******************************IMPORTANT!********************************* This is a legal agreement between you and Canon Inc. ("Canon") and governing your use of the software stored in the CD-ROM, Driver and application software for Canon Printing Devices (the "Software"). READ CAREFULLY THIS AGREEMENT BEFORE INSTALLING THE SOFTWARE. IF YOU DO NOT AGREE TO THE FOLLOWING TERMS AND CONDITIONS, DO NOT INSTALL, COPY OR USE THE SOFTWARE, AND PROMPTLY DESTROY IT: 1. GRANT OF LICENSE Canon grants you a personal, limited and non-exclusive license to install and use only for the use with Canon's Printing Devices (the "Printing Devices") the Software only on a single computer directly or via local area network connected to the Printing Devices (the "Designated Computer"). You may allow other users of other computers connected to the local area network in which your Designated Computer is contained (the "LAN Users") to use the Software, provided that you must assure that all such users shall abide by the terms of this agreement and shall be subject to restrictions and obligations borne by you hereunder. 2. OTHER RESTRICTIONS You may not install or use the Software on any hardware configuration where the Software is accessible from any users other than the LAN Users. You may not assign, sublicense, sell, rent, lease, loan, convey or transfer to any third party, or send or bring the Software out of the country where you originally obtained it to other countries without required authorization of applicable governments, or copy, duplicate, translate or convert to another programming language the Software, except as expressly provided herein. You may not alter, modify, disassemble, decompile or otherwise reverse engineer the Software and you may not have any third party to do so. 3. COPYRIGHT NOTICE You may not modify, remove or delete a copyright notice of Canon and its licensors contained in the Software, including any copy thereof. 4. NO SUPPORT CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, DEALERS AND/OR CANON'S LICENSORS ARE NOT RESPONSIBLE FOR MAINTAINING OR HELPING YOU TO USE THE SOFTWARE. NO UPDATES, FIXES OR SUPPORTS WILL BE MADE AVAILABLE FOR THE SOFTWARE. 5. NO WARRANTY AND DISCLAIMER OF INDEMNITY Canon, Canon's subsidiaries, their distributors, dealers and/or Canon's licensors will not guarantee uninterrupted service, or absence or correction of errors. Therefore, the Software is licensed on an "AS IS" basis without warranty of any kind. CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, DEALERS AND/OR CANON'S LICENSORS DISCLAIM ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. NEITHER CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, DEALERS NOR CANON'S LICENSORS ARE LIABLE FOR ANY LOSS OR DAMAGE INCLUDING CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE SUCH AS LOSS OF PROFITS, EXPENSE OR INCONVENIENCE, WHATSOEVER CAUSED BY OR ARISING OUT OF THE SOFTWARE OR THE USE THEREOF. CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, DEALERS AND/OR CANON'S LICENSORS SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY ANY THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY. 6. TERM The license granted hereunder is effective upon your acceptance hereof by installing the Software and remains in effect until terminated. You may terminate the license by destroying the Software and all copies thereof, including those as used and/or installed by LAN Users. The license granted hereunder will also terminate if you or other LAN Users fail to comply with any term hereof. Upon termination of the license, in addition to Canon enforcing its respective legal rights, you and LAN Users must then promptly destroy the Software and any copy thereof. 7. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein. 8. SEVERABILITY In the event that any provision hereof is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions hereof shall remain in full force and effect. 9. ACKNOWLEDGEMENT BY INSTALLING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORISED REPRESENTATIVE OF CANON. Should you have any questions concerning this Agreement, or if you desire to contact Canon for any reason, please write to Canon's sales subsidiary or distributor/dealer, serving the country where you obtained this Software. ************************************************************************** Copyright (c) 1999-2001 Canon, Inc. Windows(R) 95/98/Me/NT 4.0/2000/XP Fax Driver - Version 1.50 ************************************************************************** This README file contains supplemental information to help you install and use your fax driver software with Microsoft(R) Windows(R) 95, Windows 98, Windows(R) Me, Windows NT(R) 4.0, Windows 2000 and Windows XP. As with most software and hardware products, some information is made available after the development of the manual. Updated information regarding this driver software is provided in this README file. If you require additional assistance, please contact your local Canon company. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. CONTENTS ======== Overview System Requirements Installing the Fax Driver i Accessing Help Information Cautions, Limitations and Restrictions Overview ======== This fax driver allows you to send a fax from any Windows 95/98/Me/NT4.0/2000 /XP application to a remote fax machine if your machine contains an optional fax board. System Requirements =================== The Canon Fax Driver does not require any additional system configuration beyond those required to run Windows 95/98/Me/NT4.0/2000 /XP. However, at least one of the following output ports is required: - parallel printer port (LPT1, LPT2, etc.) - network interface Installing the Fax Driver ========================== To use this fax driver with software applications that operate with Microsoft Windows 95/98/Me/NT4.0/2000/XP, use the following installation procedure. To install using the Installer: 1. Insert the Driver Software CD-ROM into the CD-ROM drive. 2. Double-click the My Computer icon, and then double-click the CD-ROM drive icon. 3. Double-click the Fax, Drivers, us_eng, and faxsetup folder icons, and then double-click the Setup.exe icon to start the installation process. 4. In the first dialog box of the Fax Driver Setup Wizard, click the Next button, and then follow the instructions on the screen. 5. Click the Add/Delete button to select the driver you want to install. 6. Select the driver you want to install from the Fax List in the Add/ Delete Faxes for Driver Installation dialog box. Then click the Add to the Fax List for Driver Installation button. 7. Click the OK button in the Add/Delete Faxes for Driver Installation dialog box. 8. Check that the driver you want to install is selected in the Fax Driver Setup Wizard dialog box. Then click the Next button. 9. Select the printer port name from the Port drop-down list box. If the fax is connected to the network, click the Browse for Printer button, and then select the network printer in the Browse for Printer dialog box. Then click the Next button. 10.In the next dialog box, check the installation settings, and then click the Next button. 11.A message asking if you want to install NetSpot Suite Service is displayed. Click the Yes button to install NetSpot Suite Service together with the printer driver. 12.After the files are copied, click the Finish button to finish the installation program. You are now ready to send a fax from any Windows software application. Note: * Use the Installer for the Client PC only. * You cannot install the alternate Printer Driver of Windows 95/98/Me on the Windows NT4.0/2000/XP Server because the Installer detects the OS on which the driver is going to be installed. * If you copy the files in the faxsetup folder in the CD-ROM to the hard disk on your PC and then do the installation, change the properties of the "instdrv.ini" and "uninst.ini" files following the procedure below: Right-click the file and select Properties, clear the Read-only check box, and then select the Archive check box. * NetSpot Suite Service is necessary when setting up the printer configuration automatically or when using the Job Accounting feadure. To install using the Add Printer Wizard: 1. Click the Start button, point to Settings, and then click Printers. 2. In the Printers folder, double-click the Add Printer icon to start the Add Printer Wizard. 3. Confirm the Wizard is started, and then click the Next button. 4. Follow the instructions on the screen to continue with the installation. 5. Insert the Driver Software CD into the CD-ROM drive, and then click the Have Disk button. 6. Click the Browse button to select the folder of the driver you want to install, and then click the OK button. Windows 95/98/Me: \Fax\Drivers\us_eng\fax\win9x_me Windows NT4.0: \Fax\Drivers\us_eng\fax\winnt40 Windows 2000/XP: \Fax\Drivers\us_eng\fax\win2k_xp 7. Select your fax model from Printers, and then click the Next button. 8. Follow the instructions on the screen to continue, and then click the Finish button to start copying the files. You are now ready to send a fax from any Windows software application. Accessing Help Information ========================== In the Properties dialog box, you can click the Help button to display the information about the Canon fax driver. You can also click the ? button in the upper right corner of dialog boxes and then click a specific item in a dialog box for help with that item. Cautions, Limitations and Restrictions ====================================== 1. Custom paper sizes are not available for sending a fax. 2. If you are using iR210 or GP200-225 and sending a fax in Windows NT4.0, sending a different cover page to each recipient is not supported. 3. Do not specify more than 1 for the Copies option in the application since the fax may be sent more than once in some applications when the Copies option is specified in the application. 4. Only iR330-400 System Version 2.0 (or later) is supported by the printer driver version 4.2 (or later) and fax driver version 1.2 (or later). 5. Specify a NetWare Server name or NDS tree name up to 15 characters. 6. For Windows 2000/XP when installing with Add Printer from the Printer Folder, the Cannot find Digital Signature message may appear. If this message appears, continue with the installation. The printer will install correctly. 7. When using Terminal Server for Windows NT/2000, or sharing Windows XP by multiple users, it is not available to use the Job Accounting feature or set up printer configuration automatically. <END OF README.TXT>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.