P865D_ANALOG_DRIVER.INI Driver File Contents (AUDIO_XP_2K_040426.zip)

# Generated by UJ Circuit Analyzer
# Friday, August 29, 2003 - 6:10:39 PM
# StacSrv version 4158
# Driver version 4158

[Models]
;all MODEL files (except perhaps STAC97.ini) should have a self-reference here.
;self-reference:
#MANUAL EDIT: Change ID number to proper value
PCI\VEN_8086&DEV_24D5&subsys_2017107B= this


[DelRegKeys]
# Specify the registry keys to be deleted during Uninstall
HKCU\Software\Sigmatel\Settings=Yes    ; Delete the current user's settings subkey
HKCU\Software\Sigmatel\JackSense=Yes   ; Delete the current user's jacksense subkey
HKCU\Software\Sigmatel\JackSense2=Yes  ; Delete new user key
HKLM\Software\Sigmatel\JackSense2=Yes  ; both of them
HKR\Settings=Yes                       ; Delete the driver's settings subkey
HKR\JackSense=Yes                      ; Delete the driver's jacksense subkey

# The following 2 keys cause the volume settings to be 'forgotten' during Uninstall
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes
HKU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes

[Apps]
# Specify the application software to install
TinyUJ2 = No
SSWiz = NO
StacSysTray = NO
StacIt = NO
PassThru = NO

# The following keys are used by StacSrv.application
[HKLM\Software\SigmaTel\Jacksense2]
RegistryVersionNum   = dword: 0x1     ; Newer registry format based on jacks, not pins
PollingPeriod        = dword: 333     ; 333 millliseconds
JSOscFreq            = dword: 16000   ; Set jacksense oscillator frequency to 16kHz
DockSupport          = dword: 0   ; Bios Interface dock support

# Policies
##Manual Edit: Policy Disabled
PolicyHPMuteSpkrs      = dword: 0x01ff    ; Plugging in any headphones mutes all speakers
PolicySpkrMuteSpkrs    = dword: 0x0032

# Specify whether to route Line-Out/Front directly from Dac A or from the Analog Mixer
# The JackSense registry key “DigitalModel” should always be specified and set to Dword:1 
# in harmony w/ the driver setting EmulateAllMasters (binary) 01

DisableAnalogMixer   = dword: 0     ; 1 = Dac A, 0 = mixer

# The following keys specify the number of different setups displayed
# by the Jack Sharing applet, and the mode that they support.  This will
# subsequently effect the menu item displayed by the Jack Sharing applet.
# Typically 4 modes used are 2 (Headphones), 4 (Stereo Speakers), 5 (Quad), and 7 (5.1)

#    0 = None
#    1 = Mono Speaker
#    2 = Headphones
#    3 = Stereo Speakers (narrow)
#    4 = Stereo Speakers (wide)
#    5 = Quadraphonic (4 channel)
#    6 = Surround (4 channel)
#    7 = 5.1 Surround (6 channel)
#    All other values are invalid

NumSpkrSetups     = dword: 0x0000   ; The number of setups defined.

# The following sections define which pins are connected to jacks
# Each pin will have properties associated with it such as the color of the jack,
# where it is located, and which mode (front, rear, center/lfe) to select when a
# speaker is plugged in and autoconfigure is set.

# DefaultSpeakerMode specifies which channels to configure if JackSense is
#  active and AutoConfigure is set and speakers are plugged into the jack

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack1]	 ;  0 : 0 - Front Panel Green Jack
#   
JackColor                = dword: 5		 ; Green
JackLocation             = dword: 1		 ; Front Panel
JackPanelOrder           = dword: 1		 ; # 0
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 0		 ; Pins35/36
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: -1		 ; jsUnknown
GpioSwitch               = dword: -1		 ; JackSwitch GPIO = gpioUnassociated
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0x1		 ; gpioUnassociated

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x006D	 ;   - jsNone - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

# Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: 0		 ;    Jack closest to Codec
OutputCapSize            = dword: 3		 ;    100 uF 25V Alum
DirectConnect            = dword: -1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: -1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack2]	 ;  0 : 1 - Front Panel Pink Jack
#   
JackColor                = dword: 10		 ; Pink
JackLocation             = dword: 1		 ; Front Panel
JackPanelOrder           = dword: 2		 ; # 1
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 1		 ; Pins39/41
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: -1		 ; jsUnknown
GpioSwitch               = dword: -1		 ; JackSwitch GPIO = gpioUnassociated
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0x1		 ; gpioUnassociated

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x006D	 ;   - jsNone - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

# Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 3		 ;    100 uF 25V Alum
DirectConnect            = dword: -1		 ;    True
FiveOhmResistorPresent   = dword: -1		 ;    True
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: -1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack3]	 ;  0 : 2 - Rear Panel Blue Jack
#   
JackColor                = dword: 6		 ; Blue
JackLocation             = dword: 0		 ; Rear Panel
JackPanelOrder           = dword: 3		 ; # 2
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 7		 ; Pins23/24
DefaultSpeakerMode       = dword: 5		 ; jsSurround
PinConfiguration         = dword: -1		 ; jsUnknown
GpioSwitch               = dword: -1		 ; JackSwitch GPIO = gpioUnassociated
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0x1		 ; gpioUnassociated

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0065	 ;   - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

# Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: -1		 ;    True
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack4]	 ;  0 : 3 - Rear Panel Green Jack
#   
JackColor                = dword: 5		 ; Green
JackLocation             = dword: 0		 ; Rear Panel
JackPanelOrder           = dword: 4		 ; # 3
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 0		 ; Pins35/36
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: -1		 ; jsUnknown
GpioSwitch               = dword: -1		 ; JackSwitch GPIO = gpioUnassociated
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0x1		 ; gpioUnassociated

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x006D	 ;   - jsNone - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

# Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: 1		 ;    Jack further from codec
OutputCapSize            = dword: 3		 ;    100 uF 25V Alum
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack5]	 ;  0 : 4 - Rear Panel Pink Jack
#   
JackColor                = dword: 10		 ; Pink
JackLocation             = dword: 0		 ; Rear Panel
JackPanelOrder           = dword: 5		 ; # 4
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 2		 ; Pins43/44
DefaultSpeakerMode       = dword: 6		 ; jsCenterLFE
PinConfiguration         = dword: 6		 ; jsCenterLFE
GpioSwitch               = dword: -1		 ; JackSwitch GPIO = gpioUnassociated
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0x1		 ; gpioUnassociated

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0065	 ;   - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

# Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: -1		 ;    True
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack6]	 ;  0 : 5 - Internal Amp
#   
JackColor                = dword: 0		 ; Black
JackLocation             = dword: 2		 ; Internal Amp
JackPanelOrder           = dword: 6		 ; # 5
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 5		 ; Pins21/22
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: -1		 ; jsUnknown
GpioSwitch               = dword: -1		 ; JackSwitch GPIO = gpioUnassociated
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0x1		 ; gpioUnassociated

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0004	 ;   - jsPwrSpkr
Notify                   = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

# Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

[HKR\Settings]

EmulateAllMasters = hex: 1
DigitalMasterControlsAnalog = hex: 0
DockedIfJustCodecReady = hex: 0
EnableLinearVolumes = hex: 0
MakeCodecsPlayInParallel = hex: 0
DisableCDIn = hex: 0
MuteInactiveDac = hex: 0
SPDIFInMute = hex: 0
SPDIFInSharesJackWithAnalogIn = hex: 0
DisableHeadphone = hex: 1
DisableLnlvl = hex: 0
DisableWaveIn2 = hex: 1
DisablePCBeep = hex: 0
DisablePhone = hex: 0
SPDIFInSupportVariant = hex: 0
DisableMonoOut = hex: 1
DisableAux = hex: 1
DisableVideo = hex: 1
Disable3DControl = hex: 1
DisableMonoVirtual = hex: 1
DisableMICSelect = hex: 0
DisableLineInFromPlayback = hex: 0	; RJL 9/22/03 was 1
DisableMicFromPlayback = hex: 0
DisablePeakmeters = hex: 1
EnableSPDIFIn = hex: 0
MICBoost = hex: 1
MasterControlsAux = hex: 0
MasterControlsMono = hex: 0
RecMuxMuteAtFloor = hex: 0
MICSelect = hex: 0
3DDepthEnable = hex: 0
PCBeepMute = hex: 0			; RJL 9/22/03 was 1
PhoneMute = hex: 1
CDMute = hex: 1
VideoMute = hex: 1
AuxMute = hex: 1
EnableExtAmpControl = hex: 0
EnableNonPCMOnWin2K = hex: 1
EnableStereoMic = hex: 0
MultichannelEnabledByUser = hex: 0
EnableNewVolumeControls = hex: 1

SPDIFOutputDisable = hex: 1
DisableSPDIFControl = hex: 1

LineInMute		= hex: 1	; 0, unmuted, 1 muted RJL - Added 9/22/03

##Hand Edits for New Keys Follow
CodecPinsMuteMask = dword: 8
GPIOActions = hex: 04, 00, 06, 01, 04, 05, 06, 01
MultiChannelDisable = hex: 1
EnableAltMicSupport= hex: 1
Mic1Selector = hex: 04
Mic2Selector = hex: 05

# These settings control the values loaded into the AC97 registers by the driver.
# This allows setting the configuration prior to any applets running.

#######################################################
# the following settings setup 2 channel plus Mic and
# Line-In on the system, plus 6 channel on the dock.
# Be careful with R6E.  Only 1 codec can be inputting
# at a time.  Setting the off codec to slots 6-9 will
# effectively disable it.
#######################################################

0_76588384_R3E      = hex: 01, 00    ; R3E = 0x0001
0_76588384_R4C      = hex: 00, 00    ; R4C = 0x0000
0_76588384_R4E      = hex: F0, FF    ; R4E = 0xFFF0
0_76588384_R54      = hex: 0B, 00    ; R54 = 0x000B
0_76588384_R64      = hex: 8E, 63    ; R64 = 0x638E
0_76588384_R66      = hex: 04, 02    ; R66 = 0x0204
0_76588384_R68      = hex: 01, 21    ; R68 = 0x2101
0_76588384_R6E      = hex: 40, 50    ; R6E = 0x5040 (VREF output off to powerup internal amp)
0_76588384_R74      = hex: 00, 88    ; R74 = 0x8800 (EAPD On for Stereo output)

BiosInterfaceAddress      = dword: 0x000F0000	 ; address in physical memory
BiosInterfaceAddressEnd   = dword: 0x000FFFFF	 ; address in physical memory

############################################################
#The following settings must be hand-edited in the INI file
############################################################

PCMVolumeFixedLevel       = hex: 08, 08   ; only meaningful in analog or DigitalMasterControlsAnalog mode
WaveInMux          = hex: 00, 00, 00, 00  ; normally Mic

#    Volume units are represented in fixed point hexadecimal, 
#    in the same units that the OS passes to the driver.
#                                        [ADC Gain]      [Output volume]             [Input Volume]
#                                        [Reg 0x1C]      [Regs 2,4,6,36,38]    [Regs A,C,E,10,12,14,16,18]
#  +22.5 dB   16.8000h = 0x00168000   max slider                                              
#  +12 dB =   0C.0000h = 0x000C0000   1/4 slider                                  max slider
#  +06 dB =   06.0000h = 0x00060000                                               1/2 slider
#    0 dB =   00.0000h = 0x00000000   min slider         max slider               1/4 slider
# -0.5 dB = FFFF.8000h = 0xFFFF8000
#   -1 dB = FFFF.0000h = 0xFFFF0000
#   -6 dB = FFFA.0000h = 0xFFFF0000                      1/2 slider               1/8 slider
#  -12 dB = FFFA.0000h = 0xFFFF0000                      1/4 slider               1/16 slider
#  -18 dB = FFFA.0000h = 0xFFFF0000                      1/8 slider
#-35.5 dB = FFDD.8000h = 0xFFDD8000                                               min slider
#  -46 dB = FFD2.0000h = 0xFFD20000                      min slider

MICAtRecMuxVolume  = hex: 00, 01, 00, 00  ; (0-168000)
MICVolume          = hex: FF, D2, 00, 00  ; (ffdd8000-c0000), (5 bit control).
CDVolume           = hex: FF, D2, 00, 00  ; (ffdd8000-c0000), (5 bit controls).
MasterVolume       = hex: 00, 00, fa, ff  ; (ffd18000-0), (5 bit controls).	RJL 10/22/03 Set volume to 50%

# Other settings
GPIPinsMuteMask = dword: 0x0200
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.47