Winbond W89C940 Boot ROM Program (ver 1.01) (note : rboot.rom Feb 26, 1996 11:05 AM) (A) How to use OEM.EXE ? (a) OEM.EXE and RBOOT.ROM should be put in the same directory. (b) OEM.EXE is executed.(no parameters is necessary) --> the program will ask user to input vendor ID and device ID. (c) The steps that is mentioned above is followed, vendor ID and device ID in the program will be modified. (B) After vendor ID and device ID are modified, RBOOT.ROM should be burned into a PROM. This RBOOT.ROM size is 16K. If user uses 64K PROM, you should duplicate the same 3 copies RBOOT.ROM file and combine these files.(i.e.: 16k * 4 contents will be burned into a PROM.) <method> : copy RBOOT.ROM /b + RBOOT.ROM /b + RBOOT.ROM /b + RBOOT.ROM /b CCC (note : CCC file size will be 64K) (C) Vendor ID and device ID of EEPROM in the LAN card should be the same as vendor ID and device ID in the program.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.