Copyright Avaya 2004 All rights reserved This file is the Readme for SIP software Release 1.1 for the Avaya 4602 and 4602SW SIP Telephone. There are six files that apply when converting a 4602 & 4602SW from a H.323 to a SIP Phone (Note: The 4602 and 4602SW are shipped from the factory with H.323 Software) See the 4602 SIP Telephone Release 1.0 Administrator's Guide for additional details. sip_4602bt1_1.ebin - The 4602/02SW SIP boot file, loaded on HTTP server. sip_4602ap1_1.ebin - The 4602 SIP application file, loaded on HTTP server. sip_4602D01A.txt - 4602 SIP Configuration file, loaded on HTTP server. sip_4602D02A.txt - 4602SW SIP Configuration file, loaded on HTTP server. 323tosip1_1.bin - H.323 to SIP conversion boot file, loaded on TFTP server. 46xxupgrade.scr - The script the IP Telephones will download while running H.323 software. This script may require customization for the user's environment - See 4602SIP Administration Guide for details. There are two files that apply when converting a 4602 & 4602SW from a SIP to a H.323 Phone. See the 4602 SIP Telephone Release 1.1 Administrator's Guide for additional details. sipto323_1_1.ebin - SIP to H.323 conversion boot file, loaded on HTTP server 46xxupgrade.scr - The script the IP Telephones will download while running H.323 software. This script may require customization for the users environment - see 4602SIP Administration Guide for details. Loaded on TFTP server. NEW FEATURES IN 4602 & 4602SW (Note: English only): R1.1 contains the following new feature: . Phone operation verified on Avaya SIP Solution with the phone Optim administered . Call Log - Time and date stamp provided (Note: English only). KNOWN ISSUES in R1.1 (configured using Avaya's CCS and Avaya Communications Manager with the 4602SIP configured configured as Off-PBX-telephone using OPS application and the 4602SIP Phone). NOTE: The 4602SIP phone hotlined with the Avaya SIP Solution is NO longer supported. . For the 4602SIP phone to operate properly with the Avaya SIP solution use the following Avaya CM 2.1.1 (414.1- SWUD 7545 or higher) CCS2.1 Cruiser/Prowler FW V93. . An HTTP server is required for installing and upgrading SIP software . Using option 172 with Lucent QIP DHCP server causes problems for the 4620SW and 4610SW IP Phones. Your 4620SW and 4610SW IP Phone must be running R2.0.1 to avoid this problem. . To use G729 or G729A with Avaya Communication Manager, you must administer the G.729 and G.729B or (G.729AB) as supported codecs on Communication Manager. . On outgoing calls, only called number is displayed. . Cannot change the http server IP address from the phone admin web page if DHCP is enabled. Must be set via DHCP option 172 or other configured DHCP SSON option number. . Displayed outgoing call log is not updated unless the browser is refreshed manually. . The state of the 2nd Ethernet port (port 1) is not properly reported under status. . Can only set VLAN via the dial pad or configuration file. Not through DHCP. . Since the ConfigHttpSrvr parameter must be an IP address (versus a URL), this means that only one config file can be used to pass parameters to the phone. This also implies that only one VlanId can be passed to the phones unless multiple HTTP servers are used. Therefore if more than one VLAN Id is used at a site, they must be configured manually on the phone, or additional HTTP servers are needed. . This release does not support Silence suppression. . During download filename display may be inconsistent and unreadable. . When converting from SIP to H323, configuration information is not preserved. Once the H.323 code is loaded, the phone must be configured for the desired H.323 configuration addressing. . Default password for user web page based on last 4 digits of phone's MAC address must be lower case. . The maximum length of the user web page password is 17 characters. . International Tones are not supported (such as dialtone). . With the Avaya SIP solution, call forwarding via the 4602SIP is not supported. Call Forwarding should be done via the OTPIM feature. . Under certain unusual conditions, if the line appearance icon shows an active call, but there is no voice path, press the line appearance button of the active call to get the voice path to return. . When converting from SIP to H.323, the TFTP server must have H.323 software version R1.82 or greater. See the 4602 SIP Telephone Release 1.1 Administrator's Guide (document no. 16-300037) for more information on installing and configuring your 4602 AND 4602SW SIP Telephone at: www.avaya.com/support For details on phone features of your 4602 and 4602SW SIP Telephone,see the 4602 SIP Telephone Release 1.1 User's Guide (document no. 16-300035) at: www.avaya.com/supportDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.