1. At-2000.zip Driver
2. README File Contents

README Driver File Contents (At-2000.zip)

****************************************************************************
*                                                                          *
*                       ATI AT-2000PNP Ethernet Card                       *
*                                                                          *
*                    NDIS Driver for Windows NT v3.1/v3.5                  *
*                                                                          *
*                                 Ver. 3.00                                *
*                                                                          *
*                                README file                               *
*                                                                         *
*                                                                          *
****************************************************************************

1. Introduction:

   This Ethernet NDIS driver conforms to Microsoft LAN Manager Network
   Driver Interface Specification (NDIS) Version 3.0, supporting Microsoft
   Windows NT v3.1 and v3.5 environments.  The driver and the related file
   are located in the directory \NT31 or \NT35 of the shipped disk.


2. Contents of the Subdirectory:

      PNPND.SYS       The NDIS3 driver.

      OEMSETUP.INF    A setup-information file for installing the Ethernet
                      NDIS driver under Windows NT.


3. Installation

   1) If Windows NT operating system is being installed, select other
      manufacturers from the network adapter card options and skip to
      step 6 to continue.

   2) If Windows NT operating system has been installed, logon as Admi-
      nistrator and select Netwrok icon from the control panel.

   3) Select the "Add Adapter" button from the Network window.

   4) When network adapter choices appear, select "<other> Require disk
      from manufacturer" from the menu, and then select the "Continue"
      button.

   5) Insert the Ethernet Driver Disk to any floppy drive.

   6) Follow the instructions on the screen and select the appropriate
      drive where the driver diskette is located (e.g., A:\NT31 or
      B:\NT31) when asked to give the source for the driver.  If you
      are asked to speceify the node number of the card, do one of the
      the following:

      - if there is one card on the system, select the "Skip" button
        to continue the installation;

      - if there are several cards on the system, specify the node
        number of the card.  (If you do not know the number, you can
        use the diagnostic program -- DIAG.EXE -- in this diskette
        to find out.)

   7) Also select the appropriate hardware settings for the ATI AT-2000PNP
      Ethernet Card.

   8) Select OK from the Network window.

   9) Restart your system.