = FFFA.0000h = 0xFFFF0000 1/4 slider 1/16 slider # -18 dB = FFFA.0000h = 0xFFFF0000 1/8 slider #-35.5 dB = FFDD.8000h = 0xFFDD8000 min slider # -46 dB = FFD2.0000h = 0xFFD20000 min slider MICAtRecMuxVolume = hex: 63, D0, 13, 00 ; (0-168000) MICVolume = hex: 90, 56, 08, 00 ; (ffdd8000-c0000), (5 bit control). MasterVolume = hex: 00, 00, FA, FF ; 50% CDVolume = hex: 89, F5, FF, FF ; (ffdd8000-c0000), (5 bit controls). #DockCodecID = dword: 0x0 #SPDIFSharedPinMuxBIts = hex: 0 SPDIFInSupportVariant = hex: 1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.