DOS flash loader utility, Version 1.0.
Supported I/O: COM1 (3f8), COM2 (2f8), COM3 (3e8), COM4 (2e8).
Supported IRQs: 1 thru 15.
Usage: dosflash [port] [irq]
User must specify a COM port. Specification of IRQ is optional.
If no IRQ is specified, the following standard assignments are used:
COM1,IRQ 4
COM2,IRQ 3
COM3,IRQ 4
COM4,IRQ 3
If the modem has a non-standard IRQ assignment the user must
specify the IRQ number after the COM port.
Example1: if the modem is on COM3 with IRQ 7, the user must enter "dosflash 3 7".
Example2: if the modem is on COM1 with IRQ 4, the user can either enter
"dosflash 1" or "dosflash 1 4".
-----------------------------------------------------------------------------------------------------------------
Warning:When you use the flash loader,between flash erase & programming,don't pop
your modem card. Also,don't shutdown your machine.If you do this,your
modem card will be damaged,and it can't fix by any program itself.
-----------------------------------------------------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.