; ; EchoFlashUpdate command file ; ; ; Normally, EchoFlashUpdate loads EchoFlashList.txt as the command file. ; To specify an alternate command file, put it as the first command line ; parameter: ; ; EchoFlashUpdate someothercmdfile.txt ; ; ; Any line that starts with a semicolon at the start of the file is ; ignored. ; ; ; Parameters: ; ; Vendor ID in hex ; Product ID in hex ; Number of images in decimal (up to 5) ; Display name for first image ; .DAT file name for first image ; Display name for 2nd image ; .DAT file name for 2nd image ; ...etcetera ; ; All the DAT files must be in the same folder as EchoFlashUpdate.exe. ; ; Vendor IDs: ; Echo 0x001486 ; Loud 0x000FF2 ; ; Hardware IDs: ; AudioFire8 0xAF8 ; AudioFire12 0xAF12 ; Onyx 400F 0x400F ; ; If either the vendor ID or the hardware ID is 0xFFFFFFFF, ; then that ID is ignored. ; 0xffffffff 0xffffffff 6 ARM code FireworksARM.dat ARM backup code FireworksARM_E.dat DSP code audiofire12.dat DSP backup code audiofire12_e.dat Boot loader bootstrap.dat Session eraser killsession.datDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.