README.TXT Driver File Contents (npci.zip)

Sun PC-NFS
----------

The PCI Ethernet Card's NDIS 2.01 driver can also be used with the Sun PC-NFS
(version 5.x) environment.


Follow the steps listed below:

1       Be sure PC-NFS is installed on your system and configured for an NDIS
        2.01 driver. See the PC-NFS Installation Procedure Manuals for more
        information.

2       Run "NFSCONF". Select "Adapter" Menu. Select "Ethernet". Select "NDIS".

3       Insert the PC-NFS QUIKNDIS diskette into the floppy drive. Change to
        the drive containing the QUIKNDIS diskette (e.g., "A:\").

4       At the prompt type:

                QUIKNDIS

        Then press <Enter>.

5       A message will appear asking for the current boot drive. Enter the
        current boot drive and then press <Enter>.

6       Press "Y" to save the current "PROTOCOL.INI" file as "PROTOCOL.OLD".
        Ignore this step if this dialog box does not appear.

7       In the "Adapter Card List" box, select the "Custom" option to install
        the PCI Ethernet Card's NDIS driver for PC-NFS.

8       Remove the QUIKNDIS disk from the floppy drive. Insert the PCI Ethernet
        Card's driver diskette into the floppy drive.

9       Follow the dialog boxes and enter the correct driver and path on the
        PCI Ethernet Card's driver diskette to install the NDIS driver
        (e.g., "A:\NDIS.DOS\").

10      Enter "PCIND" for the NIF file name and then press <Enter>.

11      Make the appropriate changes to "CONFIG.SYS" and "AUTOEXEC.BAT".

12      Reboot your system.

        The installation of the NDIS 2.01 driver for PC-NFS is now complete.



-------------------------------------[END]--------------------------------------

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.23